Refine search
Results 1-6 of 6
Effects of the triazine herbicide, simetryn, on freshwater plankton communities in experimental ponds
1995
Kasai, F. | Hanazato, T. (Regional Environment Division, National Institute for Environmental Studies, Tsukuba, Ibaraki 305 (Japan))
Effects of simetryne on growth of various freshwater algal taxa
1993
Kasai, F. | Takamura, N. | Hatakeyama, S. (Regional Environment Division, National Institute for Environmental Studies, Tsukuba, Ibaraki 305 (Japan))
Contamination, dynamics, and health risk assessment of pesticides in seawater and marine samples from the Seto Inland Sea, Japan
2022
Chidya, Russel | Derbalah, Aly | Abdel-Dayem, Sherif | Kaonga, Chikumbusko | Tsuji, Hiroaki | Takeda, Kazuhiko | Sakugawa, Hiroshi
We assessed the contamination, dynamics, and health risks of the pesticides cyanazine, simetryn, fenarimol, isoprothiolane, diazinon, irgarol, fenitrothion, and diuron in marine samples (seawater, sediments, plankton, fish, and other edible organisms) at various locations in the Seto Inland Sea in Japan in 2016 and 2017. Pesticide concentrations were highest at sampling sites close to the coastline, and mean concentrations in seawater were slightly higher in surface water than in bottom water. All eight pesticides were detected in plankton. Diazinon concentrations (77–387 ng/g dw) were highest in sediments and cyanazine was the most frequently detected pesticide (88%, n = 17) in sediments. Only cyanazine (2.7–41.9 ng/g dw), simetryn (1.0–34.3 ng/g dw), and diazinon (6.3–308.8 ng/g dw) were detected in fish and other edible marine organisms. Based on the calculated bioconcentration factor, the results showed that plankton, fish, and marine animals bioaccumulated pesticides. The highest hazard quotients were calculated for diazinon in red seabream and greenling, indicating a possible risk to consumers. It is, therefore, imperative to promote strict implementation of pollution control, integrated pest management practices, and policy formulation on pesticides. Usage of diazinon must be controlled and monitored to ensure large residues do not reach aquatic ecosystems and marine coastlines.
Show more [+] Less [-]Reliable methods for determination of triazine herbicides and their degradation products in seawater and marine sediments using liquid chromatography-tandem mass spectrometry
2017
Rodríguez-González, N. | Uzal-Varela, R. | González-Castro, M.J. | Muniategui-Lorenzo, S. | Beceiro-González, E.
Triazines and their degradation products are transported to the aquatic environment, and once there, the probability to reach the marine environment is very high. In this paper, solid phase extraction (SPE) and extraction by matrix solid phase dispersion (MSPD) to analyse nine triazines (ametryn, atrazine, cyanazine, prometryn, propazine, simazine, simetryn, terbuthylazine and terbutryn) and eight degradation products (desethylatrazine, desethyldesisopropylatrazine, desethyl-2-hydroxyatrazine, desethylterbuthylazine, desisopropylatrazine, desisopropyl-2-hydroxyatrazine, 2-hydroxyatrazine and 2-hidroxyterbuthylazine) in seawater and marine sediments samples were used. The analysis was carried out using liquid chromatography with tandem mass spectrometry (LC-ESI-MS/MS). The methods were optimized and validated to achieve a selective and sensitive determination of the analytes from different sample, regardless of its complexity. Under the optimum conditions, the proposed methods provided adequate limits of quantification (0.05–0.45 μg L⁻¹ and 0.23–4.26 μg kg⁻¹ in seawater and marine sediments, respectively). Intra- and inter-day relative standard deviation were below 1.41% for all compounds. Recoveries were evaluated, and acceptable values that ranged from 87.5–99.4 and 60.9–99.7% for the seawater and sediment samples, respectively, were obtained. The proposed methods were applied to the analysis of the target compounds in seawater samples and marine sediments from a coastal area of Galicia (NW of Spain).
Show more [+] Less [-]A new effect residual ratio (ERR) method for the validation of the concentration addition and independent action models
2010
Wang, Li-Juan | Liu, Shu-Shen | Zhang, Jing | Li, Wei-Ying
Background, aim, and scope Glutaraldehyde (GA) often acts as an effective sterilant, disinfectant, and preservative in chemical products. It was found that GA had clearly acute toxicity to aquatic organisms. Furthermore, GA in natural environment could not exist as single species but as complex mixtures. To explore the toxicity interaction between GA and the other environmental pollutant, it is necessary to determine the mixture toxicities of various binary mixtures including GA. Two reference models, concentration addition (CA) and independent action (IA), are often employed to evaluate the mixture toxicity, which can be finished by comparing the concentration-response curves (CRCs) predicted by the reference models with the experimental CRC of the mixture. However, the CRC-based method cannot effectively denote the degree of the deviations from the reference models, especially at very low effect levels. Though the model deviation ratio (MDR) can be used to quantitatively evaluate the deviation of a mixture at EC50 level from the reference model, it is difficult to evaluate the deviations at the lower effect levels. Therefore, the primary aim of this study was to develop a new effect residual ratio (ERR) method to validate the deviations from the reference models at various effect levels. Materials and methods Four chemicals having possible dissimilar mode of actions with GA, acetonitrile (ACN), dodine (DOD), simetryn (SIM), and metham sodium (MET), were selected as another component in the binary mixtures including GA, which constructed four binary mixtures, GA-ACN, GA-DOD, GA-SIM, and GA-MET ones. For each binary mixture, two equipotent mixture rays where the concentration ratios of GA to another mixture component are respectively EC50 and EC5 ones were designed and their toxicities (expressed as a percent inhibition to Photobacterium phosphoreum) were determined by microplate toxicity analysis. The observed concentration-response curve (CRC) of a ray was compared with that predicted by CA or IA model to qualitatively assess the toxicity interaction of the mixture ray. To quantitatively and effectively examine the deviations at various effect levels from the reference models, a new concept, ERR at an effect, was defined, and the ERR was employed to evaluate the deviation at various effects with confidence intervals. Results For three binary mixtures, GA-ACN, GA-DOD, and GA-SIM, the CRCs predicted by IA models were almost located in the 95% confidence intervals of the experimental CRCs for both equipotent mixture rays, which indicated the independent actions between binary mixture components. However, two rays of GA-MET binary mixture displayed a little synergistic action because both CRCs predicted by CA and IA were lower than the experimental CRC. ERR showed the same results as MDR, but ERR results at low effect area were clearer than MDR ones. Discussion In CRC comparison, the deviation of CA (for GA-ACN, GA-DOD, and GA-SIM combinations) or IA (for GA-MET) model from the experimental values could be obviously observed at medium area of the CRC. However, at very low effect levels, both deviations of CA and IA and difference between CA and IA model predictions were not very apparent. Thus, it was difficult to confirm which model, CA or IA, had better predicted power at very low effect levels. MDR in many literatures often refers to a ratio at EC50 level. It was also difficult to reflect not only the deviation fact at the other ECx but also the deviation uncertainty. After we extended the definition of MDR to all ECx and examined the 95% confidence intervals based on observation, the plot of the redefined MDRs at many effect levels could better explain the deviations of CA or IA model from the observation. However, MDRs at very low effect levels did not still reflect the high uncertainty there. The ERRs defined in our paper could explicitly explain the degree of deviation from the reference models and especially reflect the high uncertainty at very low effects. It could be said that the ERR is a better indicator than MDR. Conclusions The new ERR validation method developed in our laboratory could provide us with the information about the toxicity interaction between the mixture components and quantitatively assess the accuracy of the reference models (CA or IA) at whole effect levels. The ERR method conquered the invalidation of the classical CRC comparison method on the deviation decision at low effect levels and also got the advantage over the MDR methods. Recommendations and perspectives It holds promise to become an effective method of hazard and risk assessments of chemical mixtures by well characterizing the uncertainty at very low effect levels.
Show more [+] Less [-]An environmentally friendly method for the determination of triazine herbicides in estuarine seawater samples by dispersive liquid–liquid microextraction
2015
Rodríguez-González, N. | Beceiro-González, E. | González-Castro, M. J. | Muniategui-Lorenzo, S.
A fast, simple, sensitive and green chemistry method using dispersive liquid–liquid microextraction (DLLME) for the simultaneous determination of seven triazine herbicides (ametryn, atrazine, cyanazine, propazine, simazine, simetryn and terbuthylazine) in estuarine seawater samples has been developed. DLLME was carried out using a small volume of seawater (25 mL) and 300 μL of 1-octanol. Herbicide concentrations were determined by liquid chromatography-diode array detection, and results were confirmed by liquid chromatography-electrospray ionisation tandem spectrometry analysis. The analytical features of the proposed method were satisfactory with repeatability < ±5 % and intermediate precision < ±10 %, and recoveries ranged from 81–102 % for all compounds. All the triazines exhibited linear matrix calibration curves with coefficients of determination >0.999 for all the analytes except for simazine (0.9975). Limits of quantification ranged between 0.19 and 1.12 μg L⁻¹. The method was applied to the analysis of seawater samples from ten points susceptible to contamination by triazines from estuary of A Coruña (Galicia, NW of Spain). The levels of the seven triazines were below the LODs in the analysed samples. Use of proposed method will allow for monitoring of triazines at levels below the regulatory limits set by the European Directive 2008/105/EC of 2 and 4 μg L⁻¹ for atrazine and simazine, respectively.
Show more [+] Less [-]