Refine search
Results 41-50 of 1,046
Arsenic removal by perilla leaf biochar in aqueous solutions and groundwater: An integrated spectroscopic and microscopic examination
2018
Niazi, Nabeel Khan | Bibi, Irshad | Shāhid, Muḥammad | Ok, Yong Sik | Burton, Edward D. | Wang, Hailong | Shaheen, Sabry M. | Rinklebe, Jörg | Lüttge, Andreas
In this study, we examined the removal of arsenite (As(III)) and arsenate (As(V)) by perilla leaf-derived biochars produced at 300 and 700 °C (referred as BC300 and BC700) in aqueous environments. Results revealed that the Langmuir isotherm model provided the best fit for As(III) and As(V) sorption, with the sorption affinity following the order: BC700-As(III) > BC700-As(V) > BC300-As(III) > BC300-As(V) (QL = 3.85–11.01 mg g⁻¹). In general, As removal decreased (76–60%) with increasing pH from 7 to 10 except for the BC700-As(III) system, where notably higher As removal (88–90%) occurred at pH from 7 to 9. Surface functional moieties contributed to As sequestration by the biochars examined here. However, significantly higher surface area and aromaticity of BC700 favored a greater As removal compared to BC300, suggesting that surface complexation/precipitation dominated As removal by BC700. Arsenic K-edge X-ray absorption near edge structure (XANES) spectroscopy demonstrated that up to 64% of the added As(V) was reduced to As(III) in BC700- and BC300-As(V) sorption experiments, and in As(III) sorption experiments, partial oxidation of As(III) to As(V) occurred (37–39%). However, XANES spectroscopy was limited to precisely quantify As binding with sulfur species as As2S3-like phase. Both biochars efficiently removed As from natural As-contaminated groundwater (As: 23–190 μg L⁻¹; n = 12) despite in the presence of co-occurring anions (e.g., CO3²⁻, PO4³⁻, SO4²⁻) with the highest levels of As removal observed for BC700 (97–100%). Overall, this study highlights that perilla leaf biochars, notably BC700, possessed the greatest ability to remove As from solution and groundwater (drinking water). Significantly, the integrated spectroscopic techniques advanced our understanding to examine complex redox transformation of As(III)/As(V) with biochar, which are crucial to determine fate of As on biochar in aquatic environments.
Show more [+] Less [-]Assessment of Cu sub-lethal toxicity (LC50) in the cold-water gorgonian Dentomuricea meteor under a deep-sea mining activity scenario
2018
Martins, Inês | Godinho, António | Goulart, Joana | Carreiro-Silva, Marina
Previous aquaria-based experiments have shown dissolution and leaching of metals, especially copper (Cu), from the simulated sediment plumes generated during mining activities resulting in a pronounced increase of Cu contamination in the surrounding seawater. Metals are bioavailable to corals with food, through ingestion (particulate phase) and through tissue-facilitated transport (passive diffusion). With corals being particularly vulnerable to metal contamination, resuspension of metal-bearing sediments during mining activities represents an important ecological threat. This study was undertaken to evaluate the impact of acute copper exposure (LC50;96 h) on the survival of the cold-water octocoral Dentomuricea aff. meteor. The experimental design was divided in two stages. In stage one, a Cu range-finding toxicity test was performed using Cu dilutions in filtered seawater with concentrations of 0 (control); 60; 150; 250; 450; 600 μg/L. Coral mortality was investigated visually based on the percent surface area of tissue changing from natural yellow colour to black colour indicative of tissue necrosis and death. In stage two, we used the results obtained in the range-finding experiment, to define sub-lethal Cu exposure treatments and exposed D. meteor to Cu concentration of 0 (control); 50; 100; 150; 200; 250 μg/L for 96 h. The corals physical conditions were inspected daily and seawater conditions recorded. Corals were considered dead when all of their tissue turned black. The LC50 value was calculated with regression analysis following Probits methodology. Our results indicate that Cu LC50;96 h for the octocoral D. meteor is 137 μg/L.
Show more [+] Less [-]Enhanced heterogeneous Fenton-like systems based on highly dispersed Fe0-Fe2O3 nanoparticles embedded ordered mesoporous carbon composite catalyst
2018
Wang, Jing | Liu, Chao | Qi, Junwen | Li, Jiansheng | Sun, Xiuyun | Shen, Jinyou | Han, Weiqing | Wang, Lianjun
Acceleration of Fe³⁺/Fe²⁺ cycle and simultaneous reduction of particle size with enhanced stability is extremely important for iron-based heterogeneous Fenton catalysts. In this work, Fe⁰-Fe₂O₃ composite nanoparticles embedded ordered mesoporous carbon hybrid materials (Fe⁰-Fe₂O₃/OMC) were rationally designed as efficient heterogeneous Fenton catalysts. Because of the confinement and reduction of OMC, highly dispersed Fe⁰-Fe₂O₃ active species with diameter of ∼8 nm were generated by an optimized carbothermic reduction process. In addition, Fe⁰-Fe₂O₃/OMC possesses ordered mesoporous structure with uniform mesopore, high surface area and pore volume. For comparison, two other catalysts, including solely Fe⁰ nanoparticles supported on ordered mesoporous carbon (Fe⁰/OMC) and solely Fe₂O₃ nanoparticles supported on ordered mesoporous carbon (Fe₂O₃/OMC) were also prepared. The Fenton catalytic performance of synthesized catalysts was evaluated by using H₂O₂ as oxidizing agent to degrade Acid Orange II (AOII). The results show that almost 98.1% of 100 mg L⁻¹ AOII was removed by Fe⁰-Fe₂O₃/OMC in condition of neutral pH and nearly room temperature, which is much higher than those of compared catalysts. The enhanced catalytic activity of Fe⁰-Fe₂O₃/OMC for AOII removal is due to the efficient electron transfer between the Fe⁰ and iron oxide and the accelerated Fe³⁺/Fe²⁺ cycle. The stability and reusability of the catalyst was also investigated, which showed a good performance even after five consecutive runs. The as-synthesized catalyst is proved to be an attractive candidate in heterogeneous Fenton chemistry and practical application.
Show more [+] Less [-]Isolation and characterization of biochar-derived organic matter fractions and their phenanthrene sorption
2018
Jin, Jie | Sun, Ke | Liu, Wei | Li, Shiwei | Peng, Xianqiang | Yang, Yan | Han, Lanfang | Du, Ziwen | Wang, Xiangke
Chemical composition and pollutant sorption of biochar-derived organic matter fractions (BDOMs) are critical for understanding the long-term environmental significance of biochar. Phenanthrene (PHE) sorption by the humic acid-like (HAL) fractions isolated from plant straw- (PLABs) and animal manure-based (ANIBs) biochars, and the residue materials (RES) after HAL extraction was investigated. The HAL fraction comprised approximately 50% of organic carbon (OC) of the original biochars. Results of XPS and 13C NMR demonstrated that the biochar-derived HAL fractions mainly consisted of aromatic clusters substituted by carboxylic groups. The CO2 cumulative surface area of BDOMs excluding PLAB-derived RES fractions was obviously lower than that of corresponding biochars. The sorption nonlinearity of PHE by the fresh biochars was significantly stronger than that of the BDOM fractions, implying that the BDOM fractions were more chemically homogeneous. The BDOMs generally exhibited comparable or higher OC-normalized distribution coefficients (Koc) of PHE than the original biochars. The PHE logKoc values of the fresh biochars correlated negatively with the micropore volumes due to steric hindrance effect. In contrast, a positive relationship between the sorption coefficients (Kd) of BDOMs and the micropore volumes was observed in this study, suggesting that pore filling could dominate PHE sorption by the BDOMs. The positive correlation between the PHE logKoc values of the HAL fractions and the aromatic C contents indicates that PHE sorption by the HAL fractions was regulated by aromatic domains. The findings of this study improve our knowledge of the evolution of biochar properties after application and its potential environmental impacts.
Show more [+] Less [-]Enhanced adsorption of Cu(II) and Cd(II) by phosphoric acid-modified biochars
2017
Peng, Hongbo | Gao, Peng | Chu, Gang | Pan, Bo | Peng, Jinhui | Xing, Baoshan
In this research, adsorption of Cu(II) and Cd(II) by biochars was investigated. To enhance the adsorption of these two metal ions, a simple modification of biochars by phosphoric acid (H(3)PO(4)) was carried out. The surface area was larger and the contents of oxygen-containing functional groups of modified biochars were more than pristine biochars. In comparison with pristine biochar, modified biochars sorbed Cu(II) and Cd(II) much more strongly. Surface area had significant effects on the sorption of Cu(II) and Cd(II) by modified biochars. X-ray photoelectron spectroscopy analyses indicated that the quantities of carboxyl (-COOH) and hydroxyl (-OH) functional groups of modified biochars were larger than those of pristine biochar at the same pyrolysis temperature. Compared with that of pristine biochars, the strong ability of -COOH and -OH of modified biochars to form complexes with Cu(II)/Cd(II) ions resulted in higher adsorption of these two metal ions. The phosphorus-containing groups of modified biochars, such as P=O and P=OOH from the result of Fourier transform infrared spectroscopy, interacted and also formed complexes with metal ions, possibly resulting in the enhanced adsorption of Cu(II) and Cd(II). Thus, sorption of metal ions by modified biochars was controlled by the mechanism of surface complexation between oxygen containing functional groups and metals. In general, the H(3)PO(4) modification was an effective method that prepared biochars with a high affinity for the sorption of heavy metals.
Show more [+] Less [-]Importance of the structure and nanoporosity of organic matter on the desorption kinetics of benzo[a]pyrene in sediments
2017
Huang, Youda | Zhang, Dainan | Duan, Dandan | Yang, Yu | Xiong, Yongqiang | Ran, Yong
The desorption kinetics and mechanism were investigated using a Tenax extraction technique on different sediments spiked with radiocarbon-labeled benzo[a]pyrene (BaP). Five sedimentary fractions were sequentially fractionated, and the only nonhydrolyzable organic carbon fractions (NHC) were characterized using advanced solid-state 13C nuclear magnetic resonance spectroscopy (NMR), improved six end-member model, and a CO2 gas adsorption technique. The sediments contained high percentages of algaenan and/or sporopollenin but low percentages of black carbon and lignin. A first-order, two-compartment kinetics model described the desorption process very well (R2 > 0.990). Although some of the organic carbon fractions were significantly related to the desorption kinetics parameters, the NHC fractions showed the highly significant correlation. Moreover, the nanoporosity or specific surface area (SSA) of the NHC fractions was highly related to their OC contents and aliphatic C (R2 = 0.960, p < 0.01). The multiple regression equations among the desorption kinetics parameters, structural parameters, and nanoporosity were well established (R2=>0.999). Nanoporosity and aromatic C were the dominant contributors. Furthermore, the enhanced percentages of desorbed BaP at elevated temperatures significantly showed a linear regression with the structure and nanoporosity. To our knowledge, the above evidence demonstrates for the first time that the transfer (or diffusion) of BaP in the nanopores of condensed aromatic components is the dominant mechanism of the desorption kinetics of BaP at organic matter particle scale.
Show more [+] Less [-]An environmental index of noise and light pollution at EU by spatial correlation of quiet and unlit areas
2017
Votsi, Nefta-Eleftheria P. | Kallimanis, Athanasios S. | Pantis, Ioannis D.
Quietness exists in places without human induced noise sources and could offer multiple benefits to citizens. Unlit areas are sites free of human intense interference at night time. The aim of this research is to develop an integrated environmental index of noise and light pollution. In order to achieve this goal the spatial pattern of quietness and darkness of Europe was identified, as well as their overlap. The environmental index revealed that the spatial patterns of Quiet and Unlit Areas differ to a great extent highlighting the importance of preserving quietness as well as darkness in EU. The spatial overlap of these two environmental characteristics covers 32.06% of EU surface area, which could be considered a feasible threshold for protection. This diurnal and nocturnal metric of environmental quality accompanied with all direct and indirect benefits to human well-being could indicate a target for environmental protection in the EU policy and practices.
Show more [+] Less [-]Mild acid and alkali treated clay minerals enhance bioremediation of polycyclic aromatic hydrocarbons in long-term contaminated soil: A 14C-tracer study
2017
Biswas, Bhabananda | Sarkar, Binoy | Rusmin, Ruhaida | Naidu, R.
Bioremediation of polycyclic aromatic hydrocarbon (PAH)-contaminated soils requires a higher microbial viability and an increased PAH bioavailability. The clay/modified clay-modulated bacterial degradation could deliver a more efficient removal of PAHs in soils depending on the bioavailability of the compounds. In this study, we modified clay minerals (smectite and palygorskite) with mild acid (HCl) and alkali (NaOH) treatments (0.5–3 M), which increased the surface area and pore volume of the products, and removed the impurities without collapsing the crystalline structure of clay minerals. In soil incubation studies, supplements with the clay products increased bacterial growth in the order: 0.5 M HCl ≥ unmodified ≥0.5 M NaOH ≥3 M NaOH ≥3 M HCl for smectite, and 0.5 M HCl ≥3 M NaOH ≥0.5 M NaOH ≥3 M HCl ≥ unmodified for palygorskite. A14C-tracing study showed that the mild acid/alkali-treated clay products increased the PAH biodegradation (5–8%) in the order of 0.5 M HCl ≥ unmodified > 3 M NaOH ≥ 0.5 M NaOH for smectite, and 0.5 M HCl > 0.5 M NaOH ≥ unmodified ≥ 3 M NaOH for palygorskite. The biodegradation was correlated (r = 0.81) with the bioavailable fraction of PAHs and microbial growth as affected particularly by the 0.5 M HCl and 0.5 M NaOH-treated clay minerals. These results could be pivotal in developing a clay-modulated bioremediation technology for cleaning up PAH-contaminated soils and sediments in the field.
Show more [+] Less [-]Selenite sorption by carbonate substituted apatite
2016
Moore, Robert C. | Rigali, Mark J. | Brady, Patrick
The sorption of selenite, SeO32−, by carbonate substituted hydroxylapatite was investigated using batch kinetic and equilibrium experiments. The carbonate substituted hydroxylapatite was prepared by a precipitation method and characterized by SEM, XRD, FT-IR, TGA, BET and solubility measurements. The material is poorly crystalline, contains approximately 9.4% carbonate by weight and has a surface area of 210.2 m2/g. Uptake of selenite by the carbonated hydroxylapatite was approximately an order of magnitude higher than the uptake by uncarbonated hydroxylapatite reported in the literature. Distribution coefficients, Kd, determined for the carbonated apatite in this work ranged from approximately 4200 to over 14,000 L/kg. A comparison of the results from kinetic experiments performed in this work and literature kinetic data indicates the carbonated apatite synthesized in this study sorbed selenite 23 times faster than uncarbonated hydroxylapatite based on values normalized to the surface area of each material. The results indicate carbonated apatite is a potential candidate for use as a sorbent for pump-and-treat technologies, soil amendments or for use in permeable reactive barriers for the remediation of selenium contaminated sediments and groundwaters.
Show more [+] Less [-]Characterization and phthalate esters sorption of organic matter fractions isolated from soils and sediments
2015
Jin, Jie | Sun, Ke | Wang, Ziying | Han, Lanfang | Pan, Zezhen | Wu, Fengchang | Liu, Xitao | Zhao, Ye | Xing, Baoshan
The sorption of two phthalate esters (PAEs) and phenanthrene (PHE) by different natural organic matter fractions (NOMs) was examined. The surface area of the NOMs correlated positively with the starting decomposition temperature (SDT), implying increased number of micropores with the rise of condensation. Sorption of PHE on nonhydrolyzable carbons (NHCs) and other NOMs was respectively dependent on aromatic and aliphatic C contents. Likely physical blocking of the aliphatic moieties and input of black carbon materials led to elevated sorption capacity for PHE of aromatic domains in the NHCs. Sorption of PAEs by NOMs excluding NHCs was jointly regulated by hydrophobic partitioning and H-bonding interactions. The SDT of the NOMs correlated negatively with the Koc when SDT ≥304 °C, likely because the highly condensed domains may impair the availability of amorphous moieties for sorption. This study highlights the influence of domain accessibility of NOMs on sorption of hydrophobic organic contaminants.
Show more [+] Less [-]