Refine search
Results 1-10 of 72
In situ catalytic reforming of plastic pyrolysis vapors using MSW incineration ashes
2021
Ahamed, Ashiq | Liang, Lili | Chan, Wei Ping | Tan, Preston Choon Kiat | Yip, Nicklaus Tze Xuan | Bobacka, Johan | Veksha, Andrei | Yin, Ke | Lisak, Grzegorz
The valorization of municipal solid waste incineration bottom and fly ashes (IBA and IFA) as catalysts for thermochemical plastic treatment was investigated. As-received, calcined, and Ni-loaded ashes prepared via hydrothermal synthesis were used as low-cost waste-derived catalysts for in-line upgrading of volatile products from plastic pyrolysis. It was found that both IBA and air pollution control IFA (APC) promote selective production of BTEX compounds (i.e., benzene, toluene, ethylbenzene, and xylenes) without significantly affecting the formation of other gaseous and liquid species. There was insignificant change in the product distribution when electrostatic precipitator IFA (ESP) was used, probably due to the lack of active catalytic species. Calcined APC (C-APC) demonstrated further improvement in the BTEX yield that suggested the potential to enhance the catalytic properties of ashes through pre-treatment. By comparing with the leaching limit values stated in the European Council Decision, 2003/33/EC for the acceptance of hazardous waste at landfills, all the ashes applied remained in the same category after the calcination and pyrolysis processes, except the leaching of Cl⁻ from the ESP, which was around the borderline. Therefore, the use of ashes in catalytic reforming application do not significantly deteriorate their metal leaching behavior. Considering its superior catalytic activity towards BTEX formation, C-APC was loaded with Ni at 15 and 30 wt%. The Ni-loading favored an increase in overall oil yield, while reducing the gas yield when compared to the benchmark Ni loaded ZSM catalyst. However, Ni addition also caused the formation of more heavier hydrocarbons (C20–C35) that would require post-treatment to recover favorable products like BTEX.
Show more [+] Less [-]Plastic smoke aerosol: Nano-sized particle distribution, absorption/fluorescent properties, dysregulation of oxidative processes and synaptic transmission in rat brain nerve terminals
2020
Borysov, Arsenii | Tarasenko, Alla | Krisanova, Natalia | Pozdnyakova, Natalia | Pastukhov, Artem | Dudarenko, Marina | Paliienko, Konstantin | Borisova, Tatiana
Smoke from plastic waste incineration in an open air travels worldwide and is a major source of air pollution particulate matter (PM) that is very withstand to degradation and hazard to human health. Suspension of smoke aerosol components in water occurs during rains and fire extinguishing. Here, water-suspended plastic smoke aerosol (WPS) preparations suitable for biotesting were synthesized. It has been revealed using dynamic light scattering that WPS contained major nano-sized (∼30 nm) PM fraction, and this result was confirmed by electron microscopy. Optical absorption of WPS was in the UV region and an increase in λₑₓ led to a red-shift in fluorescence emission with a corresponding decrease in fluorescence intensity. WPS was analyzed in neurotoxicity studies in vitro using presynaptic rat cortex nerve terminals (synaptosomes). Generation of spontaneous reactive oxygen species (ROS) detected using fluorescent dye 2′,7-dichlorofluorescein in nerve terminals was decreased by WPS (10–50 μg/ml) in a dose-dependent manner. WPS also reduced the H₂O₂-evoked ROS production in synaptosomes, thereby influencing cellular oxidative processes and this effect was similar to that for carbon nanodots. WPS (0.1 mg/ml) decreased the synaptosomal membrane potential and synaptic vesicle acidification in fluorimetric experiments. WPS (1.0 mg/ml) attenuated the synaptosomal transporter-mediated uptake of excitatory and inhibitory neurotransmitters, L-[¹⁴C]glutamate and [³H]GABA, respectively. This can lead to an excessive increase in the glutamate concentration in the synaptic cleft and neurotoxicity via over activation of ionotropic glutamate receptors. Therefore, WPS was neurotoxic and provoked presynaptic malfunction through changes of oxidative activity, reduction of the membrane potential, synaptic vesicle acidification, and transporter-mediated uptake of excitatory and inhibitory neurotransmitters in nerve terminals. In summary, synthesis and emission to the environment of ultrafine PM occur during combustion of plastics, thereby polluting air and water resources, and possibly triggering development of neuropathologies.
Show more [+] Less [-]Levels, spatial distribution, and source identification of airborne environmentally persistent free radicals from tree leaves
2020
Environmentally persistent free radicals (EPFRs) are receiving increasing concern due to their toxicity and ubiquity in the environment. To avoid restrictions imposed when using a high-volume active sampler, this study uses tree leaves to act as passive samplers to investigate the spatial distribution characteristics and sources of airborne EPFRs. Tree leaf samples were collected from 120 sites in five areas around China (each approximately 4 km × 4 km). EPFR concentrations in particles (<2 μm) on the surface of 110 leaf samples were detected, ranging from 7.5 × 10¹⁶ to 4.5 × 10¹⁹ spins/g. For the 10 N.D. samples, they were all collected from areas inaccessible by vehicles. The g-values of EPFRs on 68% leaf samples were larger than 2.004, suggesting the electron localized on the oxygen atom, and they were consistent with the road dust sample (g-value: 2.0042). Significant positive correlation was found between concentrations of elemental carbon (tracer of vehicle emissions) and EPFRs. Spatial distribution mapping showed that EPFR levels in various land uses differed noticeably. Although previous work has linked atmospheric EPFRs to waste incineration, the evidence in this study suggests that vehicle emissions, especially from heavy-duty vehicles, are the main sources. While waste incinerators with low emissions or effective dust-control devices might not be an important EPFR contributor. According to our estimation, over 90% of the EPFRs deposited on tree leaves might be attributed to automotive exhaust emissions, as a synergistic effect of primary exhausts and degradation of aromatic compounds in road dust. With adding the trapping agent into the particle samples (<2 μm), signals of hydroxyl radicals were observed. This indicates that EPFRs collected from this phytosampling method can lead to the release of reactive oxygen species (ROS) once they are inhaled by human beings. Thus, this study helps highlight EPFR “hotspots” for potential health risk identification.
Show more [+] Less [-]Graphite particle electrodes that enhance the detoxification of municipal solid waste incineration fly ashes in a three-dimensional electrokinetic platform and its mechanisms
2018
Huang, Tao | Zhang, Shuwen | Liu, Longfei | Xu, Jiaojiao
This paper investigated the application of graphite particle electrodes to the removal of Zn, Pb, Cu, and Cd from municipal solid waste incineration (MSWI) fly ashes in a three-dimensional (3D) electrokinetic reactor. The influences of the voltage gradient, mass ratio of graphite powers to fly ashes, nitric acid concentrations, proposing times, and liquid-solid (L-M) ratios on the remedial efficiencies of MSWI fly ashes were comprehensively studied in an orthogonal deign and a sequential double-factor setup. Significant analysis showed that changes in the mass ratios and nitric acid concentrations both had a statistically significant effect on the removals of Zn and Pb. Proposing times and L-M ratios both remarkably affected the removals of heavy metals (HMs) in a 3D electrochemical system. The graphite powers had a narrower distribution interval and slightly larger surface areas compared with MSWI fly ashes, which relented pH gradients over the time in the electrochemical experiments and minimized the bubble barricade caused by the hydrolysis. The particle electrode had increased the residue factions of Zn, Pb, Cu, and Cd in S1 region by approximately 216%, 136%, 309%, and 950%, respectively, compared with the raw MSWI fly ashes. The addition of graphite powders to a two-dimensional (2D) electrochemical process strengthened hydrolysis reactions, shortened time for the redistribution of pH balance, decreased the tortuosity of migration path, and increased the desorption concentrations of HMs in the sample area.
Show more [+] Less [-]PAHs and PCBs in an Eastern Mediterranean megacity, Istanbul: Their spatial and temporal distributions, air-soil exchange and toxicological effects
2017
Cetin, Banu | Ozturk, Fatma | Keles, Melek | Yurdakul, Sema
Istanbul, one of the mega cities in the world located between Asia and Europe, has suffered from severe air pollution problems due to rapid population growth, traffic and industry. Atmospheric levels of PAHs and PCBs were investigated in Istanbul at 22 sampling sites during four different sampling periods using PUF disk passive air samplers and spatial and temporal variations of these chemicals were determined. Soil samples were also taken at the air sampling sites. At all sites, the average ambient air Σ15PAH and Σ41PCB concentrations were found as 85.6 ± 68.3 ng m−3 and 246 ± 122 pg m−3, respectively. Phenanthrene and anthracene were the predominant PAHs and low molecular weight congeners dominated the PCBs. The PAH concentrations were higher especially at urban sites close to highways. However, the PCBs showed moderately uniform spatial variations. Except four sites, the PAH concentrations were increased with decreasing temperatures during the sampling period, indicating the contributions of combustion sources for residential heating, while PCB concentrations were mostly increased with the temperature, probably due to enhanced volatilization at higher temperatures from their sources. The results of the Factor Analysis represented the impact of traffic, petroleum, coal/biomass and natural gas combustion and medical waste incineration plants on ambient air concentrations. A similar spatial distribution trend was observed in the soil samples. Fugacity ratio results indicated that the source/sink tendency of soil for PAHs and PCBs depends on their volatility and temperature; soil generally acts as a source for lighter PAHs and PCBs particularly in higher temperatures while atmospheric deposition is a main source for higher molecular weight compounds in local soils. Toxicological effect studies also revealed the severity of air and soil pollution especially in terms of PAHs in Istanbul.
Show more [+] Less [-]Differentiating current and past PCB and PCDD/F sources: The role of a large contaminated soil site in an industrialized city area
2017
Di Guardo, Antonio | Terzaghi, Elisa | Raspa, Giuseppe | Borin, Sara | Mapelli, Francesca | Chouaia, Bessem | Zanardini, Elisabetta | Morosini, Cristiana | Colombo, Andrea | Fattore, Elena | Davoli, Enrico | Armiraglio, Stefano | Sale, Vanna M. | Anelli, Simone | Nastasio, Paolo
Cities and contaminated areas can be primary or secondary sources of polychlorinated biphenyls (PCBs), dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), and other chemicals, into air and soil and can influence the regional level of some of these pollutants. In a contaminated site, the evaluation of such emissions can be crucial in the choice of the remediation technology to be adopted. In the city of Brescia (Northern Italy), more than 100 ha of agricultural areas were contaminated with PCBs, PCDD/Fs and heavy metals, originating from the activities of a former PCB factory. In order to evaluate the current emissions of PCBs and PCDD/Fs from the contaminated site, in a location where other current sources are present, we compared measured and predicted air concentrations, resulting from chemical volatilization from soils as well as fingerprints of Brescia soils and of soils contaminated by specific sources. The results confirm that the contaminated area is still a current and important secondary source of PCBs to the air, and to a lesser extent of PCDFs (especially the more volatile), but not for PCDDs. PCBs in soils have fingerprints similar to highly chlorinated mixtures, indicating contamination by these mixtures and/or a long weathering process. PCB 209 is also present at important levels. PCDD fingerprints in soil cannot be related to current emission sources, while PCDFs are compatible to industrial and municipal waste incineration, although weathering and/or natural attenuation may have played a role in modifying such soil fingerprints. Finally, we combined chemical and microbiological analyses to provide an integrated approach to evaluate soil fingerprints and their variation in a wider perspective, which accounts for the mutual effects between contamination and soil microbiota, a pivotal hint for addressing in situ bioremediation activities.
Show more [+] Less [-]Polybrominated dibenzo-p-dioxins/furans (PBDD/Fs) in soil around municipal solid waste incinerator: A comparison with polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs)
2022
Song, Aimin | Li, Huiru | Liu, Mingyang | Peng, Ping'an | Hu, JianFang | Sheng, Guoying | Ying, Guangguo
Polybrominated dibenzo-p-dioxins/furans (PBDD/Fs) and polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) share similar toxicities and thermal origins, e.g., municipal solid waste incinerator (MSWI). Recently, PBDD/Fs from MSWI attracted rising concern because their important precursors, i.e., brominated flame retardants (BFRs), were frequently found in various wastes for landfill or MSWI feedstock. So far, however, little is known about PBDD/Fs and their associated risks in the vicinal environments of MSWI. Here we analyzed PBDD/Fs and PCDD/Fs in 29 soil samples collected around a multiyear large-scale MSWI, and compared their spatial distributions, sources and risks. PBDD/Fs demonstrated comparable concentrations and toxic equivalent quantities (TEQs) to PCDD/Fs in these samples. Spatially, both the concentrations of PBDD/Fs and PCDD/Fs decreased outwards from the MSWI, and exhibited significant linear correlations with the distances from the MSWI in the southeast downwind soil, suggesting the influence of the MSWI on its vicinal soil environment. However, the existence of other dioxin sources concealed its influence beyond 6 km. PBDD/Fs in the soils were characterized by highly-brominated PBDFs, especially Octa-BDF, and their sources were diagnosed as the MSWI and diesel exhaust; PCDD/Fs, however, were dominated by highly-chlorinated PCDDs, particularly Octa-CDD, and were contributed individually or jointly by the MSWI, automobile exhaust and pentachlorophenol (PCP)/Na-PCP. The non-carcinogenic risks of dioxins in all the soil samples were acceptable, but their carcinogenic risks in 17% of the samples were unacceptable. These samples were all located close to the MSWI and highways, therefore, the land use of these two high-risk zones should be cautiously planed.
Show more [+] Less [-]Roles of chlorine and sulphate in MSWIFA in GGBFS binder: Hydration, mechanical properties and stabilization considerations
2021
Ren, Pengfei | Ling, Tung-Chai
In this study, municipal solid waste incineration fly ash (MSWIFA) was first washed (pretreatment) with pure water with liquid to solid (L/S) ratio of 2, 3, 6, 10, to understand the removal efficiency of chlorine and sulphate, as well as its consequent ability as alkaline activator for granulated blast furnace slag (GGBFS). Washed MSWIFA was blended with GGBFS at a fixed ratio of 3:7 to examine their impact on mechanical properties, reaction mechanism, microstructure and leaching behavior. The results showed that chlorine in MSWIFA (>70%) can be washed out easily, while the removal of sulphate was largely depended on the L/S. GGBFS can be better activated by a low L/S (e.g. 2) washed-MSWIFA with attaining the compressive strength of 45.2MPa at 28 days. The higher chlorine and sulphate contents retained in the washed-MSWIFA, the higher the total heat release in the activated GGBFS system. Calcium silicate hydrate (C–S–H), ettringite (AFt) and Friedel’s salt were the main hydration products of the activated binders. The rapid formation of AFt was mainly responsible for the 1-day strength development. Large amounts of Friedel’s salts were formed from 1 day to 3 days associated to the inhibition of sulphate, and the presence of C–S–H played the key role in long-term strength development. The leaching test of heavy metals and soluble ions also demonstrated that washed MSWIFA activated GGBFS binders were harmless to the environment.
Show more [+] Less [-]Explaining social acceptance of a municipal waste incineration plant through sociodemographic and psycho-environmental variables
2020
Subiza-Pérez, Mikel | Marina, Loreto Santa | Irizar, Amaia | Gallastegi, Mara | Anabitarte, Asier | Urbieta, Nerea | Babarro, Izaro | Molinuevo, Amaia | Vozmediano, Laura | Ibarluzea, Jesús
Municipal waste incineration plants (MWIPs) are a source of emission of diverse pollutants that have been associated with environmental and health effects, mainly in relation to premises that are old and not well equipped or maintained. As a result, the public usually holds a negative view of such plants and tends to react adversely to construction of new plants. Understanding a population’s perceptions is key to ensuring the correct development of such infrastructure and adequately managing population health concerns and behaviours. In this study, we surveyed 173 residents living close (≤ 10 km) to an MWIP being built in San Sebastian (Gipuzkoa, Spain) and 164 living further away (>10 km). The questionnaire included sociodemographic and psycho-environmental measures. Answers to the questionnaire revealed a fairly low acceptance rate and the perception of a high risk for human health and the environment (average scores of 0.57, 3.07 and 2.89 respectively in a 0 to 4 scale), with no statistically significant differences between people living nearby and further afield. A hierarchical regression model built to explore the public’s acceptance of the MWIP explained 59% of the variance. Dominance and relative weight analyses revealed that the most important predictors of acceptance were trust in the information provided by the local government and perceived risk for human health, which accounted for 33.7% and 27.4% of the variance explained by the model respectively. Preference for landfilling and MWIP acceptance in a farther location made a less relevant contribution.
Show more [+] Less [-]Combined use of daily and hourly data sets for the source apportionment of particulate matter near a waste incinerator plant
2019
Lucarelli, F. | Barrera, V. | Becagli, S. | Chiari, M. | Giannoni, M. | Nava, S. | Traversi, R. | Calzolai, G.
A particulate matter (PM) source apportionment study was carried out in one of the most polluted districts of Tuscany (Italy), close to an old waste incinerator plant. Due to the high PM10 levels, an extensive field campaign was supported by the Regional Government to identify the main PM sources and quantify their contributions. PM10 daily samples were collected for one year and analysed by different techniques to obtain a complete chemical characterisation (elements, ions and carbon fractions). Hourly fine (<2.5 μm) and coarse (2.5–10 μm) aerosol samples were collected by a Streaker sampler for a shorter period and hourly elemental concentrations were obtained by PIXE.Positive Matrix Factorization (PMF) analysis of daily and hourly data allowed the identification of 10 main sources: six anthropogenic (Biomass Burning, Traffic, Secondary Nitrates, Secondary Sulphates, Incinerator, Heavy Oil combustion), two natural (Saharan Dust and Fresh Sea Salt) and two mixed sources (Local Dust and Aged Sea Salt). Biomass burning turned out to be the main source of PM, accounting for 30% of the PM10 mass as annual average, followed by Traffic (18%) and Secondary Nitrates (14%). Emissions from the Incinerator turned out to be only 2% of PM10 mass on average.PM10 composition and source apportionment have been assessed in a polluted area near a waste incinerator, by PMF analysis on daily and hourly compositional data sets.
Show more [+] Less [-]