Microplastic pollution in estuarine and coastal environments has recently been characterised in several countries but few researchers have addressed the influence of different forms of coastal zone use on the distribution of microplastic. Here, microplastic particles were sampled in Hangzhou Bay, which is heavily influenced by a range of human activities, and their abundance, size, and polymer type characterised. The abundance of microplastics was 0.14 ± 0.12 items/m³ in water, 84.3 ± 56.6 items/kg dry weight of sediment, and between 0.25 ± 0.14 and 1.4 ± 0.37 items/individual in biota. These results show that Hangzhou Bay has a low level of microplastic contamination compared to other coastal systems in China, although abundance was spatially variable within the bay; relatively higher microplastic abundances were found in the southern area of the bay, which has adjacent industrial and urban land-use zones, while lower abundances were observed in the central and northern bay areas where mariculture, fisheries, and mineral and energy industries are most common. The relatively low microplastic abundance observed in the biota samples is consistent with the generally low values for the seawater and sediment samples. Pellets were the most common of four particle-shape classes (fibres, fragments, films, and pellets) in surface seawater, while fibres were most abundant in sediment and biota. Smaller-sized microplastics (<1.0 mm) were dominant in all samples. Microplastics in the surface seawater were dominated by low-density polypropylene and polyethylene particles, while rayon was dominant in the sediment and biota samples. Our results demonstrate that regional variability in anthropogenic activity and land-use are important controls on the spatial pattern of microplastic pollution in Hangzhou Bay.

Over three different seasons, seawater, porewater and sediment samples were collected from Jinzhou Bay, a previously heavily contaminated bay, to quantitatively assess the benthic flux of trace metals after a reduction in fluvial/sewage discharge for almost three decades. The spatial distribution patterns of trace metals in seawater, surface sediment, as well as the vertical distribution patterns of metals in porewater and solid phases in short sediment cores were reported. Metal concentrations in seawater and sediment all showed much higher Cd and Zn concentrations inside the Jinzhou Bay compared to the rest of Bohai Sea area. Zn, Ni, Pb and Co all had average benthic fluxes coming out of the sediments to the water column, contributing about 0.5%, 0.3%, 1.4% and 14% to their current standing stock in Jinzhou Bay. Seasonal difference was also identified in seawater and porewater, as well as in the benthic fluxes. In general, benthic fluxes and porewater concentrations all tended to be higher in summer, implying a close relationship between benthic flux and the temperature-dependent organic matter degradation process at the sediment-water interface.Currently, there are clearly still other sources, possibly fluvial/sewage discharge, as the main source of trace metals in Jinzhou Bay waters. For Cd and Cu, concentrations in the water column remain high on an annual basis indicating that sediment still acts as a sink. Conversely, for Pb, Zn, Co, and Ni, the sediment is beginning to act as a source to the water column. Although this may not yet be significant, it will become more and more important with time, and can last for hundreds to thousands of years.

Mercury (Hg) is among contaminants of public concern due to its prevalent existence, high toxicity, and bioaccumulation through food chains. Elevated Hg has been detected in seafood from the East China Sea (ECS), which is one of the largest marginal seas and an important fishing region in the northwestern Pacific Ocean. However, there is still a lack of knowledge on the distribution of Hg species and their controlling factors in the ECS water column, thus preventing the understanding of Hg cycling and the assessment of Hg risks in the ECS. In this study, two cruises were conducted in October 2014 and June 2015 in order to investigate the distribution of total Hg (THg) and methylmercury (MeHg) and their controlling factors in the ECS. The concentrations of THg and MeHg were determined to be 4.2 ± 2.8 ng/L (THg) and 0.25 ± 0.13 ng/L (MeHg) in water from the ECS. The level of Hg in the ECS occupied the higher rank among the marginal seas, thus indicating significant Hg contamination in this system. Both the THg and MeHg presented complicated spatial distribution patterns in the ECS, with high concentration areas located in both the nearshore and offshore areas. Statistical analyses suggest that temperature (T) and Hg in sediment may be the controlling factors for THg distribution, while dissolved organic matter (DOM), T, and MeHg in the sediment may be the controlling factors for MeHg distribution in the seawater of the ECS. The relative importance of these environmental factors in Hg distribution depends on the water depth. T-salinity (S) diagram analyses showed that water mass mixing may also play an important role in controlling THg and MeHg distribution in the coastal ECS.

Human-induced temperature changes influence coastal regions, both via thermal pollution and ocean warming, which exerts profound effects on the chemistry of metals and the physiology of organisms. However, it remains unknown whether the increased temperature of discharged water or ocean warming, as a result of climate change, lead to an increase of human health risks associated with the consumption of sea foods. In this study, the influence of temperature on metal accumulation by oysters was studied in individuals collected from a coastal area affected by the thermal water discharge of the Houshi Power Plant, China. The bioaccumulation factor (BAF) and oral bioavailability (OBA) of metals in oysters was determined. Elevated temperatures led to an increase in BAF for Cu, Zn, Hg, and Cd (p < 0.05), but no change was observed for As and Pb (p > 0.05). The OBA for Cd, As, and Pb correlated positively to elevated temperatures (p < 0.05). However, for Cu and Zn, OBA was negatively correlated with increasing temperature (p < 0.05). As, Pb, and Cd in the trophically available metal (defined as a sum of heat-stable proteins, heat-denaturable proteins, and organelles) was significantly elevated at the highest temperature seawater site (site A) compared to the lowest seawater site (site B). Thus, the irregular variation of OBA for each metal may be the result of variations in the subcellular distribution of metals and the protein quality influenced by the increased temperature. Moreover, the increased temperature and increased the hazard quotient values of As and Cd (p < 0.05 for As, n = 6, p < 0.05 for Cd, n = 6), which provided an indication of the potential risks of the consumption of oysters or other seafood to future warming under climate change scenarios.

Plastics pollution has been recognized as a serious environmental problem. Nevertheless, new plastic uses, and applications are still increasing. Among these new applications, three-dimensional resin printers have increased their use and popularity around the world showing a vertiginous annual-sales growth. However, this technology is also the origin of residues generation from the alcohol cleaning procedure at the end of each printing. This alcohol/resin mixture can originate unintentionally very small plastic particles that usually are not correctly disposed, and as consequence, could be easily released to the environment. In this work, the nanoparticle generation from 3D printer’s cleaning procedure and their physicochemical characterization is reported. Nano-sized plastic particles are easily formed when the resin residues are dissolved in alcohol and placed under UV radiation from sunlight. These nanoparticles can agglomerate in seawater showing an average hydrodynamic diameter around 1 μm, whereas the same nanoparticles remain dispersed in ultrapure water, showing a hydrodynamic diameter of ≈300 nm. The formed nanoparticles showed an isoelectric point close to pH 2, which can facilitate their interaction with other positively charged pollutants. Thus, these unexpected plastic nanoparticles can become an environmental issue and public health risk.

Sea level rise induced-salinization is lowering coastal soils productivity. In order to assess the effects that increased salinity may provoke in terrestrial plants, using as model species: Trifolium pratense, Lolium perenne, Festuca arundinacea and Vicia sativa, two specific objectives were targeted: i) to determine the sensitivity of the selected plant species to increased salinity (induced by seawater-SW or by NaCl, proposed as a surrogate of SW) and, ii) to assess the influence of salinization in total biomass under different agricultural practices (mono- or polycultures).The four plant species exhibited a higher sensitivity to NaCl than to SW. Festuca arundinacea was the most tolerant species to NaCl (EC₅₀,ₛₑₑd gₑᵣₘᵢₙₐₜᵢₒₙ and EC₅₀,gᵣₒwₜₕ of 18.6 and 10.5 mScm⁻¹, respectively). The other three species presented effective conductivities in the same order of magnitude and, in general, with 95% confidence limits overlapping. Soil moistened with SW caused no significant adverse effects on seed germination and growth of L. perenne. Similar to NaCl, the other three species, in general, presented a similar sensitivity to SW exposure with EC₅₀,ₛₑₑd gₑᵣₘᵢₙₐₜᵢₒₙ and EC₅₀,gᵣₒwₜₕ within the same order of magnitude and with confidence limits overlapping.The agricultural practice (mono-vs polyculture) showed some influence on the biomass of each plant species. When considering total productivity, for aerial and root biomass, it was higher in control comparatively to salinization conditions. Under salinization stress, the practice of polyculture was associated with a higher aerial and root total biomass than monocultures (for instance with combinations with T. pratense and F. arundinacea).Results suggest that the effects of salinity stress on total productivity may be minimized under agricultural practices of polyculture. Thus, this type of cultures should be encouraged in low-lying coastal ecosystems that are predicted to suffer from salinization caused by seawater intrusions.

The extensive use of melamine and its three derivatives (i.e., ammeline, ammelide, and cyanuric acid) resulted in their widespread occurrence in the environment. Nevertheless, limited information is available on their distribution in the aquatic environment. In this study, concentrations and profiles of melamine and its derivatives were determined in 223 water samples, comprising river water, lake water, seawater, tap water, bottled water, rain water, wastewater, and swimming pool water, collected from New York State, USA. The sum concentrations of melamine and its derivatives (∑₄MELs) decreased in the following order: swimming pool water (median: 1.5 × 10⁷ ng/L) ≫ wastewater (1240) > precipitation (739) > tap water (512) > river water (370) > lake water (347) > seawater (186) > bottled water (98). Cyanuric acid was the major compound, accounting for 60–100% of ∑₄MELs concentrations in swimming pool water, wastewater, precipitation, tap water, seawater, and bottled water, whereas melamine dominated in river and lake water (54–64% of ∑₄MELs). Significant positive correlations (0.499 < R < 0.703, p < 0.002) were found between the concentrations of melamine and atrazine (a triazine herbicide) in surface waters. The geographic distribution in the concentrations of ∑₄MELs in river, lake, and tap water corresponded with the degree of urbanization, suggesting that human activities contribute to the sources melamine and cyanuric acid in the aquatic environments. A preliminary hazard assessment of melamine and cyanuric acid in waters suggested that their ecological or human health risks were minimal. This is the first study to document the occurrence and spatial distribution of melamine and its derivatives in waters from the United States.

Ecological risk assessment associated with seawater intrusions has been supported on the determination of lethal/sublethal effects following standard protocols that force exposure neglecting the ability of mobile organisms to spatially avoid salinized environments. Thus, this work aimed at assessing active emigration from climate change-caused seawater intrusion into freshwater habitats. To specific objectives were delineated: first, to compute median 12-h avoidance conductivities (AC₅₀,₁₂ₕ) for freshwater species, and second, to compare it with literature data (LC₅₀,₄₈ ₒᵣ ₉₆ₕ, EC₅₀,₆ ₒᵣ ₂₁d) to assess the relevance of the inclusion of stressor-driven emigration into risk assessment frameworks. Four standard test species, representing a broad range of ecological niches – Daphnia magna, Heterocypris incongruens, Danio rerio and Xenopus laevis – were selected. The salt NaCl was used as a surrogate of natural seawater to create the saline gradient, which was established in a 7-compartment system.At each specific LC₅₀, ₄₈ ₒᵣ ₉₆ₕ, the proportion of avoiders were well above 50%, ranging from 71 to 94%. At each LC₅₀, considering also avoiders, populations would decline by 85–97%. Furthermore, for D. magna and X. laevis it was noticed that at the lowest conductivities eliciting mortality, the avoidance already exceeded 50%.The results showed that the emigration from salinity-disturbed habitats exists and that can even be more sensitive than standard endpoints. Looking solely to standard endpoints involving forced exposure may greatly underestimate the risk of local population extinction, because habitat function can be severely disrupted, with subsequent stressor-driven emigration, before any adverse physiological effects at the organism level. Thus, the present study highlights the need to include non-forced exposure testing into ecological risk assessment, namely of salinity-menaced costal freshwaters.

Pharmaceutically active compounds (PhACs) have attracted increasing attention due to their large consumption volumes, high bioactivity and potential ecotoxicity. In this study, a total of 150 commonly used drugs were investigated in sediments of Jiaozhou Bay (JZB). Twenty-five target compounds were detected, of which ten were discovered for the first time in marine sediments. The range of total PhAC content was 3.62–21.4 ng/g dry weight. Ketoprofen (2.49 ng/g), oxytetracycline (1.00 ng/g) and roxithromycin (0.97 ng/g) were the preponderant PhACs. PhACs gradually decreased from east to west, and the distribution of PhACs in the sediment was controlled by the source channel, seawater dynamic process and sediment composition. The diatom, organic matter, and clay proportions in the sediments and the nutrients in the overlying water were the most important environmental factors affecting the distribution of PhACs. PhAC pollution in the sediments of the JZB exhibited an increasing trend. Coprostanol could be used as a chemical indicator of the PhAC concentration in JZB sediments. PhACs were mainly derived from direct pollution due to human fecal excretion in the eastern region. Ofloxacin, tetracycline and oxytetracycline were found to pose high or medium risks to aquatic organisms. It is necessary and urgent to improve the treatment technology of drug residues in sewage treatment plants to decrease the pollution of PhAC residues. With the continuous aging of the global population, the use of PhACs will increase rapidly, which may cause more unpredictable threats to the marine ecosystem. Therefore, the monitoring of PhACs in the marine environment needs to be strengthened, and studies on PhAC occurrence and effects must be considered a priority in global environmental research.

This work investigated levels of PAHs and HMs in fourteen species from seven genera of scleractinian corals, adjacent sediments, and surface seawater in Hainan, China. The sources of contaminations were analyzed as well. The results showed that scleractinian corals had a relatively higher bioaccumulation capacity for PAHs from sediments than for HMs. There were inter-species differences for these contaminants enriched in corals. Pavona varians and Porites lutea could accumulate PAHs more readily. While higher concentrations of Cr, Mn and Pb occurred in Favites flexuosa, other metal levels, such as for Ni, Cu, Zn and As, were found to be elevated in Pocillopora damicornis, as well as for Cd in Acropora echinata. It was found that PAHs originated from petrogenic and pyrolytic sources, and were mainly linked to onshore and on-sea activities, such as motorboats. Mn, Ni, As and Cd were from crustal materials or natural weathering, while Cr, Cu, Zn and Pb were non-crustal origin connecting with the use of anti-fouling boat paint and agricultural and/or aquacultural chemicals. This study suggested that corals could serve as good bioindicators for two types of chemical pollution in the reef system, especially for the two species P. varians and P. lutea for PAHs contaminants.