Methane (CH₄) production from anaerobic digestion of solid and liquid agro-industrial wastes is an attractive strategy to meet the growing need for renewable energy sources and promote environmentally appropriate disposal of organic wastes. This work aimed at determining the CH₄ production potential of six agro-industrial wastewaters (AWW), evaluating the most promising for methanization purposes. It also aims to provide kinetic parameters and stoichiometric coefficients of CH₄ production and define which kinetic models are most suitable for simulating the CH₄ production of the evaluated substrates. The AWW studied were swine wastewater (SW), slaughterhouse wastewater (SHW), dairy wastewater (DW), brewery wastewater (BW), fruit processing wastewater (FPW), and residual glycerol (RG) of biodiesel production. RG was the substrate that showed the highest methanization potential. Exponential kinetic models can be efficiently applied for describing CH₄ production of more soluble substrates. On the other hand, logistic models were more suitable to predict the CH₄ production of more complex substrates.

Sewage samples from 4 hospitals, 1 nursery, 1 slaughter house, 1 wastewater treatment plant and 5 source water samples of Chongqing region of Three Gorge Reservoir were analyzed for macrolide, lincosamide, trimethoprim, fluorouinolone, sulfonamide and tetracycline antibiotics by online solid-phase extraction and liquid chromatography-tandem mass spectrometry. Results showed that the concentration of ofloxacin (OFX) in hospital was the highest among all water environments ranged from 1.660 μg/L to 4.240 μg/L and norfloxacin (NOR, 0.136-1.620 μg/L), ciproflaxacin (CIP, ranged from 0.011 μg/L to 0.136 μg/L), trimethoprim (TMP, 0.061-0.174 μg/L) were commonly detected. Removal range of antibiotics in the wastewater treatment plant was 18–100% and the removal ratio of tylosin, oxytetracycline and tetracycline were 100%. Relatively higher removal efficiencies were observed for tylosin (TYL), oxytetracycline (OXY) and tetracycline (TET)(100%), while lower removal efficiencies were observed for Trimethoprim (TMP, 1%), Epi-iso-chlorotetracycline (EICIC, 18%) and Erythromycin-H2O (ERY-H2O, 24%). Antibiotics were removed more efficiently in primary treatment compared with those in secondary treatment.

Due to high global demand, large amounts of abbattoir waste are generated from pork production. Mismanagement of abattoir waste on agricultural lands can result in soil and water contamination with pathogens and contaminants like metals and nutrients. Therefore, possible effects on soil organisms prior to application should be evaluated. Thus, the aim of this study was to determine the effects of fresh pig abattoir waste (PAWf) and waste after stabilization processes on E. andrei through tests of avoidance behavior, acute toxicity and chronic toxicity. In order to do this, the waste was evaluated fresh (i.e., non-treated), and after aerated composting (PAWa), natural composting (PAWn) and vermicomposting (PAWv). In addition, we used a natural soil with no history of agricultural use as control soil. The evaluation was based on avoidance behavior, mortality, initial and final earthworm weight, and reproduction, in addition to a set of enzyme assays formed by acetylcholinesterase, lipid peroxidation, catalase and glutathione S-transferase measured over time. The ecotoxicological results showed that PAWf and PAWa increased AChE activity at different experimental periods, while PAWn decreased activity at 14 days compared to the control. PAWf and PAWa increased TBARS levels at 7 and 14 days, respectively. CAT activity decreased at 3, 7 and 14 days in PAWv, while GST activity increased at 3 days in PAWa and at 3 and 14 days in PAWf compared to the control. In the acute toxicity test, PAWa and PAWn had a toxic effect on E. andrei, resulting in 100% mortality at 14 days of exposure. Based on our findings, pig abattoir waste should undergo vermicomposting prior to agricultural application to soils.

In this paper, a poultry slaughterhouse wastewater (PSW) was treated in terms of chemical oxygen demand (COD) and color reduction using electro-Fenton (EF) technique under response surface methodology (RSM). The effects of five significant independent variables such as reaction time, pH, H2O2/Fe2+ molar ratio, current density, volume ratio of H2O2/PSW (ml/l) were investigated on the COD and color removal. Experimental data were optimized by Box-Behnken design (BBD) and RSM. The optimum conditions were experimentally found at pH of 4.38, reaction time of 55.60 min, H2O2/Fe2+ molar ratio of 3.73, current density of 74.07 mA/cm2, volume ratio of H2O2/PSW of 1.63 ml/l for 92.37%COD removal and at pH of 3.39, reaction time of 49.22 min, H2O2/Fe2+ molar ratio of 3.62, current density of 67.90 mA/cm2, volume ratio of H2O2/PSW of 1.44 ml/l for 88.06% color removal.

The severe and pervasive effects of multispecies foodborne microbial biofilms highlight the importance of rapid detection and diagnosis of contamination risk in the field using epifluorescence-based techniques (EBT) combined with automatic image-counting software. This study screened the hygiene quality of the environment, the carcass and the slaughtering equipment in the El-Kharga abattoir, New Valley Province, Egypt, to assess possible contamination during slaughter process. In addition, biofilm was assessed, and bacteria was enumerated by epifluorescence microscopy. Using both conventional and EBT, the highest bacterial counts were observed for the slaughtering equipment (6.6 and 5.2 cfu/cm2, respectively), followed by different parts of the carcass (4.1 and 4.4 cfu/cm2, respectively) and environmental samples (3.9 and 4.1 cfu/cm2, respectively). A high prevalence of E. coli O157:H7 was observed on the slaughtering equipment (25%), which also led to carcass (1%) contamination. Moreover, Enterobacteriaceae members were detected during examination, such as Klebsiella pneumoniae, Enterobacter aerogenes, and Raoultella ornithinolytica. Despite the relatively good hygiene quality of the abattoir environment, there is also a high risk associated with biofilm formation by pathogenic microorganisms on the slaughtering equipment. Moreover, EBT showed different structures of the biofilm, including those formed at different maturation stages, such as voids, microbubbles, channels and mushroom shapes. (EBT) microscopy combined with image-counting software could be a candidate substitute to estimate efficiently, precisely and rapidly the microbial aggregation and exposure risk in field than the conventional counting techniques.

This article presents a review of anaerobic treatment technologies to treat slaughterhouse wastewater including its advantages and disadvantages. Physico-chemical characteristics and biochemical methane potential (BMP) of slaughterhouse wastewater are addressed. Various anaerobic treatment technologies are presented with the related operating parameters, viz., hydraulic retention time (HRT), organic loading rate (OLR), upflow velocity (Vᵤₚ), and biogas yield vis-a-vis treatment efficiency in terms of chemical oxygen demand (COD). In addition, various factors that affect the anaerobic treatment of slaughterhouse wastewater such as high oil & grease (O & G) concentration in influent, inhibitors, volatile fatty acids (VFAs), and the loading rate are also addressed. The literature review indicated that the slaughterhouse wastewater can be treated effectively by employing any anaerobic treatment technologies at OLRs up to 5 kg COD/m³.d with more than 80% COD removal efficiency without experiencing operational problems. Anaerobic hybrid reactors (AHRs) were found the most effective among various reviewed technologies because of their ability to operate at higher OLRs (8 to 20 kg COD/m³.d) and lower HRTs (8 to 12 hrs).

The present work evaluated the performance of a consortium designed and formed by five fungal species and four bacterial species isolated from the wastewater of a bovine cattle slaughterhouse to biodegrade organic matter in synthetic slaughterhouse wastewater (SSWW). Individual microorganism’s capability evaluation to remove COD and biodegrade SSWW substrates, together with bacteria-fungus confrontation assays, allowed the formation of nine defined consortia of fungi-bacteria according to a design of two factors with three levels (3²). Seven defined consortia exhibited a higher COD removal from SSWW (81.9 to 93.0%) than that achieved by the bacteria or fungi consortia alone (74.7 to 77.6%). Moreover, three defined consortia of fungi-bacteria achieved the highest substrate (protein, carbohydrate, and fat) biodegradation in SSWW. The microbial growth in the defined consortia was characterized by adjustment to the logistic model (0.041 < μ < 0.091 h⁻¹, 0.9006 < R² < 0.9454), whereas the COD removal efficiency was adjusted to a parabolic statistical model (R² = 0.6201), which showed that a bacterial inoculum between 7 to 20 times greater than the fungal one can lead to the highest consortium capacity to remove COD. This work provides elements that allow designing and forming defined consortia of fungi-bacteria to treat slaughterhouse wastewater with high organic matter levels.

Challenges for better treatment of slaughterhouse wastewater (SWW) stem from too strong organic pollutants as well as the potential existence of various pathogen but conventional biological treatment still has shown its limitation. Using cold plasma, this study investigates the physicochemical deactivation of pathogens while treating organic and inorganic pollutants of slaughterhouse wastewater (SWW). Experiments were conducted by decreasing the hydraulic retention time from 0.16 to 1 L/day to derive the best operating condition based on the performance in the cold plasma oxidation. While operating the continuous plasma process, this study identifies the main mechanisms for nitrogen, phosphorus, and iron removal. The results show that chemical oxygen demand (COD), total nitrogen (TN), and total phosphorus (TP) recorded the removal efficiencies of 78~93, 51~92, and 35~83%, respectively. A slight increase in pH via cold plasma influence total iron (T-Fe) removal up to 93%. Cell counting confirms that bacteria could be removed as much as 98% or more in all the operating conditions tested. Toxicity unit dramatically decreased to less than 1 (~ 96% removal). These results suggest that the cold plasma treatment of SWW might be a viable option to manage organic pollutants, pathogen, and toxicity simultaneously.

The effect of aeration rate on nutrient removal from slaughterhouse wastewater was examined in two 10-L laboratory-scale sequencing batch reactors (SBRs--SBR1 and SBR2) operated at ambient temperature. The contaminants in the slaughterhouse wastewater had average concentrations of 4,000 mg chemical oxygen demand (COD) L⁻¹, 350 mg total nitrogen (TN) L⁻¹ and 26 mg total phosphorus (TP) L⁻¹. The duration of a complete SBR operation cycle was 8 h and comprised four operational phases: fill (7 min), react (393 min), settle (30 min) and draw/idle (50 min). During the react phase, the reactors were intermittently aerated four times at 50-min intervals, 50 min each time. DO, pH and oxidation-reduction potential (ORP) in the reactors were real-time monitored. Four aeration rates--0.2 L air min⁻¹ in SBR1 for 70 days, 0.4 L air min⁻¹ in SBR1 for 50 days, 0.8 L air min⁻¹ in SBR2 for 120 days and 1.2 L air min⁻¹ in SBR1 for 110 days--were tested. When the aeration rate was 0.2 L air min⁻¹, the SBR was continuously anaerobic. When the aeration rate was 0.4 L air min⁻¹, COD and TP removals were 90% but TN removal was only 34%. When the aeration rates were 0.8 and 1.2 L air min⁻¹, average effluent concentrations were 115 mg COD L⁻¹, 19 mg TN L⁻¹ and 0.7 mg TP L⁻¹, giving COD, TN and TP removals of 97%, 95% and 97%, respectively. It was found that partial nitrification followed by denitrification occurred in the intermittently aerated SBR systems.

This study evaluated the effects of abattoir wastewater irrigation on plant growth and development. The soils used in this study were collected from Primo Smallgoods Abattoir (Port Wakefield, South Australia) at different sites such as currently irrigated (CI), currently not irrigated (CNI) and soil outside the irrigation area as control (CTRL). A completely randomised block design was employed for the plant growth experiment, where four crops (Pennisetum purpureum, Medicago sativa, Sinapis alba and Helianthus annuus) were grown separately on three different soils (CI, CNI and CTRL) in plastic pots. Two types of water (tap water and wastewater) and two loadings were applied throughout the planting period based on the field capacity (FC 100 and 150 %). The overall dry matter yield was compared between the soils and treatments. Under wastewater irrigation, among the four species grown in the CI soil, P. purpureum (171 g) and H. annuus (151 g) showed high biomass yields, followed by S. alba (115 g) and M. sativa (31 g). The plants grown under tap water showed about 70 % lower yields compared to the abattoir wastewater irrigation (AWW). Similar trends in the biomass yields were observed for CNI and CTRL soils under the two water treatments, with the biomass yields in the following order CI > CNI > CTRL soils. The results confirm the beneficial effects of AWW at the greenhouse level. However, a proper cropping pattern and wastewater irrigation management plan is essential to utilise the nutrients available in the wastewater-irrigated land treatment sites. The increase in fertility is evident from the effects of wastewater on biomass growth and also the abundance of nutrients accumulated in plants. A mass balance calculation on the applied, residual and the plant-accumulated nutrients over a few cropping periods will help us in understanding the nutrient cycling processes involved in the abattoir-irrigated land treatment sites, which will serve as an effective tool for the environmental management.