The present study aims to determine the associations of multiple plasma metal levels and plasma microRNAs (miRNAs) with diabetes risk, and further explore the mediating effects of plasma miRNAs on the associations of plasma metal with diabetes risk. We detected plasma levels of 23 metals by inductively coupled plasma mass spectrometry (ICP-MS) among 94 newly diagnosed and untreated diabetic cases and 94 healthy controls. The plasma miRNAs were examined by microRNA Array screening and Taqman real-time PCR validation among the same study population. The multivariate logistic regression models were employed to explore the associations of plasma metal and miRNAs levels with diabetes risk. Generalized linear regression models were utilized to investigate the relationships between plasma metal and plasma miRNAs, and mediation analysis was used to assess the mediating effects of plasma miRNAs on the relationships between plasma metals and diabetes risk. Plasma aluminum (Al), titanium (Ti), copper (Cu), zinc (Zn), selenium (Se), rubidium (Rb), strontium (Sr), barium (Ba), and Thallium (Tl) levels were correlated with elevated diabetic risk while molybdenum (Mo) with decreased diabetic risk (P < 0.05 after FDR multiple correction). MiR-122–5p and miR-3141 were positively associated with diabetes risk (all P < 0.05). Ti, Cu, and Zn were positively correlated with miR-122–5p (P = 0.001, 0.028 and 0.004 respectively). Ti, Cu, and Se were positively correlated with miR-3141 (P = 0.003, 0.015, and 0.031 respectively). In addition, Zn was positively correlated with miR-193b-3p (P = 0.002). Ti was negatively correlated with miR-26b-3p (P = 0.016), while Mo and miR-26b-3p were positively correlated (P = 0.042). In the mediation analysis, miR-122–5p mediated 48.0% of the association between Ti and diabetes risk. The biological mechanisms of the association are needed to be explored in further studies.

Synthetic azo dyes are extensively used in the textile industries, which are being released as textile effluent into the environment presence of azo dyes in the environment is great environmental concern therefore treatment of textile effluent is crucial for proper release of the effluent into the environment. Electrochemical oxidation (EO) is extensively used in the degradation of pollutants because of its high efficiency. In this study, photo-assisted electrooxidation (PEO) followed by biodegradation of the textile effluent was evaluated. The pretreatment of textile effluent was conducted by EO and PEO in a tubular flow cell with TiO₂–Ti/IrO₂–RuO₂ anode and titanium cathode under different current densities (10, 15, and 20 mA cm⁻²). The chemical oxygen demand level reduced from 3150 mg L⁻¹ to 1300 and 600 mg L⁻¹under EO and PEO, respectively. Furthermore, biodegradation of EO and PEO pretreated textile effluent shows reduction in chemical oxygen demand (COD) from 1300 mg L⁻¹ to 900 mg L⁻¹and 600 mg L⁻¹to 110 mg L⁻¹, respectively. The most abundant genera were identified as Acetobacter, Achromobacter, Acidaminococcus, Actinomyces, and Acetomicrobium from the textile effluent. This study suggests that an integrated approach of PEO and subsequent biodegradation might be an effective and eco-friendly method for the degradation of textile effluent.

The North Sea and its coastal zones are heavily impacted by anthropogenic activities, which has resulted in significant chemical pollution ever since the beginning of the industrialization in Europe during the 19th century. In order to assess the chemical Anthropocene, natural archives, such as sediment cores, can serve as a valuable data source to reconstruct historical emission trends and to verify the effectiveness of changing environmental legislation. In this study, we investigated 90 contaminants covering inorganic and organic pollutant groups analyzed in a set of sediment cores taken in the North Seas' main sedimentation area (Skagerrak). We thereby develop a chemical pollution fingerprint that records the constant input of pollutants over time and illustrates their continued great relevance for the present. Additionally, samples were radiometrically dated and PAH and PCB levels in porewater were determined using equilibrium passive sampling. Furthermore, we elucidated the origin of lead (Pb) contamination utilizing non-traditional stable isotopic analysis. Our results reveal three main findings: 1. for all organic contaminant groups covered (PAHs, OCPs, PCBs, PBDEs and PFASs) as well as the elements lead (Pb) and titanium (Ti), determined concentrations decreased towards more recent deposited sediment. These decreasing trends could be linked to the time of introductions of restrictions and bans and therefor our results confirm, amongst possible other factors, the effectiveness of environmental legislation by revealing a successive change in contamination levels over the decades. 2. concentration trends for ΣPAH and ΣPCB measured in porewater correspond well with the ones found in sediment which suggests that this method can be a useful expansion to traditional bulk sediment analysis to determine the biologically available pollutant fraction. 3. Arsenic (As) concentrations were higher in younger sediment layers, potentially caused by emissions of corroded warfare material disposed in the study area after WW II.

Sediment records are widely used to infer impact of atmospheric metal deposition in alpine lakes, however, the legacy effect and catchment erosion of historical pollutants could potentially affect metal influx into lakes. Here, we collect data (including six trace metals and three lithogenic elements) from well-dated sediment cores of seven alpine lakes in southeast Tibet, which is adjacent to southwest China. This area has a documented history of preindustrial pollution. Metals such as cadmium (Cd), zinc (Zn) and arsenic (As) are found at relatively low concentrations until a clear increase is observed after 1950s across lakes. This result is consistent with accelerating atmospheric metal deposition due to socio-economic development in the region. We observe no synchronous trend across lakes in the changes of lead (Pb), copper (Cu) and silver (Ag), which show no significant increase after ∼1950 over the last two centuries in most of the study lakes. The historical trends of ²⁰⁶Pb/²⁰⁷Pb ratio reflect an important source of anthropogenic Pb associated with preindustrial mining and smelting in this study region, suggesting a substantial impact of legacy contamination from ancient mines. Furthermore, the temporal variations in these six anthropogenic metals are largely accounted for by terrigenous elements (e.g. aluminum (Al) and titanium (Ti)) in most of the study lakes, and to a lesser degree by sediment grain sizes and organic matter content, suggesting a significant role of catchment erosion in modulating sediment metal signals. In all, this study highlights the legacy effect of historical pollutants may have enhanced the forcing of catchment erosion in modulating the sediment signals of anthropogenic deposition in southeast Tibet.

The N-TiO2/g-C3N4@diatomite (NTCD) composite has been prepared through a simple impregnation method, using titanium tetrachloride as precursor and urea as nitrogen-carbon source. Then the effects of calcination temperature on structure, surface property and photocatalytic activity of the catalysts were investigated. And XRD, TEM, XPS, FTIR and UV–vis diffuse adsorption spectroscopy were used to characterize the obtained powders. The photocatalytic activity of the NTCD was evaluated through the reduction of aqueous Cr (VI) under visible light irradiation (λ > 400 nm). The results demonstrated that the nano-TiO2 particles ranging from 15 to 30 nm in the crystal of anatase are well deposited on the surface of diatomite in the NTCD-500 which calcined at 500 °C for 2 h. Furthermore, the g-C3N4 with the lay thickness of 0.92 nm was attached to the surface of nano-TiO2. The N-doped TiO2 and g-C3N4 doped catalysts could co-enhance response in the visible light region and reduce band gap of NTCD-500 (Eg = 3.07 eV). And the NTCD-500 sample exhibited nearly 100% removal rate within 5 h for photocatalytic reduction of Cr (VI) which was higher activity than P25, crude TiO2@diatomite and g-C3N4@diatomite.

The long-term associations between multiple metals and incident diabetes are uncertain. We aimed to examine the relationship between plasma concentrations of 23 metals and the incidence of type 2 diabetes among Chinese senior adults. We quantified fasting plasma concentrations of 23 metals by inductively coupled plasma mass spectrometry among 1039 incident diabetes cases and 1039 controls (age and sex matched) nested in a prospective study, the Dongfeng-Tongji cohort. Both cases and controls were free of diabetes at baseline (2008–2010), incident diabetes were identified using the following criteria: fasting glucose ≥ 7.0 mmoL/l; or hemoglobin A1c (HbA1c) ≥ 6.5%; or self-reported physician diagnosis of diabetes or use of anti-diabetic medication during the follow-up visits in 2013. In the conditional logistic regression models, the multivariable adjusted ORs (95% CIs) of diabetes across quartiles (Q1–Q4) of metal concentrations were as follows: titanium, 1.00, 0.92, 1.31, 1.38 (1.00–1.91, Ptrend = 0.011); selenium, 1.00, 1.08, 1.45, 1.27 (0.93–1.74, Ptrend = 0.05); and antimony, 1.00, 0.79, 0.77, 0.60 (0.44–0.83, Ptrend = 0.002). Arsenic was significantly associated with diabetes in the crude model (ORs comparing extreme quartiles 1.30; 1.02–1.65; Ptrend = 0.006), but was not significant after adjustment for socio-demographic factors. No significant associations were found for other metals. In conclusion, titanium and selenium were positively while antimony was negatively associated with incident diabetes.

In this work, studies using samples collected in an urban area of Aracaju city, Sergipe State, Northeast, Brazil revealed that soil dust in suspension was the main source of total airborne particulate matter (TAPM), followed by vehicular pollution. The concentration profiles for Cu, Fe, Mn, Ni, V and Ti were established for the collected TAPM samples. The concentrations of SO2 and smoke were also measured all along the 42 sampling days. Through multivariate data analysis of the results a correlation between Fe, Mn, Ni and Ti in the mineral composition of the particles was established, indicating soil dust in suspension as the main source of TAPM. The concentrations of Cu and smoke were found to be related to vehicular traffic, and the second largest source of TAPM. Enrichment factors (EF) were calculated for the studied elements, and only Cu was found to be enriched. The concentrations of the elements in TAPM were evaluated using the geoaccumulation index (Igeo), and Fe, Mn, Ni, V and Ti were found to derive from natural sources, in TAPM. However, approximately 55% of the samples did not presented Cu contamination (Igeo≤0), and the remaining 45% presented Cu concentrations levels that indicated between low to moderate (0<Igeo≤1) and moderate to heavy contamination (2<Igeo≤3) in the urban area of Aracaju city, Sergipe State, Northeast, Brazil.

We investigated the environmental fate and bioaccumulation of TiO2 nanomaterials in a simplified paddy microcosm over a period of 17 days. Two types of TiO2 nanomaterials, nanoparticles (TiO2-NP) and nanotubes (TiO2-NT), were synthesized to have a negative surface charge. Ti concentrations in the environmental media (water, soil), crops (quillworts, water dropworts), and some lower and higher trophic organisms (biofilms, algae, plant-parasitic nematodes, white butterfly larva, mud snail, ricefish) were quantified after exposure periods of 0, 7, and 17 days. The titanium levels of the two nanomaterials were the highest in biofilms during the exposure periods. Bioaccumulation factors indicated that TiO2-NP and TiO2-NT were largely transferred from a prey (e.g., biofilm, water dropwort) to its consumer (e.g., nematodes, mud snail). Considering the potential entries of such TiO2 nanomaterials in organisms, their bioaccumulation throughout the food chain should be regarded with great concern in terms of the overall health of the ecosystem.

The increasing production of nanomaterials will in turn increase the release of nanosized byproducts to the environment. The aim of this study was to evaluate the behaviour, uptake and ecotoxicity of TiO₂ byproducts in the earthworm Eisenia fetida. Worms were exposed to suspensions containing 0.1, 1 and 10 mg/L of byproducts for 24 h. Size of TiO₂ byproducts showed aggregation of particles up to 700 μm with laser diffraction. Only worms exposed at 10 mg/L showed bioaccumulation of titanium (ICP-AES), increasing expression of metallothionein and superoxide dismutase mRNA (Real-time PCR) and induction of apoptotic activity (Apostain and TUNEL). TiO₂ byproducts did not induce cytotoxicity on cœlomocytes, but a significant decrease of phagocytosis was observed starting from 0.1 mg/L. In conclusion, bioaccumulation of byproducts and their production of reactive oxygen species could be responsible for the alteration of the antioxidant system in worms.

Limited information is available on the environmental behavior and associated potential risk of manufactured oxide nanoparticles (NPs). In this research, toxicity of nanoparticulate and bulk ZnO, Al2O3 and TiO2 were examined to the nematode Caenorhabditis elegans with Escherichia coli as a food source. Parallel experiments with dissolved metal ions from NPs were also conducted. The 24-h median lethal concentration (LC50) and sublethal endpoints were assessed. Both NPs and their bulk counterparts were toxic, inhibiting growth and especially the reproductive capability of the nematode. The 24-h LC50 for ZnO NPs (2.3 mg L-1) and bulk ZnO was not significantly different, but significantly different between Al2O3 NPs (82 mg L-1) and bulk Al2O3 (153 mg L-1), and between TiO2 NPs (80 mg L-1) and bulk TiO2 (136 mg L-1). Oxide solubility influenced the toxicity of ZnO and Al2O3 NPs, but nanoparticle-dependent toxicity was indeed observed for the investigated NPs. ZnO, Al2O3 and TiO2 nanoparticles are more toxic than their bulk counterparts to the nematode, Caenorhabditis elegans.