Canopy leaf area index (LAI) is an important structural parameter of the vegetation controlling pollutant uptake by terrestrial ecosystems. This paper presents a computationally efficient algorithm for retrieval of vegetation LAI and canopy clumping factor from satellite data using observed Simple Ratios (SR) of near-infrared to red reflectance. The method employs numerical inversion of a physics-based analytical canopy radiative transfer model that simulates the bi-directional reflectance distribution function (BRDF). The algorithm is independent of ecosystem type. The method is applied to 1-km resolution AVHRR satellite images to retrieve a geo-referenced data set of monthly LAI values for the conterminous USA. Satellite-based LAI estimates are compared against independent ground LAI measurements over a range of ecosystem types. Verification results suggest that the new algorithm represents a viable approach to LAI retrieval at continental scale, and can facilitate spatially explicit studies of regional pollutant deposition and trace gas exchange. The paper presents a physics-based algorithm for retrieval of vegetation LAI and canopy-clumping factor from satellite data to assist research of pollutant deposition and trace-gas exchange. The method is employed to derive a monthly LAI dataset for the conterminous USA and verified at a continental scale.

An integrative passive sampler consisting of a C18 Empore® disk receiving phase saturated with n-octanol and fitted with low-density polyethylene diffusion membrane was calibrated for the measurement of time-weighted average concentrations of hydrophobic micropollutants, including polyaromatic hydrocarbons and organochlorine pesticides, in water. The effect of temperature and water turbulence on kinetic and thermodynamic parameters characterising the exchange of analytes between the sampler and water was studied in a flow-through system under controlled conditions. It was found that the absorption of test analytes from water to the sampler is related to their desorption to water. This allows for the in situ calibration of the uptake of pollutants using offload kinetics of performance reference compounds. The sampling kinetics are dependent on temperature, and for most of the tested analytes also on the flow velocity. Sampler–water partition coefficients did not significantly change with temperature.

Interest in selenium pollution and remediation technology has escalated during the past two decades. Although not known to be essential for plants, selenium is essential but could be toxic for humans and animals, depending on its concentration. A major selenium controversy in the 1980's emerged in California when the general public and scientific community became aware of selenium's potential as an environmental contaminant. After extensive research on several strategies to reduce loads of mobile Se for entering the agricultural ecosystem a plant-based technology, defined as 'phytoremediation' received increasing recognition, as a low-cost environmentally friendly approach for managing soluble Se in the soil and water environment. Successful long-term field remediation of Se by plants is, however, dependent upon acceptance and widespread use by growers, who are also concerned about potential commercial value from using the plant-based technology. Obtaining products with economic value from plants used in the cleanup of soil would certainly be an additional benefit to phytoremediation, which could help sustain its long-term use.

A pesticide runoff event was simulated on two 10 m x 50 m constructed wetlands (one non-vegetated, one vegetated) to evaluate the fate of methyl parathion (MeP) (Penncap-M). Water, sediment, and plant samples were collected at five sites downstream of the inflow for 120 d. Semi-permeable membrane devices (SPMDs) were deployed at each wetland outflow to determine exiting pesticide load. MeP was detected in water at all locations of the non-vegetated wetland (50 m), 30 min post-exposure. MeP was detected 20 m from the vegetated wetland inflow 30 min post-exposure, while after 10d it was detected only at 10 m. MeP was measured only in SPMDs deployed in non-vegetated wetland cells, suggesting detectable levels were not present near the vegetated wetland outflow. Furthermore, mass balance calculations indicated vegetated wetlands were more effective in reducing aqueous loadings of MeP introduced into the wetland systems. This demonstrates the importance of vegetation as sorption sites for pesticides in constructed wetlands.

The removal of phenanthrene, anthracene and benzo(a)pyrene added at three different concentrations was investigated with or without earthworms (Eisenia fetida) within 11 weeks. Average anthracene removal by the autochthonous micro-organisms was 23%, 77% for phenanthrene and 13% for benzo(a)pyrene, while it was 51% for anthracene, 47% for benzo(a)pyrene and 100% for phenanthrene in soil with earthworms. At 50 and 100 mg phenanthrene kg−1E. fetida survival was 91% and 83%, but at 150 mg kg−1 all died within 15 days. Survival of E. fetida in soil amended with anthracene ≤1000 mg kg−1 and benzo(a)pyrene ≤150 mg kg−1 was higher than 80% and without weight loss compared to the untreated soil. Only small amounts of PAHs were detected in the earthworms. It was concluded that E. fetida has the potential to remove large amounts of PAHs from soil, but more work is necessary to elucidate the mechanisms involved.

Human transport by land, sea and air has increased exponentially through time in intensity, paralleling rises in population, prosperity and rates of technological change. Transport has considerable ecological effects, many of them detrimental to environmental sustainability. This volume brings together international experts from a variety of disciplines to review the ecological effects and their causes in terms of road, rail, ship and aircraft transport. The contributors have different attitudes and agendas. Some are ecologists, some planners, others social scientists. Focus ranges from identification of threats and amelioration of damaging effects through to future design of transport systems to minimize environmental degradation. Some chapters consider restricted areas of the globe; others the globe itself. Views encompass deep pessimism and cautious optimism. Uniquely, the volume considers transport effects in all environments. This is the first book that attempts to discuss the relationship between human transport and all ecosystems. It appeals not only to the specialist environmentalist by picking out novel topics, but also to anyone involved in transport issues as it tackles the issues from an historical perspective, encompassing the past, present and future of the effects of human transport.

Preliminary leaching column and greenhouse plant uptake studies were conducted in two soils with contrasting characteristics amended with varying rates (0 to 148.3 Mg ha-1) of incinerated sewage sludge (ISS) and weathered sewage sludge (WISS) to estimate the leaching losses of trace elements from the soils amended with incinerated sewage sludge by products and to evaluate the uptake and accumulation of these elements in various parts of Sorghum vulgaris var. sudanense Hitche. (“Sorgrass''), a Sorghum-Sudan grass hybrid. Results of this study indicated that leaching of Cr, Cd, Zn, Cu, Ni, Fe and Mn from soils amended with ISS and WISS increased with increasing rates of amendment. Results of the leaching column study further revealed greater leaching losses from coarse-textured soil compared to medium-textured soil and also from ISS amended soils than with WISS amended soils. Results further suggested that the type of element and the interaction between the element and soil properties affected the leachability of various trace elements. The uptake study indicated uptake and accumulation of trace elements by plant parts increased with increasing rates of amendments. Greater plant uptake and accumulation of trace elements were observed in plant parts grown in soils amended with ISS compared to that of WISS. Results also indicated a greater accumulation of trace elements in below ground part of the plants (roots) compared to that was observed in above ground parts (shoots). Limited data obtained from this one season preliminary studies demonstrated that incinerated sewage sludge products from wastewater treatment plants could be used as soil amendments at low application (no more than 24.7 Mg ha-1) for optimum plant growth, and dry matter yield without resulting in substantial accumulation of metals in plant parts at concentrations above the recommended critical limits and without causing significant leaching losses of various trace elements. It is imperative that long-term field studies are necessary to evaluate the long-term impact of using these new products in leaching and accumulation of various trace elements in plants and soils.

This investigation examines metal release from freshwater sediment using sequential extraction and single-step cold-acid leaching. The concentrations of Cd, Cr, Cu, Fe, Ni, Pb and Zn released using a standard 3-step sequential extraction (Rauret et al., 1999) are compared to those released using a 0.5 M HCl; leach. The results show that the three sediments behave in very different ways when subject to the same leaching experiments: the cold-acid extraction appears to remove higher relative concentrations of metals from the iron-rich sediment than from the other two sediments. Cold-acid extraction appears to be more effective at removing metals from sediments with crystalline iron oxides than the “reducible” step of the sequential extraction. The results show that a single-step acid leach can be just as effective as sequential extractions at removing metals from sediment and are a great deal less time-consuming.

The objective of this study was to examine the chemistry of trace elements in coalbed methane (CBM) discharge water reacting with semi-arid ephemeral stream channels in Powder River Basin, Wyoming. The study area consisted of two ephemeral streams, Burger Draw and Sue Draw. These streams are tributaries to the perennial Powder River, Wyoming. Samples were collected bimonthly from three CBM discharge points and seven channel locations in Burger Draw and Sue Draw. Samples were also collected bimonthly from the Powder River above and below the confluence of Burger Draw. Before sample collection, pH, temperature, dissolved oxygen (DO), and turbidity were measured in the field. Samples were transported to the laboratory and analyzed for dissolved trace elements including iron (Fe), manganese (Mn), boron (B), arsenic (As), selenium (Se), and fluoride (F). Results suggest pH of discharge water was 7.1 and increased significantly in the downstream channel of Burger Draw to 8.84 before joined with the Powder River. Temperature of CBM produced water at discharge points ranged between 20.3 and 22.7 [composite function (small circle)]C. Before discharge, DO concentrations of CBM produced water were between 1.42 and 1.5 mg/L. No significant differences in temperature, DO, and turbidity were found between Burger Draw flow and Powder River flow. However, significant differences were found within the sampling period in temperature and turbidity in flow of Burger Draw. The temperature, DO, and turbidity were all significantly different in Powder River within the sampling period. The CBM discharge water consisted of higher concentrations of F, Fe and B compared to other components. Significant changes were observed for Fe, Mn, and As; and seasonally for B. Dissolved Fe and Mn decreased, while As and Se increased in downstream channel flow. These findings will be useful in proper management of CBM produced water in semi-arid environments.