The present study aims at designing a promising Microbial Fuel Cell (MFC) to utilize wastewater in order to generate electricity. Two types of salt bridge have been used in MFC (KCl and NaCl). The maximum electricity generation with 1M KCl and NaCl has been 823 and 713 mV, respectively. Varied salt concentrations (0.5M, 1M, 2M, and 3M) of salt bridge in MFC have been analyzed with different factors like temperature, type of electrode, configuration, and surface area of electrode being studied. The optimum temperature is found to be 32Co, with the optimum type of electrode being graphite rod, while the optimum configuration and surface area of electrode is graphite plate with surface area of 183.6 cm2. Artificial Neural Network (ANN) has been employed to predict voltage production of MFC and compare it with the experimental voltage. Multiple   correlation methodology has optimized the voltage production with the correlation coefficient (R2) being 0.999.

With increasing demand for recycled wastewater for irrigation purposes, there is a need to evaluate the potential for manufactured nanomaterials in waste water to impact crop production and agroecosystems. Copper oxide nanoparticles (CuO NPs) have previously been shown to negatively impact the growth of duckweed (Landoltia punctata) a model aquatic plant consumed by water fowl and widely found in agricultural runoff ditches in temperate climates. However, prior studies involving CuO NP toxicity to duckweed have focused on systems without the presence of dissolved organic matter (DOM). In the current study, duckweed growth inhibition was shown to be a function of aqueous Cu²⁺ concentration. Growth inhibition was greatest from aqueous CuCl₂ and, for particles, increased with decreasing CuO particle size. The dissolution of CuO NPs in ½ Hoagland's solution was measured to increase with decreasing particle size and in the presence of Suwannee river humic and fulvic acids (HA; FA). However, the current results suggest that HA, and to a lesser extent, FA, decrease the toxicity of both CuO NPs and free ionized Cu to duckweed, likely by inhibiting Cu availability through Cu-DOM complex formation. Such results are consistent with changes to Cu speciation as predicted by speciation modeling software and suggest that DOM changes Cu speciation and therefore toxicity in natural systems.

The application of the fungicide thiabendazole (TBZ) in fruit packaging plants (FPP) results in the production of effluents which are often disposed in adjacent field sites. These require remediation to prevent further environmental dispersal of TBZ. We assessed the bioaugmentation potential of a newly isolated TBZ-degrading bacterial consortium in a naturally contaminated soil (NCS) exhibiting a natural gradient of TBZ levels (12000, 400, 250 and 12 mg kg⁻¹). The effect of aging on bioaugmentation efficacy was comparatively tested in a soil with similar physicochemical properties and soil microbiota, which was artificially, contaminated with the same TBZ levels (ACS). The impact of bioaugmentation and TBZ on the bacterial diversity in the NCS was explored via amplicon sequencing. Bioaugmentation effectively removed TBZ from both soils at levels up to 400 mg kg⁻¹ but failed at the highest contamination level (12000 mg kg⁻¹). Dissipation of TBZ in bioaugmented samples showed a concentration-dependent pattern, while aging of TBZ had a slight effect on bioaugmentation efficiency. Bioaugmentation had no impact on the soil bacterial diversity, in contrast to TBZ contamination. Soils from the hotspots of TBZ contamination (12000 mg kg⁻¹) showed a drastically lower α-diversity driven by the dominance of β- and γ-proteobacteria at the expense of all other bacterial phyla, especially Actinobacteria. Overall, bioaugmentation with specialized microbial inocula could be an effective solution for the recovery of disposal sites contaminated with persistent chemicals like TBZ.

Hormone active agents constitute a dangerous class of pollutants. Among them, those agents that mimic the action of estrogens on target cells and are part of the group of endocrine-disruptor compounds (EDCs) are termed estrogenic EDCs, the main focus of this review. Exposure to these compounds causes a number of negative effects, including breast cancer, infertility and animal hermaphroditism. However, especially in underdeveloped countries, limited efforts have been made to warn people about this serious issue, explain the methods of minimizing exposure, and develop feasible and efficient mitigation strategies at different levels and in various environments. For instance, the use of bioremediation processes capable of transforming EDCs into environmentally friendly compounds has been little explored. A wide diversity of estrogen-degrading microorganisms could be used to develop such technologies, which include bioremediation processes for EDCs that could be implemented in biological filters for the post-treatment of wastewater effluent. This review describes problems associated with EDCs, primarily estrogenic EDCs, including exposure as well as the present status of understanding and the effects of natural and synthetic hormones and estrogenic EDCs on living organisms. We also describe potential biotechnological strategies for EDC biodegradation, and suggest novel treatment approaches for minimizing the persistence of EDCs in the environment.

Recent studies have indicated that urban streets can be hotspots for emissions of methane (CH4) from leaky natural gas lines, particularly in cities with older natural gas distribution systems. The objective of the current study was to determine whether leaking sewer pipes could also be a source of street-level CH4 as well as nitrous oxide (N2O) in Cincinnati, Ohio, a city with a relatively new gas pipeline network. To do this, we measured the carbon (δ13C) and hydrogen (δ2H) stable isotopic composition of CH4 to distinguish between biogenic CH4 from sewer gas and thermogenic CH4 from leaking natural gas pipelines and measured CH4 and N2O flux rates and concentrations at sites from a previous study of street-level CH4 enhancements (77 out of 104 sites) as well as additional sites found through surveying sewer grates and utility manholes (27 out of 104 sites). The average isotopic signatures for δ13C-CH4 and δ2H-CH4 were −48.5‰ ± 6.0‰ and −302‰ ± 142‰. The measured flux rates ranged from 0.0 to 282.5 mg CH4 day−1 and 0.0–14.1 mg N2O day−1 (n = 43). The average CH4 and N2O concentrations measured in our study were 4.0 ± 7.6 ppm and 392 ± 158 ppb, respectively (n = 104). 72% of sites where fluxes were measured were a source of biogenic CH4. Overall, 47% of the sampled sites had biogenic CH4, while only 13% of our sites had solely thermogenic CH4. The other sites were either a source of both biogenic and thermogenic CH4 (13%), and a relatively large portion of sites had an unresolved source (29%). Overall, this survey of emissions across a large urban area indicates that production and emission of biogenic CH4 and N2O is considerable, although CH4 fluxes are lower than those reported for cities with leaky natural gas distribution systems.

The use of reclaimed wastewater for irrigation is foreseen as a possible strategy to mitigate the pressure on water resources in dry regions. However, there is the risk of potential accumulation of contaminants of emerging concern (CECs) in the edaphic environment, their percolation and consequently contamination of aquifers. In the present study, we measured the levels of a wide range of commonly used pharmaceutically active compounds (PhACs) in sewage from a local wastewater treatment plant (WWTP) and in soils irrigated with treated wastewater. Analysis of target compounds showed total concentrations between 73 and 372 μg L⁻¹ in WWTP influents, and from 3 to 41 μg L⁻¹ in effluents. The total concentrations of PhACs detected in surface soil samples were in the range of 2 and 15 ng g⁻¹, with predominance of analgesics and anti-inflammatories (maximum concentration = 10.05 ng g⁻¹), followed by antibiotics and psychiatric drugs (maximum concentration = 5.45 ng g⁻¹ and 3.78 ng g⁻¹, respectively). Both effluent samples and irrigated soils shared similar compositional patterns, with compounds such as hydrochlorothiazide and diclofenac being predominant. Additionally, PhACs were also detected in soil samples at a depth of 150 cm, indicating that these chemical undergo leaching associated with heavy-rain episodes. Their occurrence in soils was affected by temperature too, as maximum concentrations were measured in colder months (up to 14 ng g⁻¹), indicating higher persistence at lower temperatures. Finally, the ecotoxicological risk of PhACs in soil was evaluated by calculating their risk quotients (RQs). The risk was very low as RQ values ranged between <0.01 and 0.07. However, this initial assessment could be improved by future works on toxicity using specific terrestrial organisms.

Cyclophosphamide (CP) and Ifosfamide (IF) are two nitrogen mustard drugs widely prescribed in cancer therapy. They are continuously released via excreta into hospital and urban wastewaters reaching wastewater treatment plants. Although CP and IF, their metabolites and transformation products (TPs) residues have been found in the aquatic environment from few ng L⁻¹ to tens of μg L⁻¹, their environmental toxic effects are still not well known. The present study aimed to investigate the acute and chronic ecotoxicity of CP and IF and their commercially available human metabolites/TPs, i.e. carboxy-CP, Keto-CP and N-dechloroethyl-CP on different organisms of the aquatic trophic chain. The experiments were performed using the green alga Pseudokirchneriella subcapitata, the rotifer Brachionus calyciflorus and the crustaceans Thamnocephalus platyurus and Ceriodaphnia dubia. Moreover, to assess the treatment conditions in regards to parent compound removal and formation of new TPs, CP and IF were UV- irradiated for 6 h, 12 h, 24 h, 36 h and 48 h, followed by toxicity evaluation of treated samples by algae, rotifers and crustaceans. Between the parent compounds, IF resulted as more toxic drug under tested conditions, exerting both acute and chronic effects especially on C. dubia (LC50:196.4 mg L⁻¹, EC50:15.84 mg L⁻¹). Among the tested metabolites/TPs, only carboxy-CP inhibited the reproduction in the rotifer. However, LOEC and NOEC values were calculated for CP and IF for all organisms. In addition, despite a low degradation of CP (28%) and IF (36%) after 48 h UV-irradiation, statistically significant effect differences (p < 0.05) from not-irradiated and irradiated samples were observed in both acute and chronic assays, starting from 6 h UV-irradiation. Our results suggest that the toxic effects found in the aquatic organisms may be attributable to interactions between the parent compounds and their metabolites/TPs.

The determination of values of abundance of antibiotic resistance genes (ARGs) per mass of soil is extremely useful to assess the potential impacts of relevant sources of antibiotic resistance, such as irrigation with treated wastewater or manure application. Culture-independent methods and, in particular, quantitative PCR (qPCR), have been regarded as suitable approaches for such a purpose. However, it is arguable if these methods are sensitive enough to measure ARGs abundance at levels that may represent a risk for environmental and human health. This study aimed at demonstrating the range of values of ARGs quantification that can be expected based on currently used procedures of DNA extraction and qPCR analyses. The demonstration was based on the use of soil samples spiked with known amounts of wastewater antibiotic resistant bacteria (ARB) (Enterococcus faecalis, Escherichia coli, Acinetobacter johnsonii, or Pseudomonas aeruginosa), harbouring known ARGs, and also on the calculation of expected values determined based on qPCR.The limits of quantification (LOQ) of the ARGs (vanA, qnrS, blaTEM, blaOXA, blaIMP, blaVIM) were observed to be approximately 4 log-units per gram of soil dry weight, irrespective of the type of soil tested. These values were close to the theoretical LOQ values calculated based on currently used DNA extraction methods and qPCR procedures. The observed LOQ values can be considered extremely high to perform an accurate assessment of the impacts of ARGs discharges in soils. A key message is that ARGs accumulation will be noticeable only at very high doses. The assessment of the impacts of ARGs discharges in soils, of associated risks of propagation and potential transmission to humans, must take into consideration this type of evidence, and avoid the simplistic assumption that no detection corresponds to risk absence.

Environmental observations of antibiotics and other pharmaceuticals have received attention as indicators of an urbanizing global water cycle. When connections between environment and development of antibiotic resistance (ABR) are considered, it is increasingly important to understand the life cycle of antibiotics. Here we examined the global occurrence of erythromycin (ERY) in: 1. wastewater effluent, inland waters, drinking water, groundwater, and estuarine and coastal systems; 2. sewage sludge, biosolids and sediments; and 3. tissues of aquatic organisms. We then performed probabilistic environmental hazard assessments to identify probabilities of exceeding the predicted no-effect concentration (PNEC) of 1.0 μg L−1 for promoting ABR, based on previous modeling of minimum inhibitory concentrations and minimal selective concentrations of ERY, and measured levels from different geographic regions. Marked differences were observed among geographic regions and matrices. For example, more information was available for water matrices (312 publications) than solids (97 publications). ERY has primarily been studied in Asia, North America and Europe with the majority of studies performed in China, USA, Spain and the United Kingdom. In surface waters 72.4% of the Asian studies have been performed in China, while 85.4% of the observations from North America were from the USA; Spain represented 41.9% of the European surface water studies. Remarkably, results from PEHAs indicated that the likelihood of exceeding the ERY PNEC for ABR in effluents was markedly high in Asia (33.3%) followed by Europe (20%) and North America (17.8%). Unfortunately, ERY occurrence data is comparatively limited in coastal and marine systems across large geographic regions including Southwest Asia, Eastern Europe, Africa, and Central and South America. Future studies are needed to understand risks of ERY and other antibiotics to human health and the environment, particularly in developing regions where waste management systems and treatment infrastructure are being implemented slower than access to and consumption of pharmaceuticals is occurring.

This study assessed the environmental risk on coastal ecosystems posed by three phenolic compounds of special environmental and human health concern used in plastics and household products: bisphenol A (BPA), triclosan (TCS) and 4-nonylphenol (4-NP). These three chemicals are among the organic contaminants most frequently detected in wastewater. The most toxic compound tested was 4-NP, with 10% effective concentration at 11.1 μg L⁻¹ for Isochrysis galbana, 110.5 μg L⁻¹ for Mytilus galloprovincialis, 53.8 μg L⁻¹ for Paracentrotus lividus, and 29.0 μg L⁻¹ for Acartia clausi, followed by TCS (14.6 μg L⁻¹ for I. galbana, 149.8 μg L⁻¹ for M. galloprovincialis, 129.9 μg L⁻¹ for P. lividus, and 64.8 μg L⁻¹ for A. clausi). For all species tested, BPA was the less toxic chemical, with toxicity thresholds ranging between 400 and 1200 μg L⁻¹ except for A. clausi nauplii (186 μg L⁻¹). The relatively narrow range of variation in toxicity considering the broad physiological differences among the biological models used point at non-selective mechanisms of toxicity for these aromatic organics. Microalgae, the main primary producers in pelagic ecosystems, showed particularly high susceptibility to the chemicals tested. When the toxicity thresholds experimentally obtained were compared to the maximum environmental concentrations reported in coastal waters, the risk quotients obtained correspond to very low or low risk for BPA and TCS, and from low to high for 4-NP.