Multiwalled carbon nanotubes (MWCNTs) were oxidized using a mixture of H₂SO₄ and HNO₃, and the oxidized MWCNTS were decorated with magnetite (Fe₃O₄). Finally, poly-N-isopropyl acrylamide-co-butyl acrylate (P-NIPAM) was added to obtain P-NIPAM/Fe/MWCNT nanocomposites. The nanosorbents were characterized by various techniques, including X-ray diffraction, transmission electron microscopy, scanning electron microscopy, thermogravimetric analysis, and Brunauer–Emmett–Teller analysis. The P-NIPAM/Fe/MWCNT nanocomposites exhibited increased surface hydrophobicity. Owing to their higher adsorption capacity, their kerosene removal efficiency was 95%; by contrast, the as-prepared, oxidized, and magnetite-decorated MWCNTs had removal efficiencies of 45%, 55%, and 68%, respectively. The P-NIPAM/Fe/MWCNT nanocomposites exhibited a sorbent capacity of 8.1 g/g for kerosene removal from water. The highest kerosene removal efficiency from water was obtained at a process time of 45 min, sorbent dose of 0.005 g, solution temperature of 40 °C, and pH 3.5. The P-NIPAM/Fe/MWCNTs showed excellent stability after four cycles of kerosene removal from water followed by regeneration. The reason may be the increase in the positive charge of the polymer at pH 3.5 and the increased adsorption affinity of the adsorbent toward the kerosene contaminant. The pseudo second-order model was found to be the most suitable model for studying the kinetics of the adsorption reaction.

The social and ecological influence of Neonicotinoids (NEOs) usage in agriculture sector is progressively higher. There are seven NEOs insecticides widely used for the insects control. Among the NEOs, thiacloprid (THD) was extensively used for insect control during crop cultivation. This study targets to analyse the contamination levels of NEOs in agricultural soil and identify photo-biodegradation of THD degradation using pure isolates and mixed consortium. The photo degradation (PD), biodegradation (BD) and photo-biodegradation (PBD) of THD were compared. The corn field agricultural soils were polluted by four NEOs, among them THD had greater contamination level (surface soil: 3901.2 ± 0.04 μg/g) and (sub-surface soil: 3988.6 ± 0.05 μg/g). Three soil free enriched bacterial strains following Bacillus atrophaeus (PB-2), Priestia megaterium (PB-3) (formerly known as Bacillus megaterium), and Peribacillus simplex (PB-4) (formerly known as Bacillus simplex) were identified by microbiological and molecular 16s rRNA gene sequencing. The PD, BD and PBD of THD were conducted and degradation rate was detected by instrument UPLC-MS-MS. The PBD process with blue-LEDs showed better THD degradation efficiency than PD and BD, where the specific THD degradation rate was 85 ± 0.2%, 87 ± 0.5%, and 89 ± 0.3%, respectively for PB-2, PB-3 and PB-4. Then, the photo-biodegradation performance is greater at 150, 175, 200 rpm, pH 7.0–9.0, and temperature 30–35 °C. After the PBD system deliver four intermediate metabolites, the THD degradation process maybe through nitro reduction, hydroxylation and oxidative cleavage pathway.

The current study is the first attempt to prepare nanocomposites of Eleocharis dulcis biochar (EDB) with nano zero-valent Copper (nZVCu/EDB) and magnetite nanoparticles (MNPs/EDB) for batch and column scale sequestration of Congo Red dye (CR) from synthetic and natural water. The adsorbents were characterized with advanced analytical techniques. The impact of EDB, MNPs/EDB and nZVCu/EDB dosage (1–4 g/L), pH (4–10), initial concentration of CR (20–500 mg/L), interaction time (180 min) and material type to remove CR from water was examined at ambient temperature. The CR removal followed sequence of nZVCu/EDB > MNPs/EDB > EDB (84.9–98% > 77–95% > 69.5–93%) at dosage 2 g/L when CR concentration was increased from 20 to 500 mg/L. The MNPs/EDB and nZVCu/EDB showed 10.9% and 20.1% higher CR removal than EDB. The adsorption capacity of nZVCu/EDB, MNPs/EDB and EDB was 212, 193 and 174 mg/g, respectively. Freundlich model proved more suitable for sorption experiments while pseudo 2nd order kinetic model well explained the adsorption kinetics. Fixed bed column scale results revealed excellent retention of CR (99%) even at 500 mg/L till 2 h when packed column was filled with 3.0 g nZVCu/EDB, MNPs/EDB and EDB. These results revealed that nanocomposites with biochar can be applied efficiently for the decontamination of CR contaminated water.

The objective of this study was to demonstrate the feasibility and the relevance of combining biochar with the Fenton process for the simultaneous improvement of polycyclic aromatic hydrocarbons (PAHs) degradation and immobilization of heavy metals (HMs) in real soil remediation processes at circumneutral pH. The evaluation of PAHs degradation results was performed through multivariate statistical tools, including principal component analysis (PCA) and partial least squares (PLS). PCA showed that the level of biochar amendment decisively affected the degree of degradation of total PAHs, highlighting the role of biochar in catalyzing the Fenton reaction. Moreover, the PLS model was used to interpret the important features of each PAH's physico-chemical properties and its correlation to degradation efficiency. The electron affinity of PAHs correlated positively with the degradation efficiency only if the level of biochar amendment sat at 5%, explained by the ability of biochar to transfer the electrons to PAHs, improving the Fenton-like degradation. Moreover, the addition of biochar reduced the mobilization of HMs by their fixation on their surface, reducing the Fenton-induced metal leaching from the destruction of metal-organic complexes. In overall, these results on the high immobilization rate of HMs accompanied with additional moderate PAHs degradation highlighted the advantages of using a biochar-assisted Fenton-like reaction for sustainable remediation of technogenic soil.

Leaching of herbicides in cropping soils not only impacts the groundwater sources but also reduces their effect in controlling weeds. Leaching studies were carried out in two cropping soils and two forestry biowaste media, wood pulp and sawdust with two herbicides, atrazine and bromacil in a packed lysimeter with simulated rainfall. The hypothesis was that high organic matter forestry biowaste soil amendments reduce the leaching of herbicides through the soil profile. Results from the experimental setups varied due to the impact of the simulated rainfall on the surface structure of the media. Organic carbon content, pH and structure of the media were all factors which affected the leaching of the two herbicides. The hypothesis was true for wood pulp, but for sawdust, organic matter content had less bearing on the leaching of the herbicides than other over-riding factors, such as pH, that were media specific. In sawdust, its large particle size and related pore volume allowed preferential flow of herbicides. Overall, the data indicated that both forestry biowastes were retentive to herbicide leaching, but the effect was more pronounced with wood pulp than sawdust.

Titanium dioxide nanoparticles (TiO₂ NPs) easily combine with other pollutants such as heavy metals because of their excellent physiochemical properties. However, how such an interaction may affect the binding behavior of metals onto biofilms remains largely unclear. This study, examined the effects of TiO₂ NPs on Cd²⁺ accumulation and toxicity for natural periphytic biofilms were examined. The adsorption kinetics showed that adding 0.1 and 1 mg/L TiO₂–NPs increased the Cd²⁺ adsorption of biofilms at equilibrium by 23.5% and 35.8%, respectively. However, adding 10 mg/L TiO₂ NPs increased the Cd²⁺ adsorption of biofilms at equilibrium by only 1.9%. The adsorption isotherms indicate that the presence of TiO₂ NPs considerably increased the Cd²⁺ adsorption capacity of the biofilms; however, this effect became less prominent at high TiO₂ NP concentrations. The optimum pH for Cd²⁺ adsorption increased with increasing Cd²⁺ and TiO₂ NP contents. At low concentrations, the coexistence of Cd²⁺ and TiO₂ NPs may facilitate their respective accumulation by stimulating the secretion of extracellular polymeric substances and enhancing the microbial activity of the biofilm. The presence of TiO₂ NPs increases the surface binding energy between Cd²⁺ and functional groups such as carboxyl groups, enhancing the Cd²⁺ accumulation on the biofilm.

Amoxicillin (AMO) and amikacin (AMK) are broad-spectrum antibiotics that are most preferably given post-delivery (normal and cesarian) in the maternity hospitals located in Sagar city (Madhya Pradesh), India. Both the antibiotics make their way through sewage/drainage systems into the environment in the form of metabolized and unmetabolized compounds. Growing concern about the contamination of wastewater by antibiotics requires fast, sensitive and eco-friendly techniques. Therefore a simple, rapid and environmental friendly chromatographic method has been developed for simultaneous determination of AMO and AMK in maternity hospital wastewater samples. A micellar liquid chromatographic (MLC) method was developed with a C₁₈ column (250 mm × 4.6 mm), sodium dodecyl sulphate (SDS; 0.15 M), 1-butanol (7%) as a modifier, pH 5 and photo diode detector (PDA) at 270 nm and 256 nm for AMO and AMK respectively. The method was fast with analysis time below 9 min. In the present MLC method, linearities (r > 0.998), limits of quantification in the range of 0.02–0.04 μg/mL, repeatabilities, and intermediate precision below 4.9% were adequate for the quantification of AMO and AMK. The proposed method can be utilized to detect and quantify both the antibiotics in various samples by hospitals, pharmaceutical companies, pollution control board, municipal corporations, etc.

Nanoplastics (NPs) are becoming emerging pollutants of global concern. Understanding the environmental behavior of NPs is crucial for their environmental and human risk assessment. In this study, the aggregation and stability of polystyrene (PS) NPs were investigated under different hydrochemical conditions such as pH, salt type (NaCl, CaCl₂, Na₂SO₄), ionic strength (IS), and natural organic matter (NOM). The critical coagulation concentrations of PS NPs were determined to be 158.7 mM NaCl, 12.2 mM CaCl₂, and 80.0 mM Na₂SO₄. Ca²⁺ was more effective in destabilizing PS NPs, compared to Na⁺, owing to its stronger charge screening effect. In the presence of monovalent ions, NOM reduced aggregation through steric repulsion, whereas in the case of divalent ions, NOM induced aggregation through cation bridging. Initial and long-term stability studies demonstrated that, in waters with high IS and NOM content, NOM was the most significant factor affecting NPs aggregation. PS NPs would be highly suspended in all freshwaters, and even in wastewater, whereas they would aggregate rapidly and deposit in seawater. Finally, a statistical model was established to evaluate the hydrodynamic diameter of NPs in different waters. The results indicated the stability of PS NPs in natural aquatic environments and their potential for long-term transport.

In this study, a novel biosorbent is prepared from the pods of Bauhinia variegata is used for defluoridation of the fluoride contaminated water. It is an eco-friendly and economically feasible material. Comparison of adsorption capacity of Physically Treated Bauhinia (PTB) and Chemically Treated Bauhinia (CTB) are carried in this work. Characterization studies like SEM, EDS, FTIR, and XRD are executed to analyze surface morphology and functional groups in PTB and CTB. The experimental procedure was implemented in a batch process where the operating constraints such as dosage, pH, initial fluoride concentration, time, and temperature are varied to attain optimized efficiency. PTB and CTB yield an adsorption capacities of 10.90 mg/g and 15.45 mg/g respectively in the batch process. PTB adheres fluoride in monolayer formation whereas CTB forms multilayer adsorption. The adsorption process was described by the Pseudo first-order model to state the mechanism of physisorption. The negative values of thermodynamic parameters indicate spontaneity and favorable conditions for adsorption process. As CTB has a higher adsorption capacity than PTB, the batch study has been extended to column adsorption. Bed depth, initial fluoride concentration, and flow rate are the experimental variables used to acquire breakthrough curves. Simplified column models like Adam-Bohart, Thomas, and Yoon-Nelson models were analyzed. In column studies, Yoon-Nelson model fitted well in describing the process of adsorption. The maximum adsorption capacity acquired during the column process was found to be 1.176 mg/g with a bed depth of 5 cm and a flow rate of 5 ml/min. Thus, the innocuous and sustainable adsorbent is developed and serves as an excellent defluoridation agent.

This study demonstrated that nitrogen-doped carbon materials (NCMs) could effectively catalyze the chlorine elimination process in hexachloroethane (HCA) declorination in sulfide-containing environments for the first time. The kₒbₛ values of HCA dechlorination by sulfide in the presence of 10 mg/L NCMs were higher than that of no mediator at pH 7.3 by one or two orders of magnitude. The catalytic capabilities of NCMs on HCA dechlorination were evident in common ranges of natural pH (5.3–8.9) and it could be accelerated by the increase of pH but be suppressed by the presence of dissolved humic acid. Moreover, NCMs exhibited much better catalytic capability on HCA dechlorination compared to the carbon materials, mainly owing to the combined contributions of pyridine N, including enhanced nucleophilic attack to HCA molecule by generating newborn C–S–S and activation of HCA molecule by elongating C–Cl bonds. The functions of pyridine N in micron-sized NCMs with mesopores were better than in nano-sized NCMs on HCA dechlorination. These findings displayed the potential of NCMs, when released into sulfide-containing environments, may significantly increase the dechlorination of chlorinated aliphatic hydrocarbons.