Microbial selenite reduction has increasingly attracted attention from the scientific community because it allows the separation of toxic Se from waste sources with the concurrent recovery of Se nanoparticles, a multifunctional material in nanotechnology industries. In this study, four selenite-reducing bacteria, isolated from a river water sample, were found to reduce selenite by > 85% within 3 d of incubation, at ambient temperature. Among them, strain NDSe-7, belonging to genus Lysinibacillus, can reduce selenite and produce Se nanospheres in alkaline conditions, up to pH 10.0, and in salinity of up to 7.0%. This strain can reduce 80 mg/L of selenite to elemental Se within 24 h at pH 6.0–8.0, at a temperature of 30–40 °C, and salinity of 0.1–3.5%. Strain NDSe-7 exhibited potential for use in Se removal and recovery from industrial saline wastewater with high alkalinity. This study indicates that extremophilic microorganisms for environmental remediation can be found in a conventional environment.

Nitrogen (N) pollution and the resulting eutrophication can have deleterious consequences on estuaries, such as hypoxia, fish kills, and loss of biotic diversity. An understanding of N sources and cycling in estuaries is fundamental to determining how to effectively manage these ecologically and commercially important areas. We applied a multiple-isotopic approach to examine the transformations and sources of the N pools in the Pearl River Estuary (PRE) during winter. The surface water in the West PRE was characterized by low salinity and high NO₃⁻, while that in the east had high salinity and low NO₃⁻. The NO₃⁻ in the West PRE was largely regulated by a conservative mixing process. In contrast, assimilation and nitrification dominated in the East PRE, which was attributed to the long water-residence time. For the first time, the source contributions of NO₃⁻ and NH₄⁺ were estimated by isotope mixing models. Our results suggest that river discharge and nitrification contributed 81% and 12% to the NO₃⁻ pool, respectively. A major portion (68%) of the NH₄⁺ was from river discharge, with the remainder likely from sewage and the aquitard-aquifer system. Our study demonstrates that internal nitrification can potentially be of pivotal importance in determining the NO₃⁻ level in an estuary and its export to coastal waters.

Freshwater salinization is a rapidly emerging ecological issue and is correlated with significant declines in aquatic biodiversity. It remains unclear how changing salinity regimes affect the physiology of sensitive aquatic insects. We used the parthenogenetic mayfly, Neocloeon triangulifer, to ask how ionic exposure history alters physiological processes and responses to subsequent major ion exposures. Using radiotracers (²²Na, ³⁵SO₄, and ⁴⁵Ca), we observed that mayflies chronically reared in elevated sodium or sulfate (157 mg L⁻¹ Na or 667 mg L⁻¹ SO₄) had 2-fold (p < 0.0001) and 8-fold (p < 0.0001) lower ion uptake rates than mayflies reared in dilute control water (16 mg L⁻¹ Na and 23 mg L⁻¹ SO₄) and subsequently transferred to elevated salinities, respectively. These acclimatory ion transport changes provided protection in 96-h toxicity bioassays for sodium, but not sulfate. Interestingly, calcium uptake was uniformly much lower and minimally influenced by exposure history, but was poorly tolerated in the toxicity bioassays. With qRT-PCR, we observed that the expression of many ion transporter genes in mayflies was influenced by elevated salinity in an ion-specific manner (general upregulation in response to sulfate, downregulation in response to calcium). Elevated sodium exposure had minimal influence on the same genes. Finally, we provide novel light microscopic evidence of histomorphological changes within the epithelium of the Malpighian tubules (insect primary excretory system) that undergoes cellular degeneration and necrosis secondary to calcium toxicity. We conclude that physiological plasticity to salinity stress is ion-specific and provide evidence for ion-specific toxicity mechanisms in N. triangulifer.

Copper-containing antifouling paints (AFP) are widely used for leisure boat maintenance. Cu emitted from AFP into German surface water bodies has been suggested to be a significant source of heavy metal pollution, threatening water quality. We developed two scenarios to model Cu emissions from AFP applied on leisure boats on national scale, which allow identifying regional hotspots. The top-down approach (scenario A) was based on a previous study on national AFP consumption, while in the bottom-up approach (scenario B), median and interquartile range of Cu release rates depending on salinity conditions were considered for emission estimation. Both scenarios clearly highlighted the locally high emission pressure on inland waters in popular watersport regions, identifying these as requiring intense protection. Scenario B generally predicted lower Cu emissions (sea: 11.05–25.53 t a⁻¹, inland: 14.15–34.59 t a⁻¹) than scenario A (sea: 22.53 t a⁻¹, inland: 47.97 t a⁻¹). To evaluate their relevance, scenario results were compared to emissions modelled with MoRE (Modelling of Regionalized Emissions), which is used as reporting tool on substance emissions by Germany. According to scenarios A and B, the emission from AFP accounted for 13 % and 4–9 % of the total Cu emissions into inland waters in 2016, respectively. Scenario results were similar or higher than other emission pathways such as industrial direct dischargers. Thus, we consider Cu emissions from AFP as a significant pathway to be included in the MoRE emission inventory. We recommend scenario B for implementation as it allows a more flexible adaptation for future modelling.

River ecosystems are under increasing stress in the background of global change and ever-growing anthropogenic impacts in Central Asia. However, available water quality data in this region are insufficient for a reliable assessment of the current status, which come as no surprise that the limited knowledge of regulating processes for further prediction of solute variations hinders the development of sustainable management strategies. Here, we analyzed a dataset of various water quality variables from two sampling campaigns in 2019 in the catchments of two major rivers in Central Asia—the Amu Darya and Syr Darya Rivers. Our results suggested high spatial heterogeneity of salinity and major ion components along the longitudinal directions in both river catchments, pointing to an increasing influence of human activities toward downstream areas. We linked the modeling outputs from the global nutrient model (IMAGE-GNM) to riverine nutrients to elucidate the effect of different natural and anthropogenic sources in dictating the longitudinal variations of the riverine nutrient concentrations (N and P). Diffuse nutrient loadings dominated the export flux into the rivers, whereas leaching and surface runoff constituted the major fractions for N and P, respectively. Discharge of agricultural irrigation water into the rivers was the major cause of the increases in nutrients and salinity. Given that the conditions in Central Asia are highly susceptible to climate change, our findings call for more efforts to establish holistic management of water quality.

Pesticides are widely used to alleviate pest pressure in agricultural systems, and atrazine is a typical diffuse pollutant and serves a sensitivity index for environmental characteristics. Based on the physicochemical properties of parent substances, degradation products of pesticides may pose a greater threat to aquatic ecosystems than pesticides. Atrazine and three primary degradation products (deethylatrazine (DEA), deisopropylatrazine (DIA) and didealkylatrazine (DDA)) were investigated in a semienclosed bay of the western Pacific Ocean. Seasonal surface water and suspended particulate sediment (SPS) samples were collected from the estuary and bay in January, April, and August 2019. The level of pesticide contamination was lower in the bay than in the estuary, and the pesticide concentration in the dissolved phase was higher than that in the adsorbed phase. The average concentrations of atrazine and the three degradation products in the three seasons ranged from 2.42 to 328.46 ng/L in water and from 0.07 to 12.75 ng/L in SPS. The proportion of atrazine among the four detected pollutants decreased from 0.7 to 0.1 in surface water and from 0.3 to 0.1 in SPS over the seasons. As the main degradation products, the concentration proportions of DDA and DEA reached as high as 0.6 in August. The ratio of DEA to atrazine (DEA/ATR) increased from January to August, which indicated the progressive degradation process in the bay. Single-factor analysis of variance and principal component analysis indicated that atrazine degradation was sensitive to temperature, dissolved oxygen, and salinity. These three factors accounted for almost 70% of the seasonal variance in atrazine without a quantification assessment of photolysis or bacteria. The spatial distributions of DEA in the three seasons demonstrated that wind and currents also played important roles in pollutant redistribution. The seasonal temporal and spatial correlations between water and SPS demonstrated the degradation patterns of atrazine in marine conditions, supporting the need for future detailed toxicity studies.

Microplastics have attracted much attention in recent years because they are able to interact with other pollutants including pesticides, with implications for the potential risks to biota. However, the sorption behavior of pesticides on microplastics, especially on biodegradable microplastics which are promising alternatives to conventional polymers, has been insufficiently studied. In this study, triadimefon and difenoconazole were selected as model triazole fungicides, and their sorption behavior on a typical biodegradable microplastics (PBS: polybutylene succinate) and two conventional polyethylene (PE) and polyvinyl chloride (PVC) microplastics was investigated with batch experiments in an aqueous solution. PBS presented the highest sorption capacity for triadimefon (104.2 ± 4.8 μg g⁻¹) and difenoconazole (192.8 ± 2.3 μg g⁻¹), which was 1.8- and 1.3-fold that on PE and 4.4- and 7.4-fold that of PVC, respectively. The results of sorption kinetic and isotherm modeling were better fit by a pseudo-second order model and linear model, respectively. More importantly, the effects of environmental factors (pH, salinity and dissolved organic matter) on the sorption behavior were investigated. Fungicide sorption on PBS was generally not affected by salinity, pH or dissolved organic matter. However, in contrast, salinity and dissolved organic matter both significantly decreased sorption on PE and PVC. The results showed that not only the sorption capacities of biodegradable microplastics but also their responses to environmental factors are quite different from those of conventional microplastics. This finding highlights the importance of the role played by biodegradable microplastics in the accumulation and transportation of organic pollutants.

Effects of contamination on aquatic organisms have been investigated and employed as biomarkers in environmental quality assessment for years. A commonly referenced aquatic organism, mollusks represent a group of major interest in toxicological studies. Both gastropods and bivalves have external mineral shells that protects their soft tissue from predation and desiccation. These structures are composed of an organic matrix and an inorganic matrix, both of which are affected by environmental changes, including exposure to hazardous chemicals. This literature review evaluates studies that propose mollusk shell alterations as biomarkers of aquatic system quality. The studies included herein show that changes to natural variables such as salinity, temperature, food availability, hydrodynamics, desiccation, predatory pressure, and substrate type may influence the form, structure, and composition of mollusk shells. However, in the spatial and temporal studies performed in coastal waters around the world, shells of organisms sampled from multi-impacted areas were found to differ in the form and composition of both organic and inorganic matrices relative to shells from less contaminated areas. Though these findings are useful, the toxicological studies were often performed in the field and were not able to attribute shell alterations to a specific molecule. It is known that the organic matrix of shells regulates the biomineralization process; proteomic analyses of shells may therefore elucidate how different contaminants affect shell biomineralization. Further research using approaches that allow a clearer distinction between shell alterations caused by natural variations and those caused by anthropogenic influence, as well as studies to identify which molecule is responsible for such alterations or to determine the ecological implications of shell alterations, are needed before any responses can be applied universally.

Sea level rise induced-salinization is lowering coastal soils productivity. In order to assess the effects that increased salinity may provoke in terrestrial plants, using as model species: Trifolium pratense, Lolium perenne, Festuca arundinacea and Vicia sativa, two specific objectives were targeted: i) to determine the sensitivity of the selected plant species to increased salinity (induced by seawater-SW or by NaCl, proposed as a surrogate of SW) and, ii) to assess the influence of salinization in total biomass under different agricultural practices (mono- or polycultures).The four plant species exhibited a higher sensitivity to NaCl than to SW. Festuca arundinacea was the most tolerant species to NaCl (EC₅₀,ₛₑₑd gₑᵣₘᵢₙₐₜᵢₒₙ and EC₅₀,gᵣₒwₜₕ of 18.6 and 10.5 mScm⁻¹, respectively). The other three species presented effective conductivities in the same order of magnitude and, in general, with 95% confidence limits overlapping. Soil moistened with SW caused no significant adverse effects on seed germination and growth of L. perenne. Similar to NaCl, the other three species, in general, presented a similar sensitivity to SW exposure with EC₅₀,ₛₑₑd gₑᵣₘᵢₙₐₜᵢₒₙ and EC₅₀,gᵣₒwₜₕ within the same order of magnitude and with confidence limits overlapping.The agricultural practice (mono-vs polyculture) showed some influence on the biomass of each plant species. When considering total productivity, for aerial and root biomass, it was higher in control comparatively to salinization conditions. Under salinization stress, the practice of polyculture was associated with a higher aerial and root total biomass than monocultures (for instance with combinations with T. pratense and F. arundinacea).Results suggest that the effects of salinity stress on total productivity may be minimized under agricultural practices of polyculture. Thus, this type of cultures should be encouraged in low-lying coastal ecosystems that are predicted to suffer from salinization caused by seawater intrusions.

Microplastics have attracted much attention in recent years as they can interact with pollutants in water environment. However, nanoplastics (NPs) with or without the surface functionalization modification have not been thoroughly explored. Here, the sorption behaviors of two fluoroquinolones (FQs), including norfloxacin (NOR) and levofloxacin (LEV) on polystyrene NPs (nano-PS) and carboxyl-functionalized polystyrene NPs (nano-PS-COOH) were investigated. The results showed that sorption isotherms were nonlinear and well fitted by Langmuir model. The sorption capacities of NOR and LEV on nano-PS-COOH were higher than those on nano-PS, and their physical interactions, including polar interaction, electrostatic interaction and hydrogen bonding may be the dominant mechanisms. Moreover, the increase of pH firstly increased the sorption of two FQs on NPs and then decreased because NOR and LEV had a reverse charge at different pH values. Salinity and dissolved organic matter both inhibited the sorption process. These findings show that NPs with or without the surface functionalization modification have different sorption behaviors for environmental pollutants, which deserve our further concern.