Olive mill wastewater is the main by-product derived from olive mills using the three-phase extraction process,displaying a serious environmental risk due to its notable content in organics and phenolics Olive oil production, an agro-industrial of vital economic particularly in Mediterranean countries, is unfortunately associated with the generation of large quantities of OMW (Olive Mill Wastewater) and solid wastes. The OMW is considered a major environmental problem, it is a powerful pollutant rejected in nature without any prior treatment. This research work aims to study the treatment of OMW by a new ecological and economic system, which consists of the use of the following components: gravel, sawdust, soil, activated carbon, bamboo, and the valorization of the solid residues. HPLC analysis showed that hydroxytyrosol is the most abundant biophenol. Many other biophenols were identified (Tyrosol, gallic acid, and eleonic acid). The comparison between before and after filtration by the new system showed an essential degradation of phenolic compounds after treatment and found a new compound resulting from their degradation.

The goal of this research was to investigate the efficacy photocatalysis with natural solar radiation and artificial UV radiation for disinfecting total coliforms in biologically treated wastewater.   The effect of TiO2 dosage and irradiation time on total coliform inactivation as measured by log reduction values (LRV), removal of BOD, COD, turbidity, and effluent properties as measured by pH and conductivity was investigated. Two sets of experimental equipment were constructed, one for using solar UV light and the other for using artificial UV light. After four hours of irradiation with 60 mg/L TiO2, photocatalysis achieved LRVs of 1.4 and 1, respectively, under UV and solar radiation. COD and BOD were reduced by 67% and 50% respectively under UV and solar radiation after two hours of irradiation with 60 mg/L TiO2. Turbidity was reduced by 71%. Both conductivity and acidity of the effluent were reduced as TiO2 concentration was increased. Photocatalysis with natural solar radiation produced disinfection results that were comparable to that of efficient UV light exposure. Artificial UV light and natural solar radiation can be combined in photocatalysis process to form a hybrid process.

Natural quartz mineral was examined as a new sorbent for Hg(II) removal from synthetic wastewater systems. Batch adsorption experiments of Hg(II)  onto quartz mineral were conducted under various conditions such as solution pH, sorbent dosage, contact time, initial Hg(II)  concentration. Adsorption experiments results of Hg(II) by quartz mineral showed good achievement after 180 min with 1.0 g/L sorbent mass at pH of 2.0, agitation speed of 200 rpm and a temperature of 25°C. Moreover, the Hg(II) concentration was directly related to increases the adsorption capacity, the maximum Hg(II) uptake by quartz  sample was 16.52 mg/g for 80 mg/L (C0 (Hg(II)].  Langmuir isotherm and pseudo-second-order kinetics (R2 > 0.99) were found to be the most appropriate models to describe the adsorption of Hg(II) by quartz mineral. The intra-particle diffusion model and the calculated Dubinin–Radushkevich adsorption energy (Eads = 0.78 kJmol-1), confirms a physisorption adsorption reaction occurring in three stages.

The Huatanay River in Cusco-Peru, is affected by wastewater discharges along its course. In order to evaluate this impact, we evaluate antibiotic residues and their impact on the increase of bacterial resistance in the city of Cusco treatment plant. For this purpose, water samples from the influent and effluent of the treatment plant were analyzed by chromatographic methods; additionally, sensitivity tests were performed with three bacterial strains (Escherichia coli, Salmonella sp., and Klebsiella sp.), which were isolated from the same place. Six antibiotic residues were identified (ceftriaxone, amoxicillin, trimethoprim, sulfamethoxazole, dicloxacillin, and lincomycin). Those found in the highest concentration were: amoxicillin (91495 and 0 µg/L) and lincomycin (33970 and 10800 µg/L) in the influent and effluent, respectively. There is more resistance in the effluent than the influent in the case of E. coli shows resistance in the effluent to cephalexin (30 µg) and azithromycin (15 µg). Salmonella sp. is resistant to amoxicillin (15 µg), dicloxacillin (1 µg), lincomycin (2 µg), ceftriaxone (30 µg), cephalexin (30 µg), and ciprofloxacin (5 µg). Finally, Klebsiella sp. is sensitive to ceftriaxone (30 µg), amoxicillin (15 µg), and cephalexin (30 µg). This confirms that the antibiotic residues contained in the wastewater of Cusco generate resistance in the isolated bacteria.

Substrates play a major role to filter, adsorb, sediment, flocculate, precipitate, and exchange ions. In CW (Constructed wetland), selecting substrate or bed materials is not difficult, as locally accessible, cost-effective, and environment-friendly materials can be used based on size, hydraulic conductivity, texture, porosity, etc. CW substrates undergo a multitude of purification processes, including physical filtration and sedimentation, sorption, ion exchange and microbial degradation, precipitation, and bio-immobilization in the substrate, in addition to uptake and metabolism by macrophytes. With constructed wetlands, treatment facilities with well-defined substrates, vegetation species, and flow patterns can be built with greater control than with natural systems. This report details investigations of some of the locally available substrates that all fit the requirements. Based on analysis of parameters which are pH, water absorption capacity, hydraulic conductivity, porosity, surface area, bulk density, particle size distribution, D10 particle diameter, D60 uniformity coefficient, permeability and specific gravity, a comparison of four materials is presented in this paper. The study found that the construction waste materials evaluated showed satisfactory physical properties for use as filler media in constructed wetlands for wastewater treatment.

peer reviewed | Contamination of land and aquatic ecosystems with heavy metals (HMs) is a global issue having the persistent potential to damage the quality of food and water. In the present study, Tagetes erecta L. plants were used to assess their potential to uptake HMs from wastewater. Plants were grown in soil for 20 days and then transplanted in hydroponic system containing Hoagland nutrient solution. After more than 15 days of growth, plants were then subjected to wastewater from tannery and surgical industries in different concentrations ranging from 25 to 100% in combination of citric acid (5 and 10 mM). After 6 weeks of treatment, plants were collected and segmented into roots, stem, and leaves for characterizing the morphological properties including plant height, roots length, fresh and dry mass of roots, stem, and leaves. For evaluation of the effect of wastewater on the plants, photosynthetic pigments; soluble proteins; reactive oxygen species (ROS); antioxidant enzymes SOD, POD, CAT, and APX; and metal accumulation were analyzed. Application of industrial wastewater revealed a significant effect on plant morphology under wastewater treatments. Overall growth and physiological attributes of plant decreased, and metal accumulation enhanced with increasing concentration of wastewater. Similarly, the production of ROS and antioxidant enzymes were also increased. Chlorophyll, protein content, and enzyme production enhanced with CA (5 and 10 mM) mediation; however, ROS production and EL were reduced. Metals analysis showed that the maximum accumulation of Pb was in roots, while Cr and Ni in the stem which further increased under CA mediation. Overall, the metal accumulation ability was in the order of Pb > Ni > Cr under CA.

International audience | Heterostructured nanomaterials exhibit pronounced potential in environmental science, including the water purification, pollutant monitoring, and environmental remediation. Especially, their application through advanced oxidation processes has been found capable and adaptable in waste water treatment. In semiconductor photocatalysts, metal sulfides are the leading materials. However, for further modifications, the progresses on specific materials need to be overviewed. Among metal sulfides, nickel sulfides are the emerging semiconductors due to relatively narrow band gaps, high thermal and chemical stability, and cost effectiveness. The aim of the present review is to conduct a thorough analysis and summary of recent progress in the application of nickel sulfide-based heterostructures in water decontamination. Initially, the review introduces the emerging needs of the materials for environment following the characteristics features of metal sulfides with emphasis on nickel sulfides. Subsequently, synthesis strategies and structural properties of nickel sulfide (NiS and NiS2)-based photocatalysts are discussed. Herein, controlled synthesis procedures to influence their active structure, compositions, shape, and size for the enhanced photocatalytic performances are also considered. Furthermore, there is discussion on heterostructures formed by metal modification, metal oxides, and carbon hybridized nanocomposites. In the continuation, the modified characteristics are investigated which favors the photocatalytic processes for degradation of organic contami-nations in water. The overall study highlights significant improvements in degradation efficiency of hetero-interfaced NiS and NiS2 photocatalysts towards organics that are comparable to expensive noble-metal photocatalysts. Finally, we also added a little on prospects for future advancement of nickel sulfide-based photocatalysts for applications in sustainable environmental remediation.

Levrier Bay, located in the western part of Mauritanian Cost, has a strategic position in Mauritania’s fish economy and reproduction environment. Recently, fishmeal factories have multiplied in the bay. This study was carried out in Levrier Bay. It is the first one in this area which is interested in assessing the environmental impact of fishmeal factory discharges by measuring several parameters such as suspended matter, chemical oxygen demand (COD), biological oxygen demand (BOD), conductivity, turbidity, and salinity. A total of 27 samples were collected at 9 sites distributed on the link between effluents from factories and the Atlantic Ocean (discharge site). Results show that some parameters are over permissible values, like suspended matter content (SS), which reached 2020 mg. L.-1 level. The turbidity measure shows excessively high values (50 to 961 mg.L.-1); impacted by effluents at the reject point, the seawater conductivity and salinity are particularly low (4.53 to 188.2 and 13 to 56.4, respectively). The total organic carbon (TOC) values ranged from 200 to 780 mg/L, whereas the highest measured level of chemical oxygen demand was 4010 mg.L.-1 Biochemical oxygen demand content ranged from 685 to 961 mg/L. The biodegradability index (COD/BOD) shows that these effluents are not easily biodegradable because the index > 3.

The paper presents the treatment of atrazine-contaminated wastewater by ozonation followed by an anaerobic process using Upflow Anaerobic Sludge Blanket (UASB) reactor. The experiment was performed with 100 ppb synthetic solutions of atrazine prepared in ultra-pure water. The corresponding initial Chemical Oxygen Demand (COD) is 226 mg.L-1. The initial pH was adjusted to 9.5. The atrazine-bearing synthetic wastewater was ozonated with an ozone dose of 9.4mg/l for 40 minutes of optimum ozonation time, resulting in a 35% reduction in the initial concentration of atrazine. Along with atrazine reduction, there was a COD removal of 54.42%. Further, it was degraded with an anaerobic process, resulting in the final reduction in atrazine concentration of 81% and the corresponding removal in COD of 86.7%. The process of ozonation led to the mineralization of atrazine and enhancement in the biodegradability of the wastewater. Using ion chromatography, the ozonated wastewater sample was analyzed for ionic by-products before and after ozonation. The ion chromatography results showed the breaking of the atrazine compound and the formation of Cl-, NO3-, SO42-, and F- as intermediate products. Further, the BOD5/COD ratio increased, reflecting the increased biodegradability. This ozonated wastewater was treated in a UASB reactor where the pesticide was degraded to 19 ppb, and COs degraded to 30 mg.L-1. The overall removal of atrazine pesticide and COD were 81% and 86.7%, respectively, in the integrated system of ozonation followed by anaerobic degradation.

This first-of-its-kind study systematically assesses the abundance and characteristics of Microplastics (MPs) in different categories of informal open drains (nallas) carrying different liquid waste streams from different functional areas of an Indian city. Such drains are part of the informal urban drainage system that carries wastewater, stormwater, industrial effluent, and rural runoff. Logistical and locational limitations of traditional wastewater (WW) sampling methods severely limit their application in open drains. To overcome sampling challenges owing to complex geography, vast drainage network spread across different functional areas of the entire city, and local challenges, appropriately modified sampling strategies were adopted to collect samples from 35 open WW drains (small/local, intermediatory, and large). MPs (50μm-5mm) were present in a bucket, and net samples obtained from all 35 WW drains. The average MP concentration in WW drains was 4.20 ± 1.40 particles/L (bucket samples) and 5.19 ± 1.32 particles/L (net samples). A declining trend of MPs abundance was observed from larger to smaller drains, confirming that smaller and intermediatory drains (carrying WW from different functional areas of the city) are discharging their MP loads into larger drains. Intermixing different WW streams (municipal WW, stormwater surface runoff, agricultural runoff, and industrial WW) increases MP levels in drains. The local riverine ecosystem is being put at risk by a daily MPs load of 12.6 x 108 particles discharged from 9 larger drains into the local river Kharun. To protect the riverine ecosystem, controlling the high daily MPs load from such drains is important. Diversion of WW drains through constructed wetlands built near river banks can be a cost-effective solution. Because the entire Indian subcontinent and parts of Africa rely mainly on such drains having similar characteristics and local conditions, the findings of this study reflect the status and pattern of MPs pollution in informal drains of the entire Indian subcontinent and can be used by stakeholders and governments to take mitigative and preventive measures to manage the MPs pollution and protect the local riverine ecosystem.