The carbon dots (C-dots) mediated Sn₂Ta₂O₇/SnO₂ heterostructures with spongy structure were successfully assembled by simple hydrothermal route. The photocatalytic removal efficiency of amoxicillin (AMX, 20 mg L⁻¹) over C-dots/Sn₂Ta₂O₇/SnO₂ was estimated to reach up 88.3% within 120 min simulated solar light irradiating. Meanwhile, the HPLC-MS/MS analysis and density functional theory (DFT) computation were examined to clarify the photo-degradation pathway of AMX. The mechanism investigation proposed that with the modification of C-dots, the photocatalysts improves the utilization of solar energy by harvesting the long wavelength solar light due to their unique up-converted photoluminescence (UCPL). In addition, the porous spongy structure and plenty of tiny C-dots promote the ability of adsorption by enlarged specific surface area. Furthermore, the C-dots mediated Z-type heterojunction of Sn₂Ta₂O₇/SnO₂ facilitates the efficient separation and transfer of photo-induced carriers. Our work affords a promising approach for the design of the high-efficient photocatalysts to remedy poisonous antibiotics in aqueous environment.

Understanding the subsurface transport of perfluorooctanoic acid (PFOA) is of considerable interest for evaluating its potential risks to humans and ecosystems. In this study, packed-column experiments were conducted to examine the influence of surface roughness on PFOA transport in unsaturated glass beads, quartz sand and limestone porous media. Results showed decreasing moisture content significantly increased the air-water interfacial adsorption of PFOA and led to greater retardation in all three types of porous media. Particularly, rougher surface (limestone > quartz sand > glass beads) and smaller grain size (i.e. a larger solid specific surface area, SSSA) significantly enhanced PFOA retardation under unsaturated conditions. These results were further supported by bubble column experiments and SSSA analysis of porous media, which demonstrate that except for the factors affecting PFOA transport in solid-water interface (e.g. surface charge and chemical heterogeneity), the greater retardation of PFOA during transport is attributed to the larger air-water interfacial areas associated with rougher surface and smaller grain size and hence greater interfacial adsorption of PFOA. Our results indicated the importance of surface roughness on the retention and transport of PFOA in the unsaturated zone.

Antibiotics in water and soil are persistent, bioaccumulative and toxic to aquatic organisms and human health. To address it, as one of the new technologies, green synthesized magnetic Fe₃O₄ nanoparticles by Excoecaria cochinchinensis extract used to remove rifampicin (RIF) was investigated in this study. Results showed the adsorption efficiency of RIF reached 98.4% and the maximum adsorption capacity is 84.8 mg/g when 20 mL of RIF at a concentration of 20 M was adsorbed by 10 mg Fe₃O₄ at a temperature of 303 K. The morphology of the green Fe₃O₄ characterized by SEM demonstrated the dimensions ranging from 20 to 30 nm. The N₂ adsorption/desorption isotherms revealed that the surface area of Fe₃O₄ was 111.8 m²/g. In addition, adsorption studies indicated that the kinetics fitted the pseudo second-order and isothermal adsorption conformed to the Langmuir isotherm. Furthermore, due to their magnetic properties, the Fe₃O₄ nanoparticles were easily separated and reused and the mechanism for removing RIF occurred through adsorption rather than chemical redox reaction. Finally, the reusability of Fe₃O₄ for adsorption of RIF showed that the removal efficiency decreased to 61.5% after five cycles.

Fly ash (FA), a solid waste generated in thermal power plants, is considered an environmental pollutant. Therefore, measures must be taken to dispose of FA in an environmentally friendly manner. In this paper, an electrospinning technique was employed to incorporate FA particles onto zinc oxide nanofibers (ZnO NFs), and the product (FA/ZnO composite) was used for the removal of methylene blue (MB) from the water. Herein, ZnO NFs may serve as effective semiconductor photocatalysts and provide sufficient surface area for FA, while the FA particles serve as an effective adsorbent. The adsorption capacity and photocatalytic efficiency of the as-synthesized nanocomposite fibers were enhanced compared to those of the pristine ZnO NFs, and this result is attributed to the uniform distribution of FA on the surface of the ZnO NFs. The as-synthesized nanocomposite could have great significance in wastewater treatment.

This article gives an overview of nanotechnologies applied in remediation of water contaminated by poly- and perfluoroalkyl substances (PFASs). The use of engineered nanomaterials (ENMs) in physical sorption and photochemical reactions offers a promising solution in PFAS removal because of the high surface area and the associated high reactivities of the ENMs. Modification of carbon nanotubes (CNTs) (e.g., oxidation, applying electrochemical assistance) significantly improves their adsorption rate and capacity for PFASs removal and opens a new door for use of CNTs in environmental remediation. Modified nanosized iron oxides with high adsorption capacity and magnetic property have also been demonstrated to be ideal sorbents for PFASs with great recyclability and thus provide an excellent alternative for PFAS removal under various conditions. Literature shows that PFOA, which is one of the most common PFASs detected at contaminated sites, can be effectively decomposed in the presence of either TiO₂-based, Ga₂O₃-based, or In₂O₃-based nano-photocatalysts under UV irradiation. The decomposition abilities and mechanisms of different nano-photocatalysts are reviewed and compared in this paper. Particularly, the nanosized In₂O₃ photocatalysts have the best potential in PFOA decomposition and the decomposition performance is closely related to the specific surface area and the amount of photogenerated holes on the surfaces of In₂O₃ nanostructures. In addition to detailed review of the published studies, future prospects of using nanotechnology for PFAS remediation are also discussed in this article.

The predominance of natural organic matter (NOM) in nonlinear sorption of nonionic organic compounds (NOCs) is a fundamental behavior that controlling the fate, transfer and bioavailability of NOCs in natural environment. There is a debate, i.e., whether the nonlinear sorption is captured by nonlinear partition mechanism or adsorption mechanism. The debate has been going on for decades because characteristics of nonlinear partition are still unknown due to the lack of an adsorbent that can partition NOCs nonlinearly. We find a resin ADS-21, with specific surface area undetectable (<0.5 m² g⁻¹) but high sorption capacity for NOCs (up to 1000 mg g⁻¹ for phenol as an example), is an ideal adsorbent for examining characteristics of nonlinear partitioning. This resin has nonlinear isotherms for phenols and anilines but linear isotherms for polycyclic aromatic hydrocarbons and nitrobenzenes. The observed positively linear relationship of sorption capacities of NOCs with NOCs solubility in water or octanol, could be one of the characteristics of nonlinear partition. Moreover, competitive sorption and no desorption hysteresis could be observed for the nonlinear partition. Hydrogen-bonding of phenols and anilines with ADS-21 is responsible for nonlinear partition, competitive sorption and isotherm nonlinearity. These evidences would be supportive for understanding nonlinear partition and the nonlinear sorption of NOCs by NOM.

Herein, we demonstrate a nanocomposite material Eu/ZnO/pPy for enhanced performance in photoelectrocatalytic degradation of chemical warfare agent sulphur mustard (SM) at ambient conditions which is growing concern of the Scientific Community amidst the current climate of terrorism. Eu/ZnO/pPy was electrochemically prepared on Au electrode at ambient conditions and was used for electrocatalytic reductive elimination of chloride from SM and results indicated one electron involvement process for the cleavage of the carbon-chloride bond. Surface morphology of Eu/pPy, ZnO/pPy and Eu/ZnO/pPy composites were characterized by SEM and confirmed the formation of the nanoparticles and nanorods on the modified electrode which leads to provide more surface area for the reductive elimination reaction. The elemental composition, functional groups and phase of materials on the modified electrode were deduced using EDX, Raman spectroscopy and XRD, respectively. Eu/ZnO/pPy/Au electrode was utilized for the photoelectrocatalytic degradation of SM as it exhibit excellent electrocatalytic activity and degradation products were analyzed by GC-MS. In the reductive elimination of SM, the following parameters were deduced (i) heterogeneous rate constant (0.127 s⁻¹), (ii) transfer coefficient (0.32) and (iii) number of electron involved (1.0). The enhanced photoelectrocatalytic capability of this nanocomposite could serve as a novel and promising catalyst in defence and environmental applications.

Marine polychaetes and fish are known to ingest polystyrene microparticles in the environment. Laboratory microplastic feeding experiments have demonstrated that plastic may release endocrine-disrupting compounds such as diethylhexyl phthalate (DEHP), which can cause adverse effects in both vertebrates and invertebrates. In order to determine the influence of size and digestive conditions on the desorption of DEHP and other plasticizers to polychaetes and fish, we exposed polystyrene particles of various sizes under invertebrate and vertebrate digestive conditions (vertebrate mimic; pepsin, pH = 2.0, 24 °C, invertebrate mimic; Na taurocholate pH = 7, 18 °C). Estrogen receptor activation and concentrations of 12 plasticizers were measured in the extracts. DEHP, bisphenol S and 4-tert-octylphenol were the only compounds detected. Simulated vertebrate gut digestion did not significantly enhance the release of chemicals nor estrogenic activity. However, a 6.3 ± 2.0-fold increase in the concentration of DEHP was observed in extracts from invertebrate gut conditions (Mean ± SD; N = 24, p < 0.0001). Additionally, estimated particle surface area was positively correlated with estrogenic activity across all treatment types (r = 0.85, p < 0.0001). Overall, these data indicate an elevated bioaccessibility of DEHP may occur in invertebrates, and size-dependent desorption of uncharacterized estrogenic compounds from plastic suggest additional complexity when considering the risks of MP to aquatic organisms.

A new carboxylate-functionalized hydrochar (CFHC) was successfully prepared by reaction of hydrochar with maleic anhydride under solvent-free conditions and followed by deprotonating carboxyl group of hydrochar with NaHCO₃ solution. CFHC was characterized using X-ray photoelectron spectroscopy (XPS), elemental analysis (EA), zeta potential, Brunauer-Emmett-Teller surface area (BET) and Fourier-transform infrared spectroscopy (FTIR), and its adsorption properties and mechanisms to methylene blue (MB) and Cd(II) were investigated using the batch method. The isotherm adsorption data were accorded with Langmuir model and the maximum uptakes were 1155.57 and 90.99 mg/g for MB and Cd(II) at the temperature of 303 K, respectively. The joint analysis of batch experiments and characterizations of hydrochar confirmed the π-π interaction was accompanied by electrostatic interaction and hydrogen bond for MB adsorption, while the surface complexation and ion exchange were predominant mechanisms for Cd(II) adsorption. Therefore, a highly effective adsorbent CFHC prepared by a simple and environmentally friendly solid-phase synthesis is a promising candidate for wastewater treatment.

Microplastics exhibit active environmental behavior and unique surface characteristics, and act as carriers for the migration of trivalent arsenic (As(III)) in the environment. Herein, the mechanism by which polytetrafluoroethylene (PTFE) microplastic particles adsorb As(III) is systematically determined. The larger the size of PTFE particles, the smaller the specific surface area, the higher the point of zero charge (PZC), and the more unfavorable adsorption of As(III); the highest adsorption amount can reach 1.05 mg g⁻¹. The adsorption process can be divided into three stages by the intraparticle diffusion model: external mass transfer, intraparticle diffusion, and dynamic equilibrium, of which the external mass transfer stage is the adsorption rate-limiting stage. The Langmuir isotherm model better represented the equilibrium adsorption results. The adsorption of As(III) by PTFE was an exothermic process, and because the increase in temperature broke the hydrogen bond, the amount of adsorption was decreased, which was not conducive to spontaneous adsorption. In the pH range of 3–7, as the pH value increased, the amount of As(III) adsorbed by PTFE gradually decreased, which may be related to the change in PZC for PTFE and the protonation of As(III). The H on the surface hydroxyl group of the PTFE exhibited a very large positive potential (+82.37 kcal mol⁻¹). Thus, it can attract the arsenic oxyanion, and As(III) was subsequently adsorbed on the surface of the PTFE through the hydrogen bond on the hydroxyl group. Electrostatic force and non-covalent interaction were the key mechanisms affecting the PTFE adsorption.