When old corrugated cardboard (OCC) is returned to the paper mill for repulping and reuse, the starch, which is added to the paper surface as a reinforcement agent, is dissolved into the pulping wastewater. Most of the OCC pulping wastewater is recycled to save precious water resources; however, during the water recycling process, the accumulation of dissolved starch stimulates microbial reproduction, which causes poor water quality and putrid odor. This problem seriously affects the stability of the papermaking process and product quality. In this study, phosphomolybdic acid (H₃PMo₁₂O₄₀, abbreviated as PMo₁₂) was utilized to catalyze the waste starch present in papermaking wastewater to monosaccharides, realizing the resource utilization of waste starch. The results showed that the optimized yield of total reducing sugar (78.68 wt%) and glycolic acid (12.83 wt%) was achieved at 145 °C with 30 wt% PMo₁₂ at pH 2, which is equivalent to 91.51 wt% starch recovered from wastewater for resource utilization. In addition, the regeneration of the reduced PMo₁₂ was realized by applying a potential of 1 V for 2 h. Overall, this study has theoretical significance and potential application value for resource utilization of waste starch in OCC pulping process and cleaner management of OCC waste paper.

The work shown in this article demonstrate a novel example of converting olive industry solid waste (OISW) into a magnetic cellulose nanocrystalline (MNCs) to serve as selective magnetic sorbents for methylene blue. Olive industry solid waste contains about 40% cellulose. The cellulose was extracted in a powder form from olive industry solid waste by subjecting it to a multistep pulping and bleaching process. The extracted powder cellulose was then converted to nanocrystalline cellulose (NCs) by acid hydrolysis. The NCs were then treated with a solution of FeCl₃.6H₂O, FeSO₄, and H₂O by a colloidal suspension method which produced free-flowing porous MNCs. The produced MNCs are characterized by several spectroscopic and analytical techniques such as SEM, TEM, XRD, FTIR VSM, and TGA. The efficiency of the three polymers cellulose powder, NCs, and MNCs toward extracting methylene blue (MB) from water was evaluated. Cellulose powder and NCs showed acceptable tendency for methylene blue. However, MNCs showed excellent extraction efficiency toward MB. The thermodynamic studies revealed a spontaneous adsorption of MB by MNCs at various temperatures. The spontaneous adsorption could be attributed to the electrostatic interaction and H-bonding between MNCs and MB. However, the interaction between cellulose, NCs, and MB is limited to the H-bonding.

The present study was performed to investigate the performance of activated carbon-supported copper and manganese base catalyst for catalytic wet oxidation (CWO) of pulping effluent. CWO reaction was performed in a high pressure reactor (capacity = 0.7 l) at temperatures ranging from 120 to 190 °C and oxygen partial pressures of 0.5 to 0.9 MPa with the catalyst concentration of 3 g/l for 3 h duration. With Cu/Mn/AC catalyst at 190 °C temperature and 0.9 MPa oxygen partial pressures, the maximum chemical oxygen demand (COD), total organic carbon (TOC), lignin, and color removals of 73, 71, 86, and 85 %, respectively, were achieved compared to only 52, 51, 53, and 54 % removals during the non-catalytic process. Biodegradability (in terms of 5-day biochemical oxygen demand (BOD₅) to COD ratio) of the pulping effluent was improved to 0.38 from an initial value of 0.16 after the catalytic reaction. The adsorbed carbonaceous fraction on the used catalyst was also determined which contributed meager TOC reduction of 3–4 %. The leaching test showed dissolution of the metals (i.e., Cu and Mn) from the catalysts in the wastewater during CWO reaction at 190 °C temperature and 0.9 MPa oxygen partial pressures. In the future, the investigations should focus on the catalyst reusability.

Although a significant amount of brewery wastewater (BW) is generated during beer production, the nutrients in the BW could be reused as a potential bio-resource for biohydrogen production. Therefore, improvements in photofermentative biohydrogen production due to a combination of BW and pulp and paper mill effluent (PPME) as a mixed production medium were investigated comprehensively in this study. The experimental results showed that both the biohydrogen yield and the chemical oxygen demand removal were improved through the combination of BW and PPME. The best biohydrogen yield of 0.69 mol H₂/L medium was obtained using the combination of 10 % BW + 90 % PPME (10B90P), while the reuse of the wastewater alone (100 % BW and 100 % PPME) resulted in 42.3 and 44.0 % less biohydrogen yields than the highest yield, respectively. The greatest light efficiency was 1.97 % and was also achieved using the combination of both wastewaters at 10B90P. This study revealed the potential of reusing and combining two different effluents together, in which the combination of BW and PPME improved the nutrients and light penetration into the mixed production medium.

The anchoveta (Engraulis ringens) and sardine (Strangomera bentincki) are coastal pelagic species with important spawning areas off the coast of Chile. The discharge of secondary-treated effluents from a kraft pulp plant near one of these spawning areas has raised environmental concerns. Therefore, effluent effects on the development of anchoveta and sardine eggs were assessed by in vitro exposure. Eggs were sampled between 2007 and 2010 off Talcahuano, Chile. Subsequent toxicity tests (96 h duration, 12 °C) were performed using increasing effluent concentrations, a filtered seawater control, and two potassium dichromate concentrations (to verify consistent embryonic sensitivity). Egg mortality and hatching success were evaluated. For anchoveta, mortality (9.9 ± 7.1%) did not significantly differ among groups in five toxicity tests except the final toxicity test that showed significant differences in mortality (5.6% control vs 27.8% in 100% effluent). For sardines, no differences in mortality existed between the effluent dilutions (2.6 ± 3.6%) and control (6.3 ± 3.9%). Notably, anchoveta egg survival and hatching success rates were inconsistent, i.e., the highest rates of hatching failure occurred on the same sampling date with the highest rates of survival for the 100% effluent group (72%). In conclusion, the obtained results indicate that (i) anchoveta egg mortality and hatching failure increase only under 100% effluent exposure, coinciding with decreased egg quality near the end of spawning season and (ii) high effluent dilutions not significantly increase sardine and anchoveta egg mortalities. Nevertheless, the recorded adverse effects to the hatching process should be studied in greater detail, particularly considering interspecific variability and the complexity of reproductive processes, especially during early development.