Incidental zinc sulfide nanoparticles (nano-ZnS) are spread on soils through organic waste (OW) recycling. Here we performed soil incubations with synthetic nano-ZnS (3 nm crystallite size), representative of the form found in OW. We used an original set of techniques to reveal the fate of nano-ZnS in two soils with different properties. 68 Zn tracing and nano-DGT were combined during soil incubation to discriminate the available natural Zn from the soil, and the available Zn from the dissolved nano-68 ZnS. This combination was crucial to highlight the dissolution of nano-68 ZnS as of the third day of incubation. Based on the extended X-ray absorption fine structure, we revealed faster dissolution of nano-ZnS in clayey soil (82% within 1 month) than in sandy soil (2% within 1 month). However, the nano-DGT results showed limited availability of Zn released by nano-ZnS dissolution after 1 month in the clayey soil compared with the sandy soil. These results highlighted: (i) the key role of soil properties for nano-ZnS fate, and (ii) fast dissolution of nano-ZnS in clayey soil. Finally, the higher availability of Zn in the sandy soil despite the lower nano-ZnS dissolution rate is counterintuitive. This study demonstrated that, in addition to nanoparticle dissolution, it is also essential to take the availability of released ions into account when studying the fate of nanoparticles in soil.

International audience | Metals are naturally present in freshwater ecosystems but anthropogenic activities like mining operations represent a long-standing concern. Metals released into aquatic environments may affect microbial communities such as periphytic biofilm, which plays a key role as a primary producer in stream ecosystems. Using two 28-day microcosm studies involving two different photoperiods (light/dark cycle of 16/8 vs 8/16), the present study assessed the effects of four increasing nickel (Ni) concentrations (0-6 mu M) on two natural biofilm communities collected at different seasons (summer and winter). The two communities were characterized by different structural profiles and showed significant differences in Ni accumulated content for each treatment. For instance, the biofilm metal content was four times higher in the case of summer biofilm at the highest Ni treatment and after 28 days of exposure. Biomarkers examined targeted both heterotrophic and autotrophic organisms. For heterotrophs, the 8-glucosidase and 8-glucosaminidase showed no marked effects of Ni exposure and were globally similar between the two communities suggesting low toxicity. However, the photosynthetic yield confirmed the toxicity of Ni on autotrophs with maximum inhibition of 81 +/- 7% and 60 +/- 1% respectively for the summer and winter biofilms. Furthermore, biofilms previously exposed to the highest long-term Ni con-centration ([Ni2+] = 6 mu M) revealed no acute effects in subsequent toxicity based on the PSII yield, suggesting a tolerance acquisition by the phototrophic community. Taken together, the results suggest that the biofilm response to Ni exposure was dependent of the function considered and that descriptors such as biofilm metal content could be seasonally dependent, information of great importance in a context of biomonitoring.

The negative impact of microplastics (MPs) act as metals vectors to environment and ecosystem have been paid more and more attention, and the accumulation risk of them to human body through the food chains and food webs needs to attract attention. In addition, the MPs bonded with heavy metals transport from river into the sea with high salinity may also have metals release risk. Herein, natural aged microplastics prepared from artificially broken macroplastics adsorbed with heavy metals accumulated from the natural environment were tested for their states and release risk in several simulated solution (NaCl and gastrointestinal solutions) to understand their effects on environment and human health. The adsorption capacity of different heavy metals on MPs was different during natural aging process proved by four-acid digestion method. Metals with high accumulation (including Pb, As, Cr, Mn, Ni, Zn, Co, Cu and Cd) on NAMPs were selected for further study. Results obtained via three-step extraction method showed that these heavy metals were mainly present as acid-extractable and reducible ions, which were characterized by high bioavailability. Release experiments suggested the notable Mn, Zn, As, Cr, Cu and Ni release in NaCl solution, and significant release of Mn, Zn, As, Cr, Cu, Pb and Ni in gastrointestinal solutions. The high metal release ratio in the simulated gastric solution was attributed to the weak binding of metal ions to NAMPs in acidic environment. This study will play a vital rule in assessing the ecological risks associated with MPs in natural environment.

Serious pollution is caused by heavy metals (HMs) emission during sludge combustion treatment, but the addition of minerals has the ability to alleviate the migration of HMs to the gaseous state. In this study, HMs (As, Cr, Zn and Cu) behavior, speciation, and environmental risk during sludge combustion with CaO and montmorillonite (MMT) additive was investigated in the lab-scale tube furnace. The results showed that the sludge combustion was mainly determined by volatile matter. In general, CaO inhibited the volatilization of Cr, Zn, and Cu, but promoted As volatilization. MMT inhibited the volatilization of HMs, but the effect was not obvious at high temperatures. Besides, the improvement of retention effect was not found for Cr and Cu with the increase of CaO at 1000 °C, there might exist threshold value for CaO on HMs retention process. Meanwhile, CaO increased acid-soluble fraction of As significantly at high temperatures, decreased residual fraction of Cr by oxidation, converted Zn and Cu to residual fraction. MMT increased the acid-soluble fraction of As and residual fraction of Cr. In view of the HMs environmental risk in ash, the combustion temperature of sludge was necessary to control under 1000 °C and minerals additive amount was needed to manage above 1000 °C.

Identifying the bioavailability and release-desorption mechanism of heavy metals (HMs) in soil is critical to understand the release risk of HMs. Simultaneously, the mechanistic investigation of affecting the bioavailability of HMs in soil is necessary, such as the grain-size distribution and soil mineralogy. Herein, the bioavailability of HMs (Cu, Cd, Ni, Pb, and Zn) in different area soils near a typical copper-smelter was evaluated by the sequential extraction technique (BCR), diffusive gradients in thin-films (DGT), and DGT-induced fluxes in sediments (DIFS) model. Results showed that the HMs proportion of the residual fraction in all soils was the highest. The average bioavailability concentration (CDGT) of Cu and Cd in industrial soil was the highest, with 45.12 μg· L⁻¹ and 9.06 μg· L⁻¹. The result of DIFS model revealed that the decreased order of the mean value of desorption rate constant (K₋₁) was Cd > Zn > Ni > Cu > Pb, 5.91 × 10⁻⁵, 4.96 × 10⁻⁵, 2.89 × 10⁻⁵, 9.64 × 10⁻⁶, and 8.69 × 10⁻⁶, respectively. According to the spatial distribution of release potential (R-value), the release potential of labile-Cu in agricultural soil was the highest, which was mainly attributed to fertilizer application in farmland. Simultaneously, the reduced hydroxyl was also related to the agricultural activities, resulting in the weakened adsorption capacity of HMs by soil. Redundancy analysis (RDA) results showed that the bioavailability of Cd, Ni, and Zn was mainly driven by soil pH, while the bioavailability of Cu and Pb was primarily driven by dissolved organic carbon (DOC). Meanwhile, carbonate minerals had a positive correlation with the bioavailability of Cd, Ni, and Zn, which could promote the release of HMs in mining soil as chemical weathering progresses. In conclusion, this study provides a structured method which can be used as a standard approach for similar scenarios to determine the geochemical fractionation, bioavailability, and release kinetics of heavy metals in soils.

Rare earth elements (REE) have become essential in high- and green-technologies. Their increasing use lead to the release of anthropogenic REE into the environment including aquatic systems. The limited data available on the aquatic ecotoxicology of REE indicate their biological effects are highly dependent on their speciation, posing challenges for a reliable environmental risk assessment (ERA). The current study assessed the influence of speciation on the toxicity of neodymium (Nd), gadolinium (Gd) and ytterbium (Yb) in the Daphnia magna mobility inhibition test (ISO 6341:2012). REE toxicity was assessed individually and in ternary mixture, in the absence and presence of dissolved organic matter (DOM). Speciation was predicted by modeling and REE bioaccumulation by D. magna was measured to better understand the relationship between REE speciation and toxicity. DOM decreased significantly the toxicity of Nd, Gd and the mixture towards this freshwater crustacean. This was explained by a lower REE bioaccumulation in the presence of DOM due to REE-DOM complexation, which reduced REE bioavailability. DOM effects on Yb toxicity and bioaccumulation were limited because of Yb precipitation. We show that the way of expressing EC50 values (based on nominal, measured or predicted REE concentrations in solution) drastically changed REE toxicity assessment and that these changes were influenced by REE speciation. This study demonstrates for the first time that REE speciation, and especially REE-DOM complexation, significantly influences REE bioaccumulation and toxicity towards D. magna. Our results have implications for the subsequent ERA of REE.

The purposes of this study were to measure the concentrations of arsenic speciation in shellfish from South China Sea and evaluate the health risk by local residents through shellfish consumption. The median concentrations (in wet weight) of arsenic speciation in shellfish samples were in the following order: AsB (16.0 mg·kg⁻¹) > DMA (1.30 mg·kg⁻¹) > AsV (0.23 mg·kg⁻¹) > AsC (0.08 mg·kg⁻¹) > AsIII (0.05 mg·kg⁻¹) > MMA (0.01 mg·kg⁻¹). Among shellfish species, Mactra mera and Babylonia areolata were found to accumulate iAs and AsB, respectively. The target hazard quotient values of iAs (THQᵢAₛ) in all shellfish samples were lower than 1. However, the carcinogenic risk values of iAs (CRᵢAₛ) in the Mactra mera, Mytilus galloprovincialis and Pinctada margaritifera were beyond the acceptable range, implying that continuous exposure to iAs pollution via the consumption of these shellfish would pose a potential cancer risk to local consumers.