INTRODUCTION: In order to identify a potential surrogate of planktonic ciliate communities for marine bioassessments and evaluating biological conservations, the different taxonomic/numerical resolutions and taxa as surrogates were studied in Jiaozhou Bay, northern China during a 1-year cycle (June 2007–May 2008). MATERIALS AND METHODS: Samples were collected biweekly from a depth of 1 m at each of five sites. A range of physicochemical parameters were also measured in order to determine water quality. RESULTS: The genus- and family-level resolutions maintained sufficient information to evaluate the ecological patterns of the ciliate communities in response to environmental status. The non-loricate oligotrichous ciliate assemblages in both abundance and occurrence may be used as a surrogate of planktonic ciliate communities. Heavy data transformations were an optimal strategy for the species level of planktonic ciliates, while mild data transformations were for the higher. The ordination patterns based on species biomass, occurrence, and biomass/abundance ratio matrices were significantly consistent with that of species abundance data. CONCLUSION: The results suggest that the use of simplifications at both taxonomic and numerical resolutions are time-efficient and would allow improving sampling strategies of large spatial/temporal scale monitoring programs and biological conservation researches in the marine ecosystem with a relative paucity of scientists.

PURPOSE: Real electroplating effluents contain multiple metals. An important point related with the feasibility of the bioremediation process is linked with the strategy to recover selectively metals. In this work, a multimetal solution, obtained after microwave acid digestion of the ashes resulted from the incineration of Saccharomyces cerevisiae contaminated biomass, was used to recover selectively chromium, copper, nickel, and zinc. RESULTS: The acid solution contained 3.8, 0.4, 2.8, and 0.2 g/L of chromium(III), copper, nickel, and zinc, respectively. The strategy developed consisted of recovering copper (97.6%), as a metal, by electrolyzing the solution at a controlled potential. Then, the simultaneous alkalinization of the solution (pH 14), addition of H2O2, and heating of the solution led to a complete oxidation of chromium and nickel recovery (87.9% as a precipitate of nickel hydroxide). After adjusting the pH of the remaining solution at pH 10, selective recovery of zinc (82.7% as zinc hydroxide) and chromium (95.4% as a solution of cromate) was achieved. CONCLUSION: The approach, used in the present work, allowed a selective and efficient recovery of chromium, copper, nickel, and zinc from an acid solution using a combined electrochemical and chemical process. The strategy proposed can be used for the selective recovery of metals present in an acid digestion solution, which resulted from the incineration of ashes of biomass used in the treatment of heavy metals rich industrial effluents.

INTRODUCTION: The influence of sintering temperature on the physico-mechanical characteristics (such as water absorption, apparent porosity, bulk density, weight loss on ignition, firing shrinkage, and compressive strength), leachability, and microstructure of shale brick containing oil well-derived drilling waste (DW) was investigated. METHODS: The experiments were conducted at a temperature ranging from 950°C to 1,050°C with 30% DW addition. RESULTS: The results indicate that increasing the sintering temperature decreases the water absorption and apparent porosity and increases the shrinkage, density, and compressive strength of sintered specimens. Moreover, the physico-mechanical properties of samples sintered at 1,050°C meet the requirements of the MU20 according to GB/T 5101-2003 (in China). The heavy metal concentrations of the leachate are much lower than the current regulatory limits according to GB16889-2008. CONCLUSION: The results from XRD and SEM show that increasing sintering temperature results in an increase of the high temperature liquid phase, which may have a significant effect on the densification process of the samples.

INTRODUCTION: To use biomarkers in monitoring programmes, potential confounding factors must be considered. In the clam Scrobicularia plana, the influence of size and salinity on biomarkers at different levels of biological organisation has been examined. MATERIAL AND METHODS: Biochemical (glutathione-S-transferase, lactate dehydrogenase, acetylcholinesterase, digestive enzymes, metallothionein), physiological (energy reserves) and behavioural (burrowing) responses were compared (a) in specimens of different sizes from the Loire estuary; (b) in specimens from the Belon estuary at two sites with salinities of 30.1 or 11.5. RESULTS: Amongst the biomarkers able to reveal pollution effects, several are influenced by the size of the clams (Ag, Cu, Ni and glycogen concentrations, GST and AChE activities, condition indices). Salinity differences induced variations of the same order of magnitude (GST, AChE) or even higher (lactate dehydrogenase, digestive enzymes in the crystalline style) than contamination-induced variations. In burrowing tests, the number of burrowed specimens was similar at both salinities after an experiment time <3 h. CONCLUSIONS: Size is a factor necessarily but easily controlled. Because the weight may be different in clams of identical size, correction factors may be used to minimise the influence of weight changes on biomarkers. A correction factor taking into account salinity levels can also be used. The protein concentrations in the clams did not differ with salinity, a very favourable outcome since all enzyme activities are classically expressed by reference to total protein concentrations. For burrowing tests, the number of burrowed specimens at a particular time is an endpoint that is preferable to measures of burrowing speed.

INTRODUCTION: Complex organic compounds found in oil and sediments linked with a particular source (such as algae, bacteria or vascular plants) are defined as biomarkers and are useful dating indicators in organic geochemistry. METHODS AND RESULTS: This paper presents the composition of the organic matter (OM) on marine surface sediments from a degraded Tunisian coast analysed by pyrolysis and gas chromatography–mass spectrometry (GC-MS). High total OM contents (0.3–4.2%) were detected with high levels of saturated linear hydrocarbons. The aliphatic lipids had contributed with up to 11.7% of the total OM, and their distribution had consisted of resolved compounds (n-alkanes and fatty acid (FAs)) and an unresolved complex mixture. Hydrocarbons, primarily n-alkanes, were ranged from 368 to 3,886 μg g−1. The FAs (674–2,568 μg g−1) were dominated by derived primary production, and the short chain FAs (C16 and C18) were the most abundant throughout. The ubiquitous presence of petroleum contamination, mainly from offshore oil exploration, discharge of pollutants from rivers, shipping activities and atmospheric deposition was found in all samples. The Gabès littoral seems to be quite to very polluted near the industrial zone of Ghannouch. The C/H ratio (generally around 5.9), the thermal analysis and GC-MS of n-alkanes and FAs showed that the OM in the studied area was composed of anthropogenic/petrogenic, marine and continental sources. CONCLUSIONS: Our study represents an innovative approach to assessing environmental pollution. The evaluation of organic matter by examination of sterols, alkanes and fatty acids allows the identification of source, both anthropogenic and natural.

INTRODUCTION: Cadmium (Cd) in plants interrupts numerous metabolic processes and reduces the water and nutrient uptake that cause chlorosis, growth retardation, and ultimately plant death. Response of Brassica napus L. to calcium (Ca) enrichment in growth medium for reducing Cd toxicity stress by strengthening the photosynthesis organelles and their functionality was explored in this study. MATERIALS AND METHODS: B. napus seedlings of two cultivars (ZS 758 and ZS 72) were exposed to Cd toxicity at 500 μM in hydroponics, and it was ameliorated with Ca at 2.0 mM. The study included determinations and evaluations pertaining to physiological attributes of plant growth, chlorophyll, and photosynthesis. RESULTS AND DISCUSSION: Cadmium stress significantly depressed the seedling growth and reduced photosynthetic rate (Pn), stomatal conductivity (Gs), and transpiration rate (Tr). Further, Cd toxicity markedly decreased the electron transport rate of PSII, effective quantum yield of photochemical energy conversion in PSII [Y(II)], photosynthetic active radiation, coefficient of photochemical quenching (qP), and chlorophyll fluorescence decrease ratio (RFd). Addition of Ca in Cd-stressed plants antagonized the toxicity effects on all the above-mentioned attributes. Calcium amendment also reversed the Cd stress-induced increase in intercellular CO2 concentration (Ci) and non-photochemical quenching, and countered the Cd accumulation in seedlings. CONCLUSION: This study suggests that Ca2+ in the proximity of plasma membrane is proficient in alleviating Cd toxicity by reducing the cell-surface negativity and competing for Cd2+ ion influx. Consequently, both the plant growth and activity of diurnal photosynthetic system remain the least altered under Cd-provoked toxicity stress.

PURPOSE: The objective of this paper is to assess the impact of long-term electroplating industrial activities on heavy metal contamination in agricultural soils and potential health risks for local residents. METHODS: Water, soil, and rice samples were collected from sites upstream (control) and downstream of the electroplating wastewater outlet. The concentrations of heavy metals were determined by an atomic absorption spectrophotometer. Fractionation and risk assessment code (RAC) were used to evaluate the environmental risks of heavy metals in soils. The health risk index (HRI) and hazard index (HI) were calculated to assess potential health risks to local populations through rice consumption. RESULTS: Hazardous levels of Cu, Cr, and Ni were observed in water and paddy soils at sites near the plant. According to the RAC analysis, the soils showed a high risk for Ni and a medium risk for Cu and Cr at certain sites. The rice samples were primarily contaminated with Ni, followed by Cr and Cu. HRI values >1 were not found for any heavy metal. However, HI values for adults and children were 2.075 and 1.808, respectively. CONCLUSION: Water, paddy soil, and rice from the studied area have been contaminated by Cu, Cr, and Ni. The contamination of these elements is related to the electroplating wastewater. Although no single metal poses health risks for local residents through rice consumption, the combination of several metals may threaten the health of local residents. Cu and Ni are the key components contributing to the potential health risks.

PURPOSE: Pharmaceuticals are an integral part of a dignified life. However, a lack of degradability and threats to the welfare of living beings cause concern due to their emission into the environment. There is also a lack of knowledge about cause and consequence. Therefore, we intend to contribute to the development of educational programmes which should increasingly include the topic ‘pharmaceuticals in the environment’. METHODS: Considering the current literature, we developed a corresponding series of worksheets (Online Resource) and sample solutions on an introductory level and integrated them into our curriculum. RESULTS: The material compiled for the worksheets was arranged in a logical order and considers several subtopics. The worksheets aim to support the examination of related aspects such as environmental effects, emissions, wastewater treatment plants, degradation, degradation by-products, advanced oxidation processes, hydraulic retention times, half-life times, biosolids, exposition pathways, precautionary principle, classification schemes for pharmaceuticals and, related to the structure–activity relationship, the design for degradability. The students managed to work on the tasks in an appropriate manner and received a good overview of the occurrence and fate of pharmaceuticals in the environment. CONCLUSIONS: Tasks that were presented to students regarding the topic ‘pharmaceuticals in the environment’ contributed to a better understanding of the possible risks of medical care on an introductory level. The tasks have been incorporated into a logic series of worksheets (Online Resource) with sample solutions available. Alternatively, the material would be appropriate for the preparation of a corresponding lecture on this topic.

BACKGROUND, AIM, AND SCOPE: Textile industry produces wastewater which contributes to water pollution since it utilizes a lot of chemicals. Preliminary studies show that the wastewater from textile industries contains grease, wax, surfactant, and dyes. The objective of this study was to determine the treatment efficiency of the nickel catalysts supported on hydrotalcites in three-dye model compounds and two types of wastewater. MATERIALS AND METHODS: Hydrotalcites were employed to prepare supported nickel catalysts by wetness impregnation technique. Metal loadings from 1 to 10 wt% were tested. Catalysts were characterized by several techniques. They were tested in a catalytic wet air oxidation of three dyes and two wastewaters with different origins. RESULTS AND DISCUSSION: It could be observed that the higher the metal content, the lower the BET area, possibly due to sintering of Ni and the consequent blocking of the pores by the metal. In addition, metallic dispersion was also higher when the metal content was lower. Dye conversion was more than 95% for every catalyst showing no differences with the nickel content. A high degree of dye conversion was achieved. Wet air oxidation (WAO) and catalytic wet air oxidation (CWAO) processes have been proved to be extremely efficient in TOC removal for wastewaters. CONCLUSIONS: The CWAO process can be used to remove dyes from wastewater. Three different dyes were tested showing satisfactory results in all of them. TOC degradation and dye removal in the presence of the catalyst were effective. Also, the HTNi catalyst is very active for organic matter and toxicity removal in wastewaters.

BACKGROUND, AIM, AND SCOPE: The present study is an attempt to examine some of the probable causes of the unusually low tropospheric column ozone observed over eastern India during the exceptional drought event in July 2002. METHOD: We examined horizontal wind and omega (vertical velocity) anomalies over the Indian region to understand the large-scale dynamical processes which prevailed in July 2002. We also examined anomalies in tropospheric carbon monoxide (CO), an important ozone precursor, and observed low CO mixing ratio in the free troposphere in 2002 over eastern India. RESULTS AND DISCUSSION: It was found that instead of a normal large-scale ascent, the air was descending in the middle and lower troposphere over a vast part of India. This configuration was apparently responsible for the less convective upwelling of precursors and likely caused less photochemical ozone formation in the free troposphere over eastern India in July 2002. CONCLUSION: The insight gained from this case study will hopefully provide a better understanding of the process controlling the distribution of the tropospheric ozone over the Indian region.