This study assesses heavy metal levels in water, soil, and vegetables (swiss chard, lettuce, cabbage, collard green, tomato, green pepper and carrot) irrigated with waste water in Gamo, Ethiopia. The samples of soils, water, and vegetables were randomly collected, processed, and analyzed for heavy metals using atomic absorption spectrophotometry. The results obtained show that the irrigational water is profoundly contaminated with heavy metals Cd, Cr and Ni and Pb, Zn and Cu had the lowest concentration in irrigation water. The levels of Cd in Kulfo river area and Chamo Lake area and Ni in most of the farm soils were also found to be higher than the guideline values. The study also revealed that the mean levels of Cd in most vegetables and Cr and Pb in some vegetables were higher than the maximum recommended limits set by WHO/FAO. In general the results show that the highest concentration of the heavy metals was obtained from Kulfo river area compared to the Arbaminch textile share company area, Abaya Lake area, and Chamo Lake area. Cabbage was maximally contaminated with potential toxic elements followed by Swiss-chard, carrot, tomato, collard green, green pepper and lettuce. Hence, from kulfo river area frequent consumption of cabbage and Swiss chard may cause serious health risks to consumers. The levels of many elements were found to vary with location, suggesting localized inputs of the various contaminants related to industrial and other activities that generate wastewater. This study recommends regular monitoring of heavy metals in soils, waters, and foodstuffs to prevent excessive accrual in food chain.

In this study, the estimated amounts of discarded face masks due to COVID 19 were investigated. In this context, the amount of waste face masks was determined separately according to the mask types used (nonwoven, meltblown, and 3-ply, pleated) and the importance of waste face masks was revealed. According to obtained data, the estimated total daily face mask use in Turkey is 72,351,638. The highest amounts of nonwoven, meltblown, and 3-ply face mask waste were determined as 26.88, 36.29, and 43.68 tonnes/day for İstanbul city, respectively. Total amounts of nonwoven, meltblown and 3-ply face mask waste in Turkey were calculated as 144.7, 195.35, and 235.14 tonnes/day, respectively. The top 5 provinces with the highest amount of waste masks are listed as follows; İstanbul (nonwoven=26.88, meltblown=36.29, 3ply=43.68 tonnes/day), Ankara (nonwoven=9.91, meltblown=13.38, 3ply=16.11 tonnes/day), İzmir (nonwoven=7.76, meltblown=10.47, 3ply=12.61 tonnes/day), Bursa (nonwoven=5.40, meltblown=7.29, 3ply=8.78 tonnes/day), and Antalya (nonwoven=4.45, meltblown=6.01, 3ply=7.23 tonnes/day), respectively. In Turkey, 91.3% of medical waste collected in health institutions in 2019 (90,920 tonnes) was sterilized and disposed of in storage areas (83,010 tonnes). 8.7% of medical waste was sent to incineration facilities and disposed (7,910 tonnes). Considering these values, 132, 178.35, and 214.7 tonnes/day of nonwoven, meltblown, and 3-ply face mask wastes can be disposed by sterilization and the remaining 12.7, 17, and 20.44 tonnes/day by incineration, respectively.

In Mirzapur (U.P.), a power-starved district, the UASB (Upflow Anaerobic Sludge Blanket) technique was adopted. Almost all of the available technologies do not treat heavy metals, so, is the case with the UASB also. The present study is to assess how much heavy metal can get accumulated in plant tissues in different species. The result of the present study was that the concentration of Pb(1106.31)>Zn(221.45)>Cd(49.26)>Hg(23.37) mg/Kg in the sludge while the concentration of Zn(93.35)>Pb(52.00)>Hg(16.93)>Cd(1.53) mg/Kg in the soil. When the sludge was mixed with the soil the trend got changed and the trend was Pb(596.36)>Zn(219.86)>Cd(24.70)>Hg(22.63) mg/Kg. Three different species that were chosen for the study were Basella Alba (Spinach), Solanum Lycopersicum (Tomato) & Brassica Juncea (Mustard). The trend of accumulation of studied heavy metals in the Brassica Juncea (Mustard) was Zn(85.33)>Pb(25.88)>Hg(11.23)>Cd(0.99) mg/Kg. In Solanum lycopersicum (Tomato) the trend was Pb(231.11)>Zn(108.72)>Hg(12.43)>Cd(9.41) mg/Kg  and in Basella alba (Spinach) was Zn(103.81)>Pb(83.90)>Hg(10.78)>Cd(4.18) mg/Kg. Overall the study reveals that the accumulation of heavy metals takes place in plants grown in soil mixed with sewage sludge. The reduction in the concentration of Pb, Cd, Hg and Zn in sludge mixed with soil after the harvesting of plant in case of Solanum lycopersicum were 39.38%, 47.93%, 6.18% and 49.89% respectively; while in case of Basella alba these were 25.23%, 57.53%, 71.58% and 49.16% respectively; and in case of Brassica Juncea these reduction were 25.86%, 60.80%, 70.96% and 49.04% respectively.

The assessment of groundwater quality is essential for the conservation of natural resources. Hence, this study aims to assess the hydrochemistry of groundwater in and around the Nagalapura Taluk in Bellary district, Karnataka, India. The groundwater quality variables are mapped using a Geographic Information System (GIS). For the hypothesis, the mean value of ten groundwater quality variables was obtained from 50 bore well samples (2016-2018). To assess the lead ions and type of water, the USSL, SAR, and Na% were measured. Ionic ratio and Gibbs graphs were used to demonstrate the chemical reactions in the water samples. ArcGIS was used for spatial analysis of the quality variables. The results showed the order of Cl- > SO42- > HCO3- with water types Na+-Cl- and Cl-, and the order of Na+ > Mg++ > Ca++ > K+ with Na+ and Mg++ as the dominant anion and cation, respectively. The hydrochemistry of groundwater is determined by the geological structure in 64 percent of the water samples examined. The Wilcox diagram shows that no-alkali exposure to the crops is expected. Forty one samples (82%) fit within the C3-S1 group; this category is fit for irrigational needs. Only 01 and 03 samples showed maximum SAR during two seasons like pre-monsoon and post-monsoon periods. The maps showed that groundwater in the selected sites is usually of higher quality, whereas the presence of dolomite indicates a reduction in water quality.

High-density samples are usually a prerequisite for obtaining high-precision source apportionment results in large-scale areas. In-situ field portable X-ray fluorescence spectrometry (FPXRF) is a fast and cheap way to increase the sample size of soil heavy metals (HMs). Moreover, categorical land-use types may be closely associated with source contributions. However, the above information has rarely been incorporated into the source apportionment. In this study, robust geographically weighted regression (RGWR) was first used to correct the spatially varying effect of the related soil factors (e.g., soil water and soil organic matter) on in-situ FPXRF in an urban-rural fringe of Wuhan City, China, and the correction accuracy of RGWR was compared with those of the traditionally non-spatial multiple linear regression (MLR) and basic GWR. Then, the effect of land-use types on HM concentrations was partitioned using analysis of variance (ANOVA). Last, based on the robust spatial receptor model (i.e., robust absolute principal component scores/RGWR [RAPCS/RGWR]), this study proposed RAPCS/RGWR with categorical land-use types and RGWR-corrected in-situ FPXRF data (RAPCS/RGWR_LU&FPXRF), and its performance was compared with those of RAPCS/RGWR with none or one kind of auxiliary data. Results showed that (i) the performances of the correction models for in-situ FPXRF data were in the order of RGWR > GWR > MLR, and the relative improvement of RGWR over MLR ranged from 52.6% to 70.71% for each HM; (ii) categorical land-use types significantly affected the concentrations of soil Zn, Cu, As, and Pb; (iii) the highest estimation accuracy for source contributions was obtained by RAPCS/RGWR_LU&FPXRF, and the lowest estimation accuracy was obtained by basic RAPCS/RGWR. It is concluded that land-use types and RGWR-corrected in-situ FPXRF data are closely associated with the source contribution, and RAPCS/RGWR_LU&FPXRF is a cost-effective source apportionment method for soil HMs in large-scale areas.

A vast amount of evidence indicates that bisphenol A (BPA) and phthalates are widely distributed in the environment since these compounds are mass-produced for the manufacture of plastics and plasticizers. These compounds belong to a large group of substances termed endocrine-disrupting chemicals (EDC). It is well known that humans and living organisms are unavoidably and unintentionally exposed to BPA and phthalates from food packaging materials and many other everyday products. BPA and phthalates exert their effect by interfering with hormone synthesis, bioavailability, and action, thereby altering cellular proliferation and differentiation, tissue development, and the regulation of several physiological processes. In fact, these EDC can alter fetal programming at an epigenetic level, which can be transgenerational transmitted and may be involved in the development of various chronic pathologies later in the adulthood, including metabolic, reproductive and degenerative diseases, and certain types of cancer.In this review, we describe the most recent proposed mechanisms of action of these EDC and offer a compelling selection of experimental, epidemiological and clinical studies, which show evidence of how exposure to these pollutants affects our health during development, and their association with a wide range of reproductive, metabolic and neurological diseases, as well as hormone-related cancers. We stress the importance of concern in the general population and the urgent need for the medical health care system to closely monitor EDC levels in the population due to unavoidable and involuntary exposure to these pollutants and their impact on human health.

Insufficient evidence exists regarding the visible physiological toxic endpoints of MPs exposures on zebrafish larvae due to their small sizes. Herein, the impacts of micro-polystyrene particles (μ-PS) and 100 nm polystyrene particles (n-PS) on the toxicity of cadmium (Cd) through altering neutrophil expressions were identified and quantified in the transgenic zebrafish (Danio rerio) larvae Tg(lyz:DsRed2), and the effects were size-dependent. When exposed together with μ-PS, the amount of neutrophils in Cd treated zebrafish larvae decreased by 25.56% through reducing Cd content in the larvae. By contrast, although n-PS exposure caused lower Cd content in the larvae, the expression of neutrophils under their combined exposure remained high. The mechanism of immune toxicity was analyzed based on the results of metabonomics. n-PS induced high oxidative stress in the larvae, which promoted taurine metabolism and unsaturated fatty biosynthesis in n-PS + Cd treatment. This observation was accordance with the significant inhibition of the activities of superoxide dismutase and catalase enzymes detected in their combined treatment. Moreover, n-PS promoted the metabolic pathways of catabolic processes, amino acid metabolism, purine metabolism, and steroid hormone biosynthesis in Cd treated zebrafish larvae. Nanoplasctis widely coexist with other pollutants in the environment at relatively low concentrations. We conclude that more bio-markers of immune impact should be explored to identify their toxicological mechanisms and mitigate the effects on the environment.

In this study, we analyzed 30 legacy and emerging poly- and perfluoroalkyl substances (PFASs) in paired atmospheric particulate and bark samples collected around a Chinese fluorochemical manufacturing park (FMP), with the aim to explore the sources of PFASs in tree bark. The results showed that PFASs in atmospheric particulate and tree bark samples were consistently dominated by perfluorooctanoate (mean 73 ng/g; 44 pg/m³), perfluorohexanoate (47 ng/g; 36 pg/m³), perfluorononanoate (9.1 ng/g; 8.8 pg/m³), and 10:2 fluorotelomer alcohol (10:2 FTOH; 5.6 ng/g; 12 pg/m³). Spatially, concentrations of C₈–C₁₂ perfluoroalkyl carboxylates (PFCAs) and 10:2 FTOH all showed a similar and exponentially decreased trend in both bark and atmospheric particulate samples with the increasing distance from the FMP. For the first time, we observed strongly significant (Spearman’s correlation coefficient = 0.53–0.79, p < 0.01) correlations between bark and atmospheric particulate concentrations for C₈–C₁₂ PFCAs and 10:2 FTOH over 1–2 orders of magnitude, suggesting that the continues trapping of atmospheric particulates resulted in the accumulation of these compounds in bark. Overall, this study provides the first evidence that atmospheric particulate is an obvious source of C₈–C₁₂ PFCAs and 10:2 FTOH in tree bark. This result may further contribute to the application of tree bark as an indicator of certain PFASs in atmospheric particulate.

The oxidative potential (OP) of atmospheric fine particulate matter (PM₂.₅) has been linked to organic content, which includes polycyclic aromatic hydrocarbons (PAHs). The OP of 135 individual PAHs (including six subclasses) was measured using the dithiolthreitol (DTT) consumption assay. The DTT assay results were used to compute the concentration of each PAH needed to consume 50% of the DTT concentration in the assay (DTT₅₀), and the reduction potential of the PAHs (ΔGᵣₓₙ). Computed reduction potential results were found to match literature reduction potential values (r² = 0.97), while DTT₅₀ results had no correlations with the computed ΔGᵣₓₙ values (r² < 0.1). The GINI equality index was used to assess the electron distribution across the surface of unreacted and reacted PAHs. GINI values correlated with ΔGᵣₓₙ in UPAH, HPAH, and OHPAH subclasses, as well as with all 135 PAHs in this study but did not correlate with DTT₅₀, indicating that electron dispersion is linked to thermodynamic reactions and structural differences in PAHs, but not linked to the OP of PAHs. Three ambient PM₂.₅ filters extracts were measured in the DTT assay, alongside mixtures of analytical standards prepared to match PAH concentrations in the filter extracts to test if the OP follows an additive model of toxicity. The additive prediction model did not accurately predict the DTT consumption in the assay for any of the prepared standard mixtures or ambient PM₂.₅ filter extracts, indicating a much more complex model of toxicity for the OP of PAHs in ambient PM₂.₅. This study combined computed molecular properties with toxicologically relevant assay results to probe the OP of anthropogenically driven portions of ambient PM₂.₅, and results in a better understanding of the complexity of ambient PM₂.₅ OP.

Copper (Cu) is a vital micronutrient required for numerous fundamental biological processes, but excessive Cu poses potential detrimental effects on public and ecosystem health. However, the molecular details linking endoplasmic reticulum (ER) stress and apoptosis in duck renal tubular epithelial cells have not been fully elucidated. In this study, duck renal tubular epithelial cells exposed to Cu sulfate (CuSO₄) (0, 100 and 200 μM) and a PERK inhibitor (GSK2606414, GSK, 1 μM) for 12 h were used to investigate the crosstalk between ER stress and apoptosis under Cu exposure. Cell and ER morphological and functional characteristics, intracellular calcium (Ca²⁺) levels, apoptotic rates, ER stress and apoptosis-related mRNA and protein levels were examined. The results showed that excessive Cu could cause ER expansion and swelling, increase the expression levels of ER stress-associated genes (PERK, eIF2α, ATF4 and CHOP) and proteins (p-PERK and CHOP), induce intracellular Ca²⁺ overload, upregulate the expression levels of apoptosis-associated genes (Bax, Bak1, Caspase9 and Caspase3) and the cleaved-Caspase3 protein, downregulate Bcl-xl and Bcl2 mRNA levels and trigger apoptosis. PERK inhibitor treatment could ameliorate the above changed factors caused by Cu. In conclusion, these findings indicate that excessive Cu could trigger ER stress via activation of the PERK/ATF4/CHOP signaling pathway and that ER stress might aggravate Cu-induced apoptosis in duck renal tubular epithelial cells.