Effects of commercial sand mining on aquatic diversity are of increasing global concern, especially in parts of some developing countries. However, understanding of this activity on the diversity of macroinvertebrates remains focused on the α component of species diversity, rather than community functioning. Thus, there remains much uncertainty regarding how each component of taxonomic (TD) and functional (FD) diversity respond to the activity both in freshwater and marine environments. Here, we assessed the effect of sand dredging on α, β and γ components of TD and FD during different dredging periods based on the response of macroinvertebrate communities over 4 years in the second largest freshwater lake in China. After three years of active dredging, substantial reductions in each component (α, β and γ) of TD and FD were observed within the dredged area. Moreover, after one year of natural recovery, a distinct restoration was observed with an obvious return in multiple facets of TD and FD indices. No such changes were observed within the adjacent and reference areas. Decreases in the multiple components of TD and FD within the dredged area were most likely associated with the direct extraction of substrate and associated benthic fauna and indirect variations of the water and sediment environment (e.g., increases in water depth and decreases in %Clay). Furthermore, dispersal processes and mass effects mainly contributed to the maintenance of TD and FD during the dredged and recovery stages. In addition, the fast recovery of TD and FD was also related to the simple taxonomic structure and highly connected nature of the study area. Our results suggest that a more precise experimental design (BACI) should be pursued to avoid potentially confounding effects (e.g., natural disturbance) because the sensitivity of diversity indices depends upon different experimental designs. Moreover, measurement of the impacts of sand dredging on macroinvertebrate diversity can be undertaken within a rigorous framework for better understanding the patterns and processes of each component of TD and FD under the sand dredging disturbance.

The feasibility and effectiveness of iron turning waste as low cost and sustainable permeable reactive barrier (PRB) media for remediating dieldrin, endrin, dichlorodiphenyltrichloroethane (DDT), and lindane individually (batch system) and combined (continuous flow column) in water were investigated. After 10 min of reaction in a batch system, removal of endrin, dieldrin, and DDT was higher (86–91 %) than lindane (41 %) using 1 g of iron turning waste in 200 mL of pesticide solution (20 μg/L for each pesticide). Among the studied pesticides, only lindane removal decreased substantially in the presence of nitrate (37 %) and magnesium (18 %). Acidic water environment (pH = 4) favored the pesticide removal than neutral and basic environments. For the column experiments, sand alone as PRB media was ineffective for remediating the pesticides in water. When only iron turning was used, the removal efficiencies of lindane, endrin, and dieldrin were 83–88 % and remained stable during 60 min of the experiments. DDT removal was less than other pesticides (58 %). Sandwiching the iron turning waste media between two sand layers improved DDT removal (79 %) as well as limited the iron content below a permissible level in product water. In a long-term PRB column performance evaluation, iron turning waste (150 g) removed all pesticides in water (initial concentration of each pesticide = 2 μg/L) effectively (≥94 %) at a hydraulic retention time of 1.6 h. Iron turning waste, which was mainly in the form of zerovalent iron (Fe⁰), was oxidized to ferrous (Fe²⁺) and ferric (Fe³⁺) iron during its reaction with pesticides, and electrons donated by Fe⁰ and Fe²⁺ were responsible for complete dechlorination of all the pesticides. Therefore, it can be used as inexpensive and sustainable PRB media for groundwater remediation especially in developing countries where groundwater contamination with pesticides is more prevalent.

The unified bioaccessibility method (UBM) was harnessed to assess in vitro oral bioaccessibility pools of dialkyl phthalate congeners (with methyl, –ethyl, –butylbenzyl, –n-butyl, –2-ethylhexyl, and –n-octyl moieties) and bisphenol A at the 17 μg g⁻¹ level in beach sand contaminated with polyethylene microplastics. A variety of sample preparation approaches prior to the analysis of the UBM gastrointestinal extracts, including traditional methods (protein precipitation, liquid-liquid extraction, and solid-phase extraction) and dispersive liquid-liquid microextraction (DLLME) were comprehensively evaluated for clean-up and analyte enrichment. DLLME was chosen among all tested approaches on account of the high extraction efficiency (73–95%, excluding bis(2-ethylhexyl)phthalate and di-n-octyl phthalate), high sample throughput (∼7 min per set of samples), and environmental friendliness as demonstrated by the analytical eco-scale score of 83, and the green analytical procedure index pictogram with green/yellow labeling. The release of the less hydrophobic plastic-laden compounds (dimethyl phthalate, diethyl phthalate and bisphenol A) from the contaminated sample into the body fluids was significant, with bioaccessibility values ranging from 30 to 70%, and from 43 to 74% in gastric and gastrointestinal fluids, respectively, and with relative standard deviation < 17% in all cases. The majority of the compounds were leached during gastric digestion, likely as the combined action of the low pH and the gastric enzymes. The risk exposure analysis revealed that accumulation/concentration in the body fluids is potentially relevant for dimethyl phthalate, diethyl phthalate and bisphenol A, with relative accumulation ratios ranging from 1.1 ± 0.1 to 2.6 ± 0.4. The average daily intake values for the suite of compounds, corrected with the bioaccessibility fraction, ranged from 60 to 430 ng kg of body weight⁻¹·day⁻¹, in all cases, far below the tolerable daily intakes, thus indicating the lack of children health risk by ingestion of microplastic-laden sand with elevated concentrations of plasticizers.

Capping represents an efficient and well-established practice to contain polycyclic aromatic hydrocarbons (PAHs) in sediments, reduce mobility, and minimize risks. Exposure to PAHs can encourage biodegradation, which can improve the performance of capping. This study investigates biodegradation of naphthalene (a model PAH) in highly reducing, sediment-like environments with amendment of different capping materials (PAC and sand). Microcosms were prepared with sediment enrichments, sulfate as an electron acceptor, and naphthalene. Results show that PAC stimulates naphthalene biodegradation and mineralization, as indicated by production of ¹⁴CO₂ from radiolabeled naphthalene. Mineralization in PAC systems correlates with the enrichment of genera (Geobacter and Desulfovirga) previously identified to biodegrade naphthalene (Spearman’s, p < 0.05). Naphthalene decay in sand and media-free systems was not linked to biodegradation activity (ANOVA, p > 0.05), and microbial communities were correlated to biomass yields rather than metabolites. Naphthalene decay in PAC systems consists of three stages with respect to time: latent (0–88 days), exponential decay (88–210 days), and inactive (210–480 days). This study shows that PAC amendment enhances naphthalene biodegradation under strictly sulfate-reducing conditions and provides a kinetic and metagenomic characterization of systems demonstrating naphthalene decay.

Environmental degradation of rivers in agricultural landscapes is typically caused by multiple co-occurring stressors, but how interactions among stressors affect freshwater ecosystems is poorly understood. Therefore, we investigated the sensitivity and specificity of several measures of benthic macroinvertebrate community response to the individual and combined effects of the pesticide sulfoxaflor (SFX), increased sand sedimentation and elevated nutrients using outdoor recirculating mesocosms. Among the single stressor treatments, nutrients had no observable impact and sand only affected one community response measure compared to controls. High SFX levels had the largest effects on benthic macroinvertebrate communities, negatively affecting six of seven macroinvertebrate response measures. Sulfoxaflor had similar adverse effects on biota when in combination with sand and nutrients in the multi-stressor treatment, suggesting that generally SFX has overwhelming and pervasive effects irrespective of the presence of the other stressors. In contrast to SFX, elevated nutrients had no detectable effect on macroinvertebrate communities, likely as a consequence of nutrients being rapidly taken up by bacteria rather than by benthic algae. Elevated sand sedimentation increased the negative effects of SFX on sediment sensitive taxa, but generally had limited biological effects. This was despite the levels of sedimentation in our treatments being at concentrations that have caused large impacts in other studies. This research points to direct and rapid toxic effects of SFX on stream macroinvertebrates, contrasting with effects of the other stressors. This study emphasises that pesticide effects could be misattributed to other common freshwater stressors, potentially focussing restoration actions on a stressor of lesser importance.

This study reports seasonal variations of meteorological parameters, atmospheric dust and dust-borne heavy metals concentrations measured, over a period of two years, next to two major airports (Dubai International Airport and Abu Dhabi International Airport) in the Gulf Cooperation Council (GCC) region. On-line monitoring stations were installed at each location next to dust samplers used to frequently collect PM2.5 and PM10 on Teflon filters for metal analysis. Clear seasonal variation in meteorological parameters were identified. The particulate matter concentrations depicted from the two locations were continuously monitored. The PM2.5 concentration ranged from 50 to 100 μg/m³ on normal days but reached 350–400 μg/m³ per day during mild storms. The PM10 levels ranged between 100 and 250 μg/m³ during normal days and spiked to 750 μg/m³ during mild storms. Energy Dispersive X-Ray Analysis (EDS) revealed the presence of significant amounts of alkali and alkaline earth metals, which pose potential harm to aircraft engines. ICP analysis showed the presence of heavy and toxic metals in concentrations that may pose harm to human health. Bulk sand samples from Abu Dhabi sites showed chemical similarities to the atmospheric dust samples. The concentrations of heavy metals, PM2.5, and PM10 are at levels that require further monitoring due to their impact on human health. The two years meteorological monitoring, with the seasonal variations, provided additional regional data in the Arabian Gulf. Furthermore, the study concluded that Sand and Dust storms (SDS) occur more frequently at the northern Arabian Gulf compared to its southern region. The chemical correlation between atmospheric dust and regional desert sand suggests the localized origin of the smaller dust particles that may form by breaking apart of the ground sand grains. As a result of the ongoing urbanization in the region, it is essential to collect additional data from various locations for a longer period of time.

Driven by human activities, air pollution and soil degradation are threatening food production systems. Rising ozone in the troposphere can affect several physiological processes in plants and their interaction with symbiotic microorganisms. Plant responses to ozone may depend on both soil fertility and the ontogenetic stage in which they are exposed. In this work, we studied the effects of ozone episodes and soil fertility on soybean plants. We analysed soybean plant responses in the production of aboveground and belowground biomass, structural and functional attributes of rhizobia, and seed production and quality. The experiment was performed with plants grown in two substrates with different fertility (commercial soil, and soil diluted (50%, v/v) with sand). Plants were exposed to acute episodes of ozone during vegetative and reproductive stages. We observed that ozone significantly reduced belowground biomass (≈25%), nodule biomass (≈30%), and biological nitrogen fixation (≈21%). Plants exposed to ozone during reproductive stage growing in soil with reduced fertility had lower seed production (≈10% lower) and seed protein (≈12% lower). These responses on yield and quality can be explained by the observed changes in belowground biomass and nitrogen fixation. The negative impact of ozone on the symbiotic interaction with rhizobia, seed production and quality in soybean plants were greater in soils with reduced fertility. Our results indicate that food security could be at risk in the future if trends in ozone concentration and soil degradation processes continue to increase.

Uranyl carbonate (UC(VI)) is a stable form of uranyl (U(VI)) that widely coexists with amorphous colloidal silica (ACSi) and humic acid (HA) in carbonate-rich U-contaminated areas. In this context, the cotransport behavior and mechanism of UC(VI) with ACSi (100 mg L⁻¹) and HA colloids in saturated porous media were systematically investigated. It was found that the ACSi and strip-shaped HA have a strong adsorption capacity for UC(VI), and their adsorption distribution coefficient (Kd) is 4–5 orders of magnitude higher than that of quartz sand (QS). In the ternary system, UC(VI) was mainly existing in the colloid-associated form at low UC(VI) concentration (4.2 × 10⁻⁶ M). Compared with the individual transport of UC(VI), the presence of ACSi and strip-shaped HA in the binary system promotes the transport of low-concentration UC(VI) (4.2 × 10⁻⁶ M) but shows a hindering effect when UC(VI) = 2.1 × 10⁻⁵ M. When ionic strength (IS) increased from 0 to 100 mM, the individual transport of UC(VI) and ACSi was weakened owing to the masking effect and the compression of the electrical double layer, respectively; this weakening effect is more pronounced in the binary (UC(VI)–ACSi) system. Notably, the transport of UC(VI) and ACSi in the ternary system is independent of the changes in IS due to the surface charge homogeneity strengthening the electrostatic repulsion between HA and QS. The Derjaguin–Landau–Verwey–Overbeek theory and retention profiles reveal the co-deposition mechanism of ACSi and UC(VI) in the column under different hydrochemical conditions. The nonequilibrium two-site model and the mathematical colloidal model successfully described the breakthrough data of UC(VI) and ACSi, respectively. These results are helpful for evaluating the pollution caused by UC(VI) migration in an environment rich in HA and formulating corresponding effective control strategies.

Amongst other threats, the world’s oceans are faced with man-made pollution, including an increasing number of microparticulate pollutants. Sponges, aquatic filter-feeding animals, are able to incorporate fine foreign particles, and thus may be a potential bioindicator for microparticulate pollutants. To address this question, 15 coral reef demosponges sampled around Bangka Island (North Sulawesi, Indonesia) were analyzed for the nature of their foreign particle content using traditional histological methods, advanced light microscopy, and Raman spectroscopy. Sampled sponges accumulated and embedded the very fine sediment fraction (<200 μm), absent in the surrounding sand, in the ectosome (outer epithelia) and spongin fibers (skeletal elements), which was confirmed by two-photon microscopy. A total of 34 different particle types were identified, of which degraded man-made products, i.e., polystyrene, particulate cotton, titanium dioxide and blue-pigmented particles, were incorporated by eight specimens at concentrations between 91 and 612 particle/g dry sponge tissue. As sponges can weigh several hundreds of grams, we conservatively extrapolate that sponges can incorporate on average 10,000 microparticulate pollutants in their tissue. The uptake of particles, however, appears independent of the material, which suggests that the fluctuation in material ratios is due to the spatial variation of surrounding microparticles. Therefore, particle-bearing sponges have a strong potential to biomonitor microparticulate pollutants, such as microplastics and other degraded industrial products.

Some of the older Swedish roads contain road tar underneath a surface layer of bituminous asphalt. This road tar, also known as tar asphalt, contains large amounts of polycyclic aromatic hydrocarbons (PAHs). There is concern about PAHs spreading from the bottom layers of these older roads to the surrounding environment, and that because of this spreading road tar asphalt should not be recycled but rather placed in landfills. However, a risk assessment of PAH spreading below roads has not yet been conducted. The first aim of this study was to assess this potential spreading of PAHs from underlying tar asphalt to the sand beneath, the soil next to the roads, as well as nearby groundwater. The second aim was to measure the bioavailability and estimate the toxicity of PAHs in all relevant media using polyoxymethylene (POM) passive samplers. Four road sections and nearby groundwater in northern Sweden were investigated, including a control road without tar asphalt. PAHs were detected in all analysed solid media at varying concentrations: in asphalt from 2.3 to 4800 mg kg⁻¹, in underlying sand from <1.5 to 460 mg kg⁻¹ and in slope soil from <1.5 to 36 mg kg⁻¹. However, the spread of PAHs from the asphalt to roadside soil and groundwater was very limited. Groundwater at most of the road sections contained very low or non-detectable levels of PAHs (<0.08–0.53 μg L⁻¹, excluding one site where fuel contamination is hypothesized). The PAHs generally showed low bioavailability. Only asphalt with PAH content >1200 mg kg⁻¹ exhibited bioavailable concentrations that exceeded threshold concentrations for serious risk. The most PAH contaminated sand and soil samples exhibited low toxicity when considering bioavailability, only in some cases exceeding chronic toxicity threshold concentrations. These results were compared with the Swedish EPA's guideline values for PAH in contaminated soil, which is shown to overpredict toxicity for these sites. Further research on the leaching and transportation processes of PAHs from subsurface tar asphalt is recommended for developing risk analysis approaches.