Emission of hazardous trace elements (HTEs) from energy production is receiving much attention due to concerns about the toxicity to the ecosystem and human health. This study presented new field measurement data on the HTEs partitioning behavior and size-segregated elemental compositions of gaseous particular matter (PM) generated from a commercial circulating fluidized bed (CFB) power plant. Mineralogical and morphological characteristics of combustion ash and PM2.5 (particle diameter less than 2.5 μm) were determined by X-ray diffractometer (XRD) and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDS). Functional groups alteration during CFB combustion was characterized by Fourier transform infrared spectroscopy (FTIR). The presence of aliphatic hydrogen at 2910 cm−1 and 2847 cm−1 in the PM2.5 suggested that the aliphatic carbon-rich volatiles were absorbed on the fine particles with large surface area. Fine fly ash (PM2.5) occurred as irregular glass particles or/and as unburned carbon. The typical irregular particles were mainly composed of Al-Si-Ca or Al-Si-Fe phases. The enrichment behavior of HTEs was determined for the airborne size-segregated particular matter. Elemental occurrences, combustion temperature, unburnt carbon, and limestone additives during CFB combustion were critical in the transformation behavior of HTEs. The total potentially mobile pollutants that exit the CFB power plant every year were estimated as follows: 0.22 tons of Cr, 0.12 tons of Co, 0.73 tons of Ni, 0.04 tons of As, 0.07 tons of Se, 3.95 kg of Cd, and 3.34 kg of Sb.

Tools to predict environmental fate processes during remediation of persistent organic pollutants (POPs) in soil are desperately needed since they can elucidate the overall behavior of the chemical and help to improve the remediation process. A dynamic multimedia fate model (SoilPlusVeg) was further developed and improved to account for rhizoremediation processes. The resulting model was used to predict Polychlorinated Biphenyl (PCB) fate in a highly contaminated agricultural field (1089 ng/g d.w.) treated with tall fescue (Festuca arundinacea), a promising plant species for the remediation of contaminated soils. The model simulations allowed to calculate the rhizoremediation time (about 90 years), given the available rhizoremediation half-lives and the levels and fingerprints of the PCB congeners, to reach the legal threshold, to show the relevance of the loss processes from soil (in order of importance: degradation, infiltration, volatilization, etc.) and their dependence on meteorological and environmental dynamics (temperature, rainfall, DOC concentrations). The simulations showed that the effective persistence of PCBs in soil is deeply influenced by the seasonal variability. The model also allowed to evaluate the role of DOC as a possible enhancer of PCB degradation as a microorganism “spoon feeder” of PCBs in the soil solution. Additionally, we preliminary predicted how the contribution of PCB metabolites could modify the PCB fingerprint and their final total concentrations. This shows that the SoilPlusVeg model could be used in selecting the best choices for a sustainable rhizoremediation of a POP contaminated site.

Mass concentrations of chemical compounds in both PM2.5 (particle aerodynamic diameter, Dp < 2.5 μm) and PM2.5-10 (2.5 < Dp < 10 μm), and acidity of aerosol particles were measured at an urban site in western Japan using a continuous dichotomous Aerosol Chemical Speciation Analyzer (ACSA-12) throughout 2014. Mass concentrations of both PM2.5 and sulfate had distinct seasonal variabilities with maxima in spring and winter, mostly due to long-range transport with the prevailing westerly wind. Mass concentration of nitrate in PM2.5 (fNO3) showed an obvious warm-season-low and cold-season-high pattern as a result of both gas-aerosol phase equilibrium processes under high temperature conditions as well as transport. Nitrate in PM2.5-10 (cNO3) increased during long-range transport of dust, implying the great importance of heterogeneous processes at the surface of coarse mode particles. In this study, Δ[H+] (derived from the difference in pH of extract liquid with/without sampling) was used to indicate the acidity of particles. We found that acidity of particles in PM2.5 (fΔH) was mostly positive with a maximum in August because of the large fraction of nitrate and sulfate. Acidity of particles in PM2.5-10 (cΔH) was negative in winter and spring due to presence of alkaline matter from crustal sources. This study highlights the great importance of anthropogenic pollutants on the acidity of particles in the western Pacific Ocean and further impact on the marine environment and climate.

The increasing use of artificial light at night (ALAN) has led to exposure of freshwater ecosystems to light pollution worldwide. Simultaneously, the spectral composition of nocturnal illumination is changing, following the current shift in outdoor lighting technologies from traditional light sources to light emitting diodes (LED). LEDs emit broad-spectrum white light, with a significant amount of photosynthetically active radiation, and typically a high content of blue light that regulates circadian rhythms in many organisms. While effects of the shift to LED have been investigated in nocturnal animals, its impact on primary producers is unknown. We performed three field experiments in a lowland agricultural drainage ditch to assess the impacts of a transition from high-pressure sodium (HPS) to white LED illumination (color temperature 4000 K) on primary producers in periphyton. In all experiments, we compared biomass and pigment composition of periphyton grown under a natural light regime to that of periphyton exposed to nocturnal HPS or, consecutively, LED light of intensities commonly found in urban waters (approximately 20 lux). Periphyton was collected in time series (1–13 weeks). We found no effect of HPS light on periphyton biomass; however, following a shift to LED the biomass decreased up to 62%. Neither light source had a substantial effect on pigment composition. The contrasting effects of the two light sources on biomass may be explained by differences in their spectral composition, and in particular the blue content. Our results suggest that spectral composition of the light source plays a role in determining the impacts of ALAN on periphyton and that the ongoing transition to LED may increase the ecological impacts of artificial lighting on aquatic primary producers. Reduced biomass in the base of the food web can impact ecosystem functions such as productivity and food supply for higher trophic levels in nocturnally-lit ecosystems.

Poor indoor air quality can have adverse effects on human health, especially in susceptible populations; however, few studies have measured multiple pollutants in facilities for susceptible populations at a national scale in South Korea. Therefore, we measured the concentrations of indoor pollutants (fine particulate matter (PM₁₀), CO₂, airborne bacteria (AB), total volatile organic compounds (TVOCs), and formaldehyde) to determine their possible relation to other indoor environmental factors and characteristics of facilities with susceptible populations, such as hospitals, geriatric hospitals, elderly care facilities, and postnatal care centers throughout South Korea. Indoor pollutants were sampled at 82 indoor facilities, including 62 facilities for susceptible populations. Spearman's correlation, Kruskal–Wallis, and Mann–Whitney analyses were used to examine the relationship among and differences between pollutants at indoor facilities and indoor/outdoor differences in PM₁₀ concentration. There were significant correlations between indoor temperature and AB concentration (r = 0.37, p < 0.01), TVOCs, and formaldehyde (r = 0.264, p < 0.01). Indoor PM₁₀ concentrations were higher than outdoor concentrations at all facilities for susceptible populations (p < 0.01). CO₂ might be a good indicator for predicting indoor pollutants when categorized into two levels (≤750 ppm and >750 ppm). The hazard quotient of formaldehyde was higher than the acceptable level of 1 for children under the age of eight in postnatal care centers, indicative of unsafe levels. Therefore, more depth study for exposure characteristics of formaldehyde and indoor air quality (IAQ) in postnatal care facilities as a national scale is needed for finding the children exposure levels.

Recently it has been shown that there are two types of magnetite particles in the human brain, some, which occur naturally and are jagged in appearance, and others that arise from industrial sources, such as coal fired power plants, and are spherical. In order to confirm the latter, the magnetic component of coal ash is first purified and characterized by XRD, showing that it is magnetite with an average particle size of 211 nm. Studies confirm the coal ash magnetic behavior, and that the magnetite is not bound to the other components of coal ash but exist as an isolatable component. SEM studies confirm that in the process of burning coal at very high temperatures for industrial uses, the magnetite formed is spherically shaped, as recent studies of brain tissues of highly exposed urban residents have found. As such, the use of coal for industrial applications such as coking in the production of steel and in power plants is indicated to be a major source of the spherical magnetic combustion-associated magnetite fine particle and nanoparticle environmental pollution. The capacity of these magnetic particles to penetrate and damage the blood-brain-barrier and the early development of Alzheimer's disease hallmarks in exposed populations calls for detail analysis of magnetic fine and nanoparticle distribution across the world.Summation: Industrial coal usage produces spherical magnetic particles and nanoparticles, identical to those associated with neurological disorders.

Passive air samplers (PAS) were evaluated for measuring indoor concentrations of phthalates, novel brominated flame retardants (N-BFRs), polybrominated diphenyl ethers (PBDEs), and organophosphate esters (OPEs). Sampling rates were obtained from a 50-day calibration study for two newly introduced PAS, polydimethylsiloxane (PDMS) or silicone rubber PAS (one with and one without a coating of styrene divinyl benzene co-polymer, XAD) and the commonly used polyurethane foam (PUF) PAS. Average sampling rates normalized to PAS surface area were 1.5 ± 1.1 m³ day⁻¹ dm⁻² for both unsheltered PDMS and XAD-PDMS, and 0.90 m³ ± 0.6 day⁻¹dm⁻² for partially sheltered PUF. These values were derived based on the compound-specific sampling rates measured here and in the literature for the PAS tested, to reasonably account for site-specific variability of sampling rates.PDMS and PUF were co-deployed for three weeks in 51 homes located in Ottawa and Toronto, Canada. Duplicate PUF and PDMS samplers gave concentrations within 10% of each other. PDMS and PUF-derived air concentrations were not statistically different for gas-phase compounds. PUF had a higher detection of particle-phase compounds such as some OPEs. Phthalate and OPE air concentrations were ∼100 times higher than those of N-BFRs and PBDEs. Concentrations were not systematically related to PM₁₀, temperature or relative humidity.We conclude that both PAS provide replicable estimates of indoor concentrations of these targeted semi-volatile organic compounds (SVOCs) over a three-week deployment period. However, PUF is advantageous for collecting a wider range of compounds including those in the particle phase.

Smoking activities were recognized as a main risk factor for population. Indeed, mainstream smoke aerosol is directly inhaled by smokers then delivering harmful compounds in the deepest regions of the lung. In order to reduce the potential risk of smoking, different nicotine delivery products have been recently developed. The latest device released is an electrically heated tobacco system (iQOS®, Philip Morris) which is able to warm the tobacco with no combustion. In the present paper a dimensional and volatility characterization of iQOS-generated particles was performed through particle number concentration and distribution measurements in the mainstream aerosol. The experimental analysis was carried out through a condensation particle counter, a fast mobility particle sizer and a thermo-dilution sampling system allowing aerosol samplings at different temperatures. Estimates of the particle surface area dose received by smokers were also carried out on the basis of measured data and typical smoking patterns.The particle number concentrations in the mainstream aerosols resulted lower than 1 × 108 part. cm−3 with particle number distribution modes of about 100 nm. Nonetheless, the volatility analysis showed the high amount of volatile fraction of iQOS-generated particles, indeed, samplings performed at 300 °C confirmed a significant particle shrinking phenomena (modes of about 20 nm). Anyway, the particle number concentration does not statistically decrease at higher sampling temperatures, then showing that a non-volatile fraction is always presents in the emitted particles. The dose received by smokers in terms of non-volatile amount of particle surface area was equal to 1–2 mm2 per puff, i.e. up to 4-fold larger than that received by electronic cigarette vapers.

A novel mobile laser radar system was used for mapping gaseous atomic mercury (Hg0) atmospheric pollution in the Wanshan district, south of Tongren City, Guizhou Province, China. This area is heavily impacted by legacy mercury from now abandoned mining activities. Differential absorption lidar measurements were supplemented by localized point monitoring using a Lumex RA-915M Zeeman modulation mercury analyzer. Range-resolved concentration measurements in different directions were performed. Concentrations in the lower atmospheric layers often exceeded levels of 100 ng/m3 for March conditions with temperature ranging from 5 °C to 20 °C. A flux measurement of Hg0 over a vertical cross section of 0.12 km2 resulted in about 29 g/h. Vertical lidar sounding at night revealed quickly falling Hg0 concentrations with height. This is the first lidar mapping demonstration in a heavily mercury-polluted area in China, illustrating the lidar potential in complementing point monitors.

Knowledge of adsorption behavior of organic contaminants on high heat temperature treated biochars is essential for application of biochars as adsorbents in wastewater treatment and soil remediation. In this study, isotherms of 25 aromatic compounds adsorption on biochars pyrolyzed at 700 °C from biomass including wood chips, rice straw, bamboo chips, cellulose, lignin and chitin were investigated to establish correlations between adsorption behavior and physicochemical properties of biochars. Isotherms were well fitted by Polanyi theory-based Dubinin-Ashtakhov (DA) model with three parameters, i.e., adsorption capacity (Q⁰) and adsorption affinity (E and b). Besides the negative correlation of Q⁰ with molecular maximum cross-sectional areas (σ) of organic compounds, positive correlations of Q⁰ with total pore volume (Vₜₒₜₐₗ) and average diameter of micropore (D) of biochars were observed, indicating that adsorption by biochars is captured by the pore-filling mechanism with molecular sieving effect in biochar pores. Linear solvation energy relationships (LSERs) of adsorption affinity (E) with solvatochromic parameters of organic compounds (i. e., αₘ and π∗) were established, suggesting that hydrophobic effect, π-π interaction and hydrogen-bonding interaction are the main forces responsible for adsorption. The regression coefficient (π₁) and intercept (C) of obtained LSERs are correlated with biochar H/C and Rₘᵢcᵣₒ, respectively, implying that biochars with higher aromaticity and more micropores have stronger π-π bonding potential and hydrophobic effect potential with aromatic molecule, respectively. However, hydrogen-bonding potential of biochars for organic molecules is not changed significantly with properties of biochars. A negative correlation of b with biochar H/C is also obtained. These correlations could be used to predict the adsorption behavior of organic compounds on high heat temperature treated biochars from various biomass for the application of biochars as sorbents and for the estimating of environmental risks of organic compounds in the present of biochars.