Refine search
Results 1-10 of 136
Huge quantities of microplastics are “hidden” in the sediment of China's largest urban lake—Tangxun Lake
2022
Shi, Mingming | Li, Rui | Xu, An | Su, Yewang | Hu, Tianpeng | Mao, Yao | Qi, Shihua | Xing, Xinli
Microplastics (MPs) pollution in Tangxun Lake, the largest urban lake in China, was investigated. The average MPs pollution in sediment (1.81 ± 1.75 × 10⁴ items kg⁻¹) is at a high level, while the MPs in lakeshore water (917.77 ± 742.17 items m⁻³) is in the middle to low level compared with existing studies, which is related to the government's protection. Fragments and fibers are the most common shapes in sediment and water, respectively. MPs size <1 mm dominates in the sediment, while the MPs in water has a larger size. The distribution of MPs in the inner lake shows that pellets tend to “hidden” in sediments. Suspected MPs are randomly selected for polymer detection by Micro-Raman microscopy. Polypropylene (PP), polyethylene (PE) and polyethylene terephthalate (PET) are the most common polymer types in water, sediment and atmospheric deposition MPs samples. The input of wastewater, fishery and surrounding human activities are the main sources of MPs in sediment. Atmospheric deposition has a great impact on the distribution of MPs, while the contribution of surface runoff to lake MPs is not remarkable. In addition, MPs in sediments have exceeded the environmental carrying capacity. More attention should be focused on the sediment, where huge amounts of MPs are “hidden”.
Show more [+] Less [-]Implication of microplastic toxicity on functioning of microalgae in aquatic system
2022
Parsai, Tanushree | Figueiredo, Neusa | Dalvi, Vivek | Martins, Marta | Malik, Anushree | Kumar, Arun
Microplastics (MPs) released from both primary and secondary sources affect the functioning of aquatic system. These MPs and components leached, can interact with aquatic organisms of all trophic levels, including the primary producers, such as microalgae. Considering the ecological value of microalgae and the toxicological effects of MPs towards them, this review provides: (1) a detailed understanding of the interactions between MPs and microalgae in the complex natural environment; (2) a discussion about the toxic effects of single type and mixtures of plastic particles on the microalgae cells, and (3) a discussion about the impacts of MPs on various features of microalgae -based bioremediation technology. For this purpose, toxic effects of MPs on various microalgal species were compiled and plastic components of MPs were ranked on the basis of their toxic effects. Based on available data, ranking for various plastic components was found to be: Polystyrene (PS) (rank 1) > Polyvinyl Chloride (PVC) > Polypropylene (PP) > Polyethylene (PE) (rank 4). Furthermore, the review suggested the need to understand joint toxicity of MPs along with co-contaminants on microalgae as the presence of other pollutants along with MPs might affect microalgae differently. In-depth investigations are required to check the impact of MPs on microalgae-based wastewater treatment technology and controlling factors.
Show more [+] Less [-]Microplastics in surface sediments of a highly urbanized wetland
2022
Birami, Farideh Amini | Keshavarzi, Behnam | Moore, Farid | Busquets, Rosa | Zafarani, Seyed Ghasem Ghorbanzadeh | Golshani, Reza | Cheshmvahm, Hamidreza
This study investigates the incidence of MPs in surface sediment samples, collected from the Anzali Wetland, Gillan province, North of Iran. This natural habitat receives municipal wastewater effluents and hosts industries and recreational activities that could release plastic to the wetland. There is need for studies to understand MPs pollution in wetlands. A total of 40 superficial sediment samples were taken covering potential pollution hotspots in the wetland. The average level of MPs was 362 ± 327.6 MP/kg: the highest MPs levels were near the outlet of a highly urbanized river (Pirbazar River) (1380 MP/kg), which runs through Rasht city. This was followed by 1255 MP/kg where there was intense fishing, boating and tourism activities in the vicinity of Bandar-e Anzali city. Fibers were the most common type of MPs (80% of the total MPs detected). The MPs polluting the wetland were predominantly white/transparent (42%), and about 40% of them were >1000 μm. Polypropylene (PP) and polyethylene (PE) prevailed in MPs found. MPs were characterized with polarized light microscopy, Raman spectroscopy, Scanning Electron Microscopy coupled with Energy-Dispersive X-ray spectroscopy. Microplastics levels were found to correlate significantly (p > 0.7) with electrical conductivity (EC) and sand-size fraction of the sediments. Coarse-grained sediments presented large capacity to lodge the MPs. This study can be used to establish protection policies in wetlands and newly highlights the opportunity of intercepting MPs in the Anzali Wetland, which are generally >250 μm, before they fragment further.
Show more [+] Less [-]Is mulch film itself the primary source of meso- and microplastics in the mulching cultivated soil? A preliminary field study with econometric methods
2022
Xu, Li | Xu, Xiangbo | Li, Chang | Li, Jing | Sun, Mingxing | Zhang, Linxiu
There has been an increasing interest in the pollution caused by meso- and microplastics (MMPs) in terrestrial ecosystems. Mulch film was once considered to be the most important source of MMPs in the mulching cultivated soil. However, the academic community has not given sufficient scientific evidence. In this study, stratified random sampling method was used to selectively interview households in Hebei province, China (400 households, 20 villages, 5 counties). Finally, household characteristics and mulch film use behavior of 41 households were collected, and corresponding soil samples were sampled. The results showed that 1) the abundance of MMPs was 29.3 ± 33.1 items·kg⁻¹ (DW) and the particle size of MMPs was 2.95 × 10³±1.75 × 10³ μm, and the proportion of MMPs derived from Polyethylene (PE) was only 18.8%; 2) the mass of MMPs was 2.90 ± 3.72 mg kg⁻¹ (DW) and the proportion of PE MMPs was 43.75%, which has the highest mass percentage; 3) After controlling the endogenous and dummy variables, the use history of mulch film (HistMF) was found to be positively correlated to the abundance of MMPs and inversely correlated to the particle size, but nor with the mass of MMPs; 4) Regarding the heterogeneous characteristics of MMPs, including particle size, color, shape, and type, the findings found the absence of a significant correlation between HistMF and the abundance and mass of PE. In summary, mulch-derived MMPs are not the primary source of MMPs in the mulching cultivated soil in terms of abundance but probably be in terms of mass.
Show more [+] Less [-]Spatial distribution of microplastics in Chinese freshwater ecosystem and impacts on food webs
2022
Over the past two decades, there has been a lot of discussion about the rapid increase of microplastics (MPs) due to their persistence, ubiquity, and toxicity. The widespread distribution of MPs in various freshwater ecosystems makes them available for different trophic levels biota. The ingestion and trophic transfer of MPs may induce potential impacts on freshwater food webs. Therefore, this systematic review is an in-depth review of 51 recent studies to confirm the spatial distribution of MPs in the Chinese freshwater ecosystem including water, sediment and biota, exposure pathways, and impacts on freshwater food webs. The result suggested the white, transparent and colored, Polypropylene (PP) and Polyethylene (PE) of <1 mm fibers were dominant in Chinese freshwaters. The uptake of MPs by various freshwater organisms as well as physiological, biological and chemical impacts on food webs were also elucidated. At last, some limitations were discussed for future studies to better understand the effects of MPs on food webs.
Show more [+] Less [-]Facile nanoplastics formation from macro and microplastics in aqueous media
2022
Peller, Julie R. | Mezyk, Stephen P. | Shidler, Sarah | Castleman, Joe | Kaiser, Scott | Faulkner, Richard F. | Pilgrim, Corey D. | Wilson, Antigone | Martens, Sydney | Horne, Gregory P.
The immense production of plastic polymers combined with their discordancy with nature has led to vast plastic waste contamination across the geosphere, from the oceans to freshwater reservoirs, wetlands, remote snowpacks, sediments, air and multiple other environments. These environmental pollutants include microplastics (MP), typically defined as small and fragmented plastics less than 5 mm in size, and nanoplastics (NP), particles smaller than a micrometer. The formation of micro and nanoplastics in aqueous media to date has been largely attributed to fragmentation of plastics by natural (i.e., abrasion, photolysis, biotic) or industrial processes. We present a novel method to create small microplastics (≲ 5 μm) and nanoplastics in water from a wide variety of plastic materials using a small volume of a solubilizer liquid, such as n-dodecane, in combination with vigorous mixing. When the suspensions or solutions are subjected to ultrasonic mixing, the particle sizes decrease. Small micro- and nanoparticles were made from commercial, real world and waste (aged) polyethylene, polystyrene, polycarbonate and polyethylene terephthalate, in addition to other plastic materials and were analyzed using dark field microscopy, Raman spectroscopy and particle size measurements. The presented method provides a new and simple way to create specific size distributions of micro- and nanoparticles, which will enable expanded research on these plastic particles in water, especially those made from real world and aged plastics. The ease of NP and small MP formation upon initial mixing simulates real world environments, thereby providing further insight into the behavior of plastics in natural settings.
Show more [+] Less [-]Novel methodology for identification and quantification of microplastics in biological samples
2022
Malafaia, Guilherme | da Luz, Thiarlem Marinho | Araújo, Amanda Pereira da Costa | Ahmed, Mohamed Ahmed Ibrahim | Rocha-Santos, Teresa | Barceló, Damià
Currently, the evidence of the ingestion of microplastics (MPs) by organisms or the accumulation in different environmental compartments has been achieved using several methodological procedures. However, its uses have not been standardized across studies. In this study, we aim to assess and validate a protocol that can be useful for optimizing the identification and quantification procedures of polyethylene microplastics (PE MPs) in biological samples. Initially, considering that numerous studies filter samples previously digested in cellulosic membranes for isolation and analysis of MPs, we evaluated whether washing these membranes with different reagents could contribute to the complete detachment of particles, as well as to their dispersion in the obtained solutions. However, none of the tested reagents (dimethyl sulfoxide, acetone, ethyl alcohol and chloroform), including purified water, was able to completely remove the MPs adhered to the membranes or facilitate their dispersion in the solutions. On the other hand, we observed that the digestion of the membranes by acetonitrile constituted a procedure that prevents the loss of particles due to adherence, in addition to promoting good dispersion of MPs. Subsequently, we evaluated the use of Neubauer chambers for the quantification of MPs, having observed a good recovery rate (>92%) and results with insignificant variation, in PE MPs solutions with different concentrations (0.15; 0.075 and 0.0375 mg/mL). Ultimately, the validation of the proposed procedures took place from the evaluation of the accumulation of PE MPs in Astyanax spp. juveniles, having demonstrated the efficiency and sensitivity of the method proposed for this purpose. Subsequently, our study provides a methodological alternative that can optimize MPs quantifications in biological samples and reduce the generation of biased or unreliable results.
Show more [+] Less [-]Informal landfill contributes to the pollution of microplastics in the surrounding environment
2022
Wan, Yong | Chen, Xin | Liu, Qian | Hu, Hongjuan | Wu, Chenxi | Xue, Qiang
A large amount of plastic waste is generated yearly worldwide, and landfills are commonly used for the disposal of plastic waste. However, burying in landfill does not get rid of the plastic waste but leave the problem to the future. Previous works have showed that microplastics are presented in the landfill refuse and leachate, which might be potential sources of microplastics. In this work, characteristics of microplastic pollution in an informal landfill in South China were studied. Landfill refuse, underlying soil, leachate, and groundwater samples were collected from different sites within and around the landfill. Results show that microplastics in the landfill refuse and underlying soil varied from 590 to 103,080 items/kg and from 570 to 14,200 items/kg, respectively. Most of the microplastics are fibrous, small sized, and transparent. Polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET) are major polymer types. Scanning electron microscope (SEM) images and Fourier Transform Infrared (FTIR) spectra of the microplastic samples indicate varying degree of weathering. Microplastic abundances in the landfill leachate and groundwater ranged from 3 to 25 items/L and from 11 to 17 items/L, respectively. Microplastics detected in the landfill leachate and groundwater are even smaller compared with those in the refuse and underlying soil and their polymer types are more diverse. This work demonstrated that microplastics presented in an informal landfill without sufficient protection can leak out to the surrounding environment. The microplastic pollution originated from informal landfills should receive more attentions.
Show more [+] Less [-]Studying the combined influence of microplastics’ intrinsic and extrinsic characteristics on their weathering behavior and heavy metal transport in storm runoff
2022
Herath, Amali | Salehi, Maryam
The weathering and contaminant transport behavior of both primary (PMPs) and secondary microplastics (SMPs) are interrelated to their original physiochemical features and variations within the environment. This study examines the influence of PMPs' intrinsic characteristics (polymer structure and crystallinity) and SMPs' extrinsic features (surface oxidation and external sediments attachment) on the photodegradation kinetics, and subsequently Pb(II) and Zn(II) uptake from stormwater. For this purpose, high density polyethylene (HDPE) and low density polyethylene (LDPE) with different degrees of crystallinities were produced as PMPs, and their photodegradation behaviors were compared with original polymers. Furthermore, the SMPs generated by abrasion and surface oxidation of PMPs and the virgin PMPs underwent accelerated photodegradation, and the changes of their crystallinity, surface chemistry, and morphology were examined. Scanning electron microscopy (SEM) imaging and X-ray photoelectron (XPS) studies revealed the formation of cracks and different oxidized functionalities on MPs surface due to UV photodegradation. The vinyl and carbonyl indices calculated using Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR) spectroscopy demonstrated an elevated photodegradation rate for SMPs compared to the PMPs. Moreover, the Differential Scanning Colorimetry (DSC) demonstrated an increasing percentage of crystallinity in all MPs due to the photodegradation. The percent crystallinity of HDPE pellets increased after photodegradation from 49.8 to 62.6 and it increased from 17.2 to 38.9 for LDPE pellets respectively. The greater level of increase in crystallinity for LDPE in comparison to HDPE upon photodegradation was referred to as LDPE's greater amorphous content and branched structure. A greater level of metal uptake was obtained for photodegraded LDPE pellets as 2526 μg/m² for Pb(II) and 2028 μg/m² for Zn(II) respectively.
Show more [+] Less [-]Ecotoxicological effects of plastics on plants, soil fauna and microorganisms: A meta-analysis
2022
Huo, Yuxin | Dijkstra, Feike A. | Possell, Malcolm | Singh, Balwant
The interactions of plastics and soil organisms are complex and inconsistent observations on the effects of plastics on soil organisms have been made in published studies. In this study, we assessed the effects of plastic exposure on plants, fauna and microbial communities, with a meta-analysis. Using a total of 2936 observations from 140 publications, we analysed how responses in plants, soil fauna and microorganisms depended on the plastic concentration, size, type, species and exposure media. We found that overall plastics caused substantial detrimental effects to plants and fauna, but less so to microbial diversity and richness. Plastic concentration was one of the most important factors explaining variations in plant and faunal responses. Larger plastics (>1 μm) caused unfavourable changes to plant growth, germination and oxidative stress, while nanoplastics (NPs; ≤ 1 μm) only increased oxidative stress. On the contrary, there was a clear trend showing that small plastics adversely affected fauna reproduction, survival and locomotion than large plastics. Plant responses were indifferent to plastic type, with most studies conducted using polyethylene (PE) and polystyrene (PS) plastics, but soil fauna were frequently more sensitive to PS than to PE exposure. Plant species played a vital role in some parameters, with the effects of plastics being considerably greater on vegetable plants than on cereal plants.
Show more [+] Less [-]