Refine search
Results 1-10 of 106
Microbial engineering for the production and application of phytases to the treatment of the toxic pollutants: A review
2022
Zhou, Yuwen | Anoopkumar, A.N. | Tarafdar, Ayon | Madhavan, Aravind | Binoop, Mohan | Lakshmi, Nair M. | B, Arun K. | Sindhu, Raveendran | Binod, Parameswaran | Sirohi, Ranjna | Pandey, Ashok | Zhang, Zengqiang | Awasthi, Mukesh Kumar
Phytases are a group of digestive enzymes which are commonly used as feed enzymes. These enzymes are used exogenously in the feeds of monogastric animals thereby it improves the digestibility of phosphorous and thus reduces the negative impact of inorganic P excretion on the environment. Even though these enzymes are widely distributed in many life forms, microorganisms are the most preferred and potential source of phytase. Despite the extensive availability of the phytase-producing microbial consortia, only a few microorganisms have been known to be exploited at industrial level. The high costs of the enzyme along with the incapability to survive high temperatures followed by the poor storage stability are noted to be the bottleneck in the commercialization of enzymes. For this reason, besides the conventional fermentation approaches, the applicability of cloning, expression studies and genetic engineering has been implemented for the past few years to accomplish the abovesaid benefits. The site-directed mutagenesis as well as knocking out have also validated their prominent role in microbe-based phytase production with enhanced levels. The present review provides detailed information on recent insights on the modification of phytases through heterologous expression and protein engineering to make thermostable and protease-resistant phytases.
Show more [+] Less [-]Comprehensive evaluation of ionic liquid [Bmim][PF6] for absorbing toluene and acetone
2021
Ma, Xiaoling | Wang, Wenlong | Sun, Chenggong | Sun, Jing
Absorption is an eminent technology for volatile organic compounds (VOCs) elimination with the merits of high efficiency and low cost. Absorbent plays a critical role in the absorption process, and the thermal stability, saturation capacity, and regeneration performance should be concerned. As a kind of green and eco-friendly solvent, ionic liquid (IL) is expected to be a substitute for the conventional VOCs absorbent. In this study, 1-butyl-3-methylimidazolium hexafluorophosphate ([Bmim][PF₆]) is employed to absorb the modeling VOCs (toluene and acetone). Moreover, the used [Bmim][PF₆] is recovered by thermal distillation and the reusability is then conducted by consecutive batch experiments. Based on that, the thermal stability of [Bmim][PF₆] is comprehensively examined, in which the kinetic and thermodynamic parameters are also calculated. Results reveal that [Bmim][PF₆] owned promising toluene absorption performance with inlet concentration of 3000 mg/m³ and flow rate of 300 mL/min at 20 °C, it possesses the saturated adsorption capacity of 5.16 mg/g. [Bmim][PF₆] also shows satisfying thermal stability up to 610 K. In addition, thermal distillation is proved to be a reliable regeneration route on account of the recovered [Bmim][PF₆] remained satisfying capacity even after five cycles.
Show more [+] Less [-]Synthesis and performance evaluation of plastic waste aerogel as sustainable and reusable oil absorbent
2021
Pawar, Atul A. | Kim, Ayoung | Kim, Hern
Direct utilization of waste polyethylene terephthalate (PET) from the environment to form highly porous aerogel technology for oil absorption is an attractive approach from the view point of green chemistry. However, the oil absorption reaction is limited by low oil absorption capacity and less stability. For now, silica aerogel are used to solve these problem. Our goal is to substitute to these silica aerogel with PET aerogel technology. Herein, we have prepared an environmental waste PET based aerogel with 1.0:0.5 wt% PET, polyvinyl alcohol (PVA), and glutaraldehyde (GA) 0.2% v/v were dispersed in 10 mL DI water, followed by homogenization (30 min), sonication (10 min), and ageing (2 h) at 70 °C. To escape macroscopic cracking, cooling (8 h) at 4 °C was followed by freezing (6 h), freeze drying at −80 °C, and 5 mTorr for 18 h. The hybrid PET aerogel displays excellent performance towards oil absorption. Notably it showed high absorption capacity towards the different oils about 21–40 times its own weight, depending on the viscosity and density of the oil and solvents within 15–35 s, 25 °C, and 2 × 2 cm aerogel size. In addition, the aerogel shows there is no change in structure after several recycles due to high mechanical strength. Furthermore, because of the PET aerogel's high porosity (99.74%) and low density (0.0311 g/cm³), close bonding between PET-PVA occurs. Therefore, aerogel shows hydrophobic nature, good mechanical strength, high thermal stability, arrangement of the interconnected fibrillar pore network offers a high surface to volume ratio, low surface energy, high surface roughness, and more reusability. All these parameters are responsible for high oil absorption.
Show more [+] Less [-]Sustainable functionalized metal-organic framework NH2-MIL-101(Al) for CO2 separation under cryogenic conditions
2021
Bābar, Muḥammad | Mubashir, Muhammad | Mukhtar, Ahmad | Saqib, Sidra | Ullah, Sami | Bustam, Mohamad Azmi | Show, Pau Loke
In this study, a sustainable NH₂-MIL-101(Al) is synthesized and subjected to characterization for cryogenic CO₂ adsorption, isotherms, and thermodynamic study. The morphology revealed a highly porous surface. The XRD showed that NH₂-MIL-101(Al) was crystalline. The NH₂-MIL-101(Al) decomposes at a temperature (>500 °C) indicating excellent thermal stability. The BET investigation revealed the specific surface area of 2530 m²/g and the pore volume of 1.32 cm³/g. The CO₂ adsorption capacity was found to be 9.55 wt% to 2.31 wt% within the investigated temperature range. The isotherms revealed the availability of adsorption sites with favorable adsorption at lower temperatures indicating the thermodynamically controlled process. The thermodynamics showed that the process is non-spontaneous, endothermic, with fewer disorders, chemisorption. Finally, the breakthrough time of NH₂-MIL-101(Al) is 31.25% more than spherical glass beads. The CO₂ captured by the particles was 2.29 kg m⁻³. The CO₂ capture using glass packing was 121% less than NH₂-MIL-101(Al) under similar conditions of temperature and pressure.
Show more [+] Less [-]Influence of aqueous extracts of urban airborne particulate matter on the structure and function of human serum albumin
2020
Mazuryk, Olga | Gajda-Morszewski, Przemysław | Flejszar, Monika | Łabuz, Przemysław | Eldik, Rudi van | Stochel, Grazyna | Brindell, Małgorzata
Human exposure to particulate matter (PM) originating from air pollution is inevitable since more and more population is present in large cities that are characterized by poor air quality. The impact on human health is evident and we need to intensify research regarding this problem to get molecular insight into versatile effects of chronic exposure to PM inducing organism responses and initiating the development of selected disorders. Herein, the impact of standard PM representing urban pollution on the structure and function of human serum albumin (HSA) was evaluated by the application of various analytical techniques. HSA was selected due to its high likeliness of being exposed to PM because of the abundance of this protein in blood. The studies were focused mainly on the inorganic residue of PM resulting from removing organic components by a low-temperature plasma. To mimic physiological conditions, dialysis technique was used to simulate the release of nanoparticles and ions from PM to aqueous environment under, which in turn may interact with biomolecules inside the living system. Capture of metals from the bulk suspension was found for many metals like Al, Fe, Zn and Pb in quantities of more than 1 mol of metal ions per mole of HSA. No significant structural changes of the protein upon dialysis with PM were observed, however, an increase in the thermal stabilization of the HSA structure was observed. Moreover, the interaction of HSA dialyzed in the presence of PM with selected drugs (warfarin, aspirin) was negatively affected, indicating a lower affinity of drugs towards the protein, even though only small conformational changes of the PM exposed protein were observed. Our findings point to a possible interference of air pollutants with the drugs taken by patients living in highly polluted areas.
Show more [+] Less [-]Exploring atmospheric stagnation during a severe particulate matter air pollution episode over complex terrain in Santiago, Chile
2019
Toro A, Richard | Kvakić, Marko | Klaić, Zvjezdana B. | Koračin, Darko | Morales S, Raúl G.E. | Leiva G, Manuel A.
A severe air quality degradation event occurred in the Santiago Metropolitan Area (SMA), Chile, in June 2014. Meteorological and air quality measurements from 11 stations in the area as well as numerical simulations using the Weather and Research Forecasting (WRF) model were used to explain the main reasons for the occurrence of elevated particulate matter (PM) concentrations. The conditions were characterized with formation of a coastal low in central Chile between the southeastern anticyclone and a high-pressure system over Argentina. At a local scale, these conditions generated a depression at the base of the inversion layer, an increase in the vertical thermal stability, lower humidity and low-wind conditions, which were conducive to a decrease in pollutant dispersion and insufficient ventilation of the polluted air. Measurements and simulations using the WRF model revealed a vertical structure of the boundary layer during these stagnant conditions and provided a basis for a trajectory analysis. The back-trajectory calculation showed that the transport of air parcels was contained in the valley during the highest concentrations. The analysis also enabled the definition of the threshold values of a simple indicator of air pollution (ventilation coefficient, VC), which confirmed the evolution of the episode and divided the observed daily concentrations into two groups, with one including values above the limits prescribed by the national air quality standards (NAQS) and the other including values below these limits. For the SMA, the daily PM concentrations above the NASQ limits were associated with an overall mean threshold value of VC below 500 m² s⁻¹ (for PM₂.₅) and 300 m² s⁻¹ (for PM₁₀). To apply the VC analysis to other pollutants and different geographic locations, different threshold values should be evaluated.
Show more [+] Less [-]A biocide delivery system composed of nanosilica loaded with neem oil is effective in reducing plant toxicity of this biocide
2022
Goetten de Lima, Gabriel | Wilke Sivek, Tainá | Matos, Mailson | Lundgren Thá, Emanoela | de Oliveira, Ketelen Michele Guilherme | Rodrigues de Souza, Irisdoris | de Morais de Lima, Tielidy Angelina | Cestari, Marta Margarete | Esteves Magalhães, Washington Luiz | Hansel, Fabrício Augusto | Morais Leme, Daniela
One possible way to reduce the environmental impacts of pesticides is by nanostructuring biocides in nanocarriers because this promotes high and localized biocidal activity and can avoid toxicity to non-target organisms. Neem oil (NO) is a natural pesticide with toxicity concerns to plants, fish, and other organisms. Thus, loading NO in a safe nanocarrier can contribute to minimizing its toxicity. For this study, we have characterized the integrity of a nanosilica-neem oil-based biocide delivery system (SiO₂NP#NO BDS) and evaluated its effectiveness in reducing NO toxicity by the Allium cepa test. NO, mainly consisted of unsaturated fatty acids, was well binded to the SiO₂NP with BTCA crosslinker. Overall, this material presented all of its pores filled with the NO with fatty acid groups at both the surface and bulk level of the nanoparticle. The thermal stability of NO was enhanced after synthesis, and the NO was released as zero-order model with a total of 20 days without burst release. The SiO₂NP#NO BDS was effective in reducing the individual toxicity of NO to the plant system. NO in single form inhibited the seed germination of A. cepa (EC₅₀ of 0.38 g L⁻¹), and the effect was no longer observed at the BDS condition. Contrarily to the literature, the tested NO did not present cyto- and geno-toxic effects in A. cepa, which may relate to the concentration level and composition.
Show more [+] Less [-]Metolachlor adsorption using walnut shell biochar modified by soil minerals
2022
Liu, Lu | Li, Xiaohan | Wang, Xiaorou | Wang, Yuxin | Shao, Ziyi | Liu, Xiao | Shan, Dexin | Liu, Zhihua | Dai, Yingjie
The removal of pesticide residues in soil is a research hotspot. The metolachlor (MET) adsorption by walnut shell biochar (BC) modified with montmorillonite (MBC), illite (IBC), and kaolinite (KBC), as well as the original BC (OBC) was investigated. The characteristics of samples were studied by scanning electron microscopy and mapping analysis, Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetry, and chemical stability analysis. The effects of the dosage, ionic strength, and pH, and determined the adsorption kinetics and isotherms for MET with the BCs were analyzed. In addition, response surface methodology regression model analysis was conducted and the adsorption mechanisms were investigated. The results showed that the thermal stability and chemical stability of MBC, IBC, and KBC were higher than those of OBC, and MBC had the greatest stability. The MET adsorption rates of OBC, MBC, IBC, and KBC were 62.15%, 92.47%, 87.97%, and 83.31%, respectively. The kinetic fitting results and adsorption mechanisms showed that the modification of BC with minerals enhanced the physical adsorption of MET. The maximum MET adsorption capacities by OBC, MBC, IBC, and KBC were 39.68 mg g⁻¹, 68.49 mg g⁻¹, 65.79 mg g⁻¹, and 65.36 mg g⁻¹, respectively. Hydrogen bonds, π–π bonds, coordination bonds, and hydrophobic interactions were the key adsorption mechanisms. Therefore, the mineral-modified BCs were characterized by high adsorption rates and stability. This approach can make BC more efficient, with higher performance as a low cost soil amendment.
Show more [+] Less [-]Polybrominated diphenyl ether quinone exposure leads to ROS-driven lysosomal damage, mitochondrial dysfunction and NLRP3 inflammasome activation
2022
Yang, Bingwei | Wang, Yuting | Fang, Changyu | Song, Erqun | Song, Yang
Polybrominated diphenyl ethers (PBDEs) are aromatic compounds that containing bromine atoms, which possess high efficiency, good thermal stability. However, PBDEs had various known toxic effects and were characterized as persistent environmental pollutants. Exposure to a quinone-type metabolite of PBDEs (PBDEQ) is linked with excess production of intracellular reactive oxygen species (ROS) in our previous studies. Here, we observed that PBDEQ exposure led to ROS and mitochondrial dysfunction, which promoted canonical and non-canonical Nod-like receptor protein 3 (NLRP3) inflammasome activation. Further experiments demonstrated that PBDEQ exposure activated Toll-like receptors (TLRs), subsequently regulating nuclear factor kappa B (NF-κB) signaling. Moreover, lysosomal damage and K⁺ efflux were involved in PBDEQ-driven NLRP3 inflammasome activation. Our in vivo study also illustrated that PBDEQ administration induced liver inflammation in male C57BL/6J mice. Cumulatively, our current finding provided novel insights into PBDEQ-induced pro-inflammatory responses.
Show more [+] Less [-]The behavior of organic sulfur species in fuel during chemical looping gasification
2022
Wang, Lulu | Shen, Laihong | Long, Yuyang | Shen, Dongsheng | Jiang, Shouxi
Uncoupling chemical looping gasification (CLG), the organic sulfur evolution was simulated and explored qualitatively and quantitatively using typical sulfur compounds on TG-MS and temperature-programmed fixed bed. The HS radical in the reductive atmosphere easier converted to H₂S and COS. H₂O activated the evolution of S which was stably bonded to carbon, and H₂ generated from gasification and oxidation of reductive Fe by H₂O contributed to the release of sulfur. The proportion of H₂S released from sulfur compounds was greater than 87% in steam gasification, and more than 60% during CLG. Oxygen carriers promoted the conversion of sulfur to SO₂ in the mid-temperature region (500 °C–700 °C), and H₂S in the high temperature region (700 °C–900 °C). Sulfur species played a pivotal role in sulfur evolution at low temperature of CLG. The organic sulfur in mercaptan and benzyl were more easily converted and escaped than in thiophene and phenyl. The thermal stability of sulfur species, the presence of steam and OC affected the initial temperature and peak concentration of gas sulfur release as well as sulfur distribution. Consequently, CLG strengthened the sulfur evolution, and made it possible to targeted restructure the distribution of sulfur by regulating process parameters, or blending fuel with different sulfur species for emission reduction, and selective conversion of sulfur.
Show more [+] Less [-]