Chlordecone was applied between 1972 and 1993 in banana fields of the French West Indies. This resulted in long-term pollution of soils and contamination of waters, aquatic biota, and crops. To assess pollution level and duration according to soil type, WISORCH, a leaching model based on first-order desorption kinetics, was developed and run. Its input parameters are soil organic carbon content (SOC) and SOC/water partitioning coefficient (Koc). It accounts for current chlordecone soil contents and drainage water concentrations. The model was valid for andosol, which indicates that neither physicochemical nor microbial degradation occurred. Dilution by previous deep tillages makes soil scrapping unrealistic.Lixiviation appeared the main way to reduce pollution. Besides the SOC and rainfall increases, Koc increased from nitisol to ferralsol and then andosol while lixiviation efficiency decreased. Consequently, pollution is bound to last for several decades for nitisol, centuries for ferralsol, and half a millennium for andosol.

Determining sources of neurotoxic metals in rural and urban soils is important for mitigating human exposure. Surface soil from four areas with significant clusters of mental retardation and developmental delay (MR/DD) in children, and one control site were analyzed for nine metals and characterized by soil type, climate, ecological region, land use and industrial facilities using readily available GIS-based data. Kriging, principal component analysis (PCA) and cluster analysis (CA) were used to identify commonalities of metal distribution. Three MR/DD areas (one rural and two urban) had similar soil types and significantly higher soil metal concentrations. PCA and CA results suggested that Ba, Be and Mn were consistently from natural sources; Pb and Hg from anthropogenic sources; and As, Cr, Cu, and Ni from both sources. Arsenic had low commonality estimates, was highly associated with a third PCA factor, and had a complex distribution, complicating mitigation strategies to minimize concentrations and exposures. GIS-based data, principal component and cluster analysis identified complex distributions of metals in soils in areas with clusters of mental retardation and developmental delay.

In urban areas, a highly variable mixture of pollutants is deposited as particulate matter. The concentration and bioavailability of individual pollutants within particles need to be characterised to ascertain the risks to ecological receptors. This study, carried out at two urban parks, measured the deposition and water-solubility of metals to four species common to UK urban areas. Foliar Cd, Cr, Cu, Fe, Ni, Pb and Zn concentrations were elevated in at least one species compared with those from a rural control site. Concentrations were, however, only affected by distance to road in nettle and, to a lesser extent, birch leaves. Greater concentrations of metal were observed in these species compared to cypress and maple possibly due to differences in plant morphology and leaf surfaces. Solubility appeared to be linked to the size fraction and, therefore, origin of the metal with those present predominantly in the coarse fraction exhibiting low solubility. High density traffic resulted in elevated metal concentrations on vegetation, which were related to distance from road and plant species.

Hexanitrohexaazaisowurtzitane (CL-20) is an emerging explosive that may replace the currently used explosives such as RDX and HMX, but little is known about its fate in soil. The present study was conducted to determine degradation products of CL-20 in two sandy soils under abiotic and biotic anaerobic conditions. Biotic degradation was prevalent in the slightly acidic VT soil, which contained a greater organic C content, while the slightly alkaline SAC soil favored hydrolysis. CL-20 degradation was accompanied by the formation of formate, glyoxal, nitrite, ammonium, and nitrous oxide. Biotic degradation of CL-20 occurred through the formation of its denitrohydrogenated derivative (m/z 393 Da) while hydrolysis occurred through the formation of a ring cleavage product (m/z 156 Da) that was tentatively identified as CH2N-C(N-NO2)-CHN-CHO or its isomer N(NO2)CH-CHN-CO-CHNH. Due to their chemical specificity, these two intermediates may be considered as markers of in situ attenuation of CL-20 in soil. Two key intermediates of CL-20 degradation are potential markers of its natural attenuation in soil.

Chlordecone was applied between 1972 and 1993 in banana fields of the French West Indies. This resulted in long-term pollution of soils and contamination of waters, aquatic biota, and crops. To assess pollution level and duration according to soil type, WISORCH, a leaching model based on first-order desorption kinetics, was developed and run. Its input parameters are soil organic carbon content (SOC) and SOC/water partitioning coefficient (Koc). It accounts for current chlordecone soil contents and drainage water concentrations. The model was valid for andosol, which indicates that neither physico-chemical nor microbial degradation occurred. Dilution by previous deep tillages makes soil scrapping unrealistic. Lixiviation appeared the main way to reduce pollution. Besides the SOC and rainfall increases, Koc increased from nitisol to ferralsol and then andosol while lixiviation efficiency decreased. Consequently, pollution is bound to last for several decades for nitisol, centuries for ferralsol, and half a millennium for andosol. Soil and water contamination by chlordecone will persist for several centuries in the French West Indies, because the only decontamination is through leaching by drainage water.

To determine background values of the 252 chemical compounds listed in Dutch legislation, a survey was designed with the aim of estimating percentiles of the cumulative frequency distributions and areal fractions exceeding the former, legislative reference values. Sampling locations were selected by probability sampling, so that in estimating the target quantities no model assumptions on the spatial variation were required, and valid estimates could be obtained by design-based inference. Strata in random sampling were formed by overlaying an aggregated soil map and land use map. For most of the heavy metals the areal fraction with concentrations in the topsoil (0-10 cm) exceeding the reference value was smaller than the allowable maximum of 5%. For these compounds a background value was determined smaller than the reference value. Exceptions were V, Co, Ba and Cu, for which a background value was defined (slightly) larger than the reference value. Legislative background values can be best derived by probability sampling and design-based estimation.

Despite numerous reviews suggesting that microbial biosensors could be used in many environmental applications, in reality they have failed to be used for which they were designed. In part this is because most of these sensors perform in an aqueous phase and a buffered medium, which is in contrast to the nature of genuine environmental systems. In this study, a range of non-exhaustive extraction techniques (NEETs) were assessed for (i) compatibility with a naphthalene responsive biosensor and (ii) correlation with naphthalene biodegradation. The NEETs removed a portion of the total soil naphthalene in the order of methanol > HPCD > βCD > water. To place the biosensor performance to NEETs in context, a biodegradation experiment was carried out using historically contaminated soils. By coupling the HPCD extraction with the biosensor, it was possible to assess the fraction of the naphthalene capable of undergoing microbial degradation in soil. Exposure of microbial biosensors to cyclodextrin solutions allows the assessment of the degradable fraction of contaminants in soil.

Detailed soil screening data from the Czech Republic as a typical Central European country are presented here. Determination of a wide selection of organic and inorganic pollutants as well as an assessment of specific soil parameters allowed us to study the soil contamination in relation to the land use and soil properties. While HCHs and HCB were found at highest levels in arable soils, the higher concentrations of PCDDs/Fs, PCBs, PAHs and DDTs were observed in high altitude forest soils. Concentrations of these compounds strongly correlated with the soil organic carbon content. Several possible reasons have been suggested for the observed higher concentrations in mountain forest soils but the impact of each of these influencing factors remains to be identified. An inventory of the soil contamination is needed as a first step in our effort to estimate an extent to which the secondary sources contribute to the enhanced atmospheric levels of POPs. Due to its large retention capacity for hydrophobic compounds, carbon-rich mountain soil showed higher concentrations for several persistent organic pollutants.

Aniline and 2,4,6-trinitrotoluene (TNT) were equilibrated with particulate (POM) and dissolved organic matter (DOM) from an organic soil at different compositions of adsorbed major cations (Na, Al) and pH (aniline: 3.7-5.1, TNT: 4.8-5.0). After separation of POM, concentrations of ¹⁴C-labelled aniline and TNT* (including TNT degradation products) were determined in DOM size fractions using size-exclusion chromatography (SEC) and UV-detection. Concentrations in the <3.5 kDa size fraction were 2.8-6.0 and 8.5-9.5 times higher for aniline and TNT*, respectively, as compared to the >40 kDa fraction. Thus, both aniline and TNT* were preferentially associated to the smallest DOM size fraction. The significant binding to DOM (similar extent as to POM) and the fact that the <3.5 kDa DOM fraction was less susceptible to flocculation by major metals suggests that the mobility of aniline and TNT is highly affected by the solubility of soil organic matter. Concentrations of aniline and TNT associated with dissolved organic matter (DOM) was shown to increase with decreasing apparent molecular mass of DOM.

The oxidative dissolution of mine wastes gives rise to acidic, metal-enriched mine drainage (AMD) and has typically posed an additional risk to the environment. The poly-metallic mine Dabaoshan in South China is an excellent test site to understand the processes affecting the surrounding polluted agricultural fields. Our objectives were firstly to investigate metal ion activity in soil solution, distribution in solid constituents, and spatial distribution in samples, secondly to determine dominant environment factors controlling metal activity in the long-term AMD-polluted subtropical soils. Soil Column Donnan Membrane Technology (SC-DMT) combined with sequential extraction shows that unusually large proportion of the metal ions are present as free ion in the soil solutions. The narrow range of low pH values prevents any pH effects during the binding onto oxides or organic matter. The differences in speciation of the soil solutions may explain the different soil degradation observed between paddy and non-paddy soils. First evidence of the real free metal ion concentrations in acid mine drainage context in tropical systems.