Petroleum refining industries produce large amounts of toxic effluents, causing environmental pollution. Iran is an oil-rich country that encounters oil pollution in its soil and water. Bioremediation of these pollutants is an appropriate solution to tackle them, compared to physical and chemical remediation methods. There are some factors that increase the rate of biodegradation; therefore, this study aims to determine the rate of gasoil bioremediation by two indigenous bacterial isolates (from oil-contaminated soils of an oil refinery south of Tehran) in two different media, namely soil and soil-sawdust mixture. The two superior indigenous bacteria has been isolated through three steps with results indicating that in an optimal environmental condition (temperature= 27±2 °C, humidity of 60%, water holding capacity, and daily manual aeration), bacterial isolates are able to degrade about 78.87% and 93.53% of gasoil during 45 days in soil and soil-sawdust mixture media, respectively. These results imply the role of sawdust in improving aeration, water holding capacity, and-consequently- increasing bioavailability of gasoil to bacteria.

Sawdusts of hardwood - oak and black locust, modified with formaldehyde and/or alkali solution, were used as adsorbents zinc ions from model water. The influence of concentration of alkali solution for modification, on zinc ions adsorption efficiency were investigated. Batch adsorption tests were conducted on ambient temperature. Langmuir and Freundlich adsorption isotherm equations were determinated for some adsorbents investigated. Good improvement of adsorption characteristics is achieved by modification of sawdust with alkali. Modification of sawdusts only with formaldehyde results with good prevention of leaching of organic substances as well as poor increase of adsorption efficiency.

Leaching of herbicides in cropping soils not only impacts the groundwater sources but also reduces their effect in controlling weeds. Leaching studies were carried out in two cropping soils and two forestry biowaste media, wood pulp and sawdust with two herbicides, atrazine and bromacil in a packed lysimeter with simulated rainfall. The hypothesis was that high organic matter forestry biowaste soil amendments reduce the leaching of herbicides through the soil profile. Results from the experimental setups varied due to the impact of the simulated rainfall on the surface structure of the media. Organic carbon content, pH and structure of the media were all factors which affected the leaching of the two herbicides. The hypothesis was true for wood pulp, but for sawdust, organic matter content had less bearing on the leaching of the herbicides than other over-riding factors, such as pH, that were media specific. In sawdust, its large particle size and related pore volume allowed preferential flow of herbicides. Overall, the data indicated that both forestry biowastes were retentive to herbicide leaching, but the effect was more pronounced with wood pulp than sawdust.

Studies in the literature concern the toxicity of nanoparticles either in a Petri dish or in agar media-based tests. Therefore, for environmental relevance, individual and binary mixtures of metal oxide nanoparticles (M-NPs) cadmium oxide (CdO-NP) and copper oxide (CuO-NP) were tested in this study for their effect on Vigna radiata in soil with and without the addition of sawdust. Seed germination was 67% in 100 mg CuO-NP in soil without sawdust. Seeds failed to germinate in 100 mg CdO +100 mg CuO-NPs in soil without the addition of sawdust and germination was 83% at the same concentration in soil with sawdust. In sawdust added to soil, when compared with control (soil without M-NPs), the maximum reduction in shoot (82%) and root (80%) length and wet (61%) and dry (54%) weight of plant was recorded in CdO-NP treated soil. Similarly, compared with control (soil without sawdust and M-NPs), the percent reduction in shoot (61%) and root (70%) length and wet (44%) and dry (48%) weight was highest in CdO-NP treated soil not supplemented with sawdust. In a binary mixture test (CdO-NP + CuO-NP), the addition of sawdust promoted the above plant growth parameters compared with individual CdO-NP and CuO-NP tests. Cadmium (511 mg kg⁻¹ for individual and 303 mg kg⁻¹ for binary mixture tests) and Cu (953 mg kg⁻¹ for individual and 2954 mg kg⁻¹ for binary mixture tests) accumulation was higher in plants grown in soil without sawdust. The beneficial effect of sawdust addition was observed in seed germination, plant growth, and metal accumulation. With or without sawdust, the binary mixture of CdO and CuO was antagonistic. These results indicate that sawdust can prevent M-NP-induced toxicity and reduce metal accumulation in plant tissues.

Properly increasing mobility of heavy metals could promote phytoremediation of contaminated soil. Fe₁₋ₓS/biochar was successfully prepared from sawdust with loading pyrrhotite (Fe₁₋ₓS) at a pyrolysis temperature of 550 °C. Thiobacillus were successfully adsorbed and enriched on the surface of Fe₁₋ₓS/biochar. Microbial growth for 36 d supported by bio-oxidization of Fe₁₋ₓS decreased the system pH from 4.32 to 3.50, increased the ORP from 298 to 487 mV, and the Fe³⁺ release reached 25.48 mg/g, enhancing the oxidation and leaching of soil Pb. Finally, Fe₁₋ₓS/biochar and Thiobacillus were simultaneously applied into Pb-contaminated soil for 60 d, the soil pH decreased from 7.83 to 6.72, and the exchangeable fraction of soil Pb increased from 22.86% to 37.19%. Ryegrass planting for 60 d in Pb-contaminated soil with Fe₁₋ₓS/biochar and Thiobacillus showed that the Pb content in shoot and root of ryegrass increased by 55.65% and 73.43%, respectively, confirming an obvious increase of phytoavailability of soil Pb. The relative abundance of Thiobacillus in remediated soil significantly increased from 0.06% to 34.55% due to the addition of Fe₁₋ₓS/biochar and Thiobacillus. This study provides a novel approach for regulating the Pb phytoavailability for phytoremediation of Pb-contaminated soil.

This study investigated catalytic ozone oxidation using a sawdust char (SDW) catalyst to remove hazardous toluene emitted from the chemical industry. The catalyst properties were analyzed by proximate, ultimate, nitrogen adsorption-desorption isotherms, Fourier-transform infrared, and X-ray photoelectron spectroscopy analyses. In addition, hydrogen-temperature programmed reduction experiments were conducted to analyze the catalyst properties. The specific area and formation of micropores of SDC were improved by applying KOH treatment. MnOx/SDC-K3 exhibited a higher toluene removal efficiency of 89.7% after 100 min than MnOx supported on activated carbon (MnOx/AC) with a removal efficiency of 6.6%. The higher (Oₐdₛ (adsorbed oxygen)+Oᵥ(vacancy oxygen))/OL (lattice oxygen) and Mn³⁺/Mn⁴⁺ ratios of MnOx/SDC-K3 than those of MnOx/AC seemed to be important for the catalytic oxidation of toluene.

Additives are considered a promising approach to accelerate the composting process and alleviate the dissemination of pollutants to the environment. However, nearly all previous articles have focused on the impact of additive amounts on the reduction of HMs, which may not fully represent the main factor shaping HMs bioavailability status during composting. Simultaneously, previous reviews only explored the impacts, speciation, and toxicity mechanism of HMs during composting. Hence, a global-scale meta-analysis was conducted to investigate the response patterns of HMs bioavailability and compost parameters to different additives, composting duration, and composting factors (additive types, feedstock, bulking agents, and composting methods) by measuring the weighted mean values of the response ratio "[ln (RR)]" and size effect (%). The results revealed that additives significantly lessened HMs bioavailability by ≥ 40% in the final compost products than controls. The bioavailability decline rates were −40%, −60%, −57%, −55%, −42%, and −44% for Zn, Pb, Ni, Cu, Cr, and Cd. Simultaneously, additives significantly improved the total nitrogen (TN) (+16%), pH (+5%), and temperature (+5%), and decreased total organic carbon (TOC) (−17%), moisture content (MC) (−18%), and C/N ratio (−19%). Furthermore, we found that the prolongation of composting time significantly promoted the effect of additives on declining HMs bioavailability (p < 0.05). Nevertheless, increasing additive amounts revealed an insignificant impact on decreasing the HMs bioavailability (p > 0.05). Eventually, using zeolite as an additive, chicken manure as feedstock, sawdust as a bulking agent, and a reactor as composting method had the most significant reduction effect on HMs bioavailability (p < 0.05). The findings of this meta-analysis may contribute to the selection, modification, and application of additives and composting factors to manage the level of bioavailable HMs in the compost products.

Batch sorption of metformin hydrochloride (MET) onto a specially designed biochar mix consisting of both macro (MAC) and micro (MIC) algae, rice husk and pine sawdust was conducted. Pyrolysis of both MAC and MIC algae mixture was done followed by chemical activation with hydrogen-peroxide. Additionally, sorption of MET under the influence of pH was separately investigated. Batch studies of isotherms were well described by Freundlich model with high non-linearity and Freundlich exponent values ranged anywhere from 0.12 to 1.54. Heterogeneity of MET adsorption to the bonding sites was attributed to the surface functional groups of the modified biochar. Amongst the four biochars, the activated macroalgae biochar (MACAC) and microalgae biochar (MICAC) depicted favourable adsorption of MET with maximum adsorption at pH 7. Up to 76% of MET removal from the environment was obatained using the MACAC biochar. Scanning electron micrographs coupled with energy dispersive X-ray, as well as elemental analyses confirmed formation of oxygen containing surface functional groups due to activation strengthening chemisorption as the main sorption mechanism. Further, Fourier transform infra-red spectroscopy and other surface functional group analyses along with Zeta potential measurements reinforced our proposed sorption mechanism. Lowest zeta potential observed at pH 7 enhanced the electrostatic force of attraction for both the biochars. Negative zeta potential value of the biochars under different pH indicated potential of the biochars to adsorb other positively charged contaminants. From a techno-economic perspective, capital expenditure cost is not readily available, however, it is envisaged that production of pyrolyzed biochar from algal biomass could make the process economically attractive especially when the biochar could be utilised for high-end applications.

The spread of antibiotic resistance genes (ARGs) is a global environmental issue. Dissolved biochar is more likely to contact bacteria in water, producing ecological risks. This study explored the effects of dissolved biochar on ARGs transfer in bacteria. Conjugative transfer efficiency was significantly different following treatment with different types of dissolved biochar. Typically, humic acid-like substance in dissolved biochar can significantly improve the transfer efficiency of ARGs between bacteria. When the concentration of dissolved biochar was ≤10 mg biochar/mL, humic acid-like substance substantially promoted ARGs transfer. An increase in dissolved biochar concentration weakened the ARGs transfer from humic acid-like substance. The inhibitory effects of small-molecule matters dominated, decreasing conjugative transfer frequency. At a concentration of 100 mg biochar/mL, the conjugative transfer efficiency of all treatments was lower than that of control. Compared with corn straw dissolved biochar, there were more transconjugants in pine sawdust dissolved biochar. Following treatment with 10 mg biochar/mL pine sawdust dissolved biochar, the number of transconjugants was at its maximum; approximately 7.3 folds higher than the control. We also explored mechanisms by which dissolved biochar impacts conjugative transfer. Due to the complex composition of dissolved biochar, its effects on the expression of conjugative transfer-related genes were also dynamic. This study investigates the ecological risk of biochar and guides its scientific application.

Sawdust wastes were used as precursors to prepare adsorbents by combustion and pyrolysis for experimental and mechanism studies and determine the potential of biomass extracted from agro-industrial residues for Pb-polluted soil remediation. Pot experiments were conducted on contaminated soils near Pb–Zn mining with sawdust ash (SA) and sawdust biochar (SB) in different proportions and dosage ratios. Studies have indicated that the application of biomass materials can enhance the adsorption, complexation and precipitation of Pb cations in soil and reduce the mobility of Pb. The concentrations of SPLP-Pb and DTPA-extractable Pb in amended soils were the lowest under 1% 1:2 and 5% 1:1 treatment, respectively. Results of fraction extraction and XANES analysis showed that the materials change the main forms of Pb in soil. Moreover, the binding behavior of Pb with organic matter increases the proportion of Pb (Ac)₂, leading to the transformation of high toxicity Pb-compounds into precipitates and complexes. The remediation methods of 2% 1:2 and 5% 1:2 were better than those of other methods in stabilizing Pb in soil. This study indicated that heat-treated sawdust can be used for Pb-polluted soil remediation, which is a type of environmental remediation measure with considerable ecological potential.