Imperata cylindrica leaf was used as raw material to prepare two different adsorbents through chemical modification by using sulfuric acid and phosphoric acid. These two adsorbents, sulfuric acid-modified I. cylindrica leaf-based adsorbent (SIC) and phosphoric acid-modified I. cylindrica leaf-based adsorbent (PIC), were used to adsorb nickel ions (Ni²⁺) from aqueous solutions. The I. cylindrica leaf-based adsorbent and modified I. cylindrica leaf-based adsorbents were characterized by Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM). Different operational parameters such as initial solution pH, adsorbent size, adsorbent dosage, initial Ni²⁺ ion concentration, and temperature were studied. The adsorption isotherm and the adsorption kinetics were studied systematically. Based on the FT-IR spectrum before and after adsorption of Ni²⁺ ions, the adsorption mechanism involved both ion exchange and complexation between Ni²⁺ ions and functional groups on the surface of adsorbents. There was no sulfur and phosphorus detected in the aqueous solutions after adsorption. Therefore, SIC and PIC are effective in adsorbing Ni²⁺ ions and will not cause secondary pollution to the environment.

Soils polluted by metals and organic compounds are a major challenge in soil remediation and environmental recovery; however, the technology to efficiently decontaminate soils polluted by both metal and organic pollutants does not yet exist. Most of these soils are disposed of in landfills. This study first evaluates chemical reagents (hydrochloric, nitric, sulfuric and lactic acids and ethanol) for leaching metals from soil. Assays were then conducted to evaluate non-ionic, ionic and amphoteric surfactants for pentachlorophenol (PCP) removal by flotation. Finally, a laboratory-scale leaching/flotation process was applied to treat four soil samples polluted with both organic ([PCP]ᵢ = 2.5–30 mg kg⁻¹) and metals ([As]ᵢ = 50–250 mg kg⁻¹, [Cr]ᵢ = 35–220 mg kg⁻¹, [Cu]ᵢ = 80–350 mg kg⁻¹) compounds. The organic compounds and metals are concentrated in the froth and liquid fractions, respectively. Removal yields of 82–93 %, 30–80 %, 79–90 % and 36–78 % were obtained from As, Cr, Cu and PCP, respectively, under optimized process conditions (H₂SO₄ = 1 N, [cocamidopropyl betaine]ᵢ = 1 % (w w⁻¹), t = 60 min, T = 60 °C, PD = 10 % (w v⁻¹)). The treatment of the produced leachate was also tested by chemical precipitation using different reagents.