Water and sediment samples have been collected from five different stations, located along Djendjen River between February and June, 2016 so that the concentrations of Cd, Ni, Zn, and Cu could be determined. The extent of the sediment pollution has been assessed, using the multiple pollution indices, namely Contamination Factor (CF), Pollution Load Index (PLI), and the geoaccumulation index (Igeo).The distribution of trace elements in water and sediment follows Ni>Zn>Cd>Cu and Zn>Ni>Cu>Cd, respectively. The water sample analysis from Djendjen River shows that the total concentrations of Cu, Ni, Cd, and Zn have been lower according to the references. In comparison, sediment mean metal concentrations with several environmental contamination parameters, like probable effect level (PEC) and background levels, indicates that the concentrations of all investigated elements are lesser than PEC, except for Ni, but higher than the background levels. The Igeo values reveal that Cd has been the most accumulated compared to the other metals.  Contamination Factor (CF) confirms that the sediment samples have been moderate in terms of all studied metals contamination. The Pollution Load Index (PLI) values have been above one (>1), indicating an advanced decline of the sediment quality.

Water and sediment samples were collected from six different stations, located along the Nil River between February and June 2015. Concentrations of cadmium, lead, zinc, and copper were determined. The extent of the sediment pollution was assessed, using the multiple pollution indices, namely contamination factor (CF), pollution load index (PLI), and the geoaccumulation index (Igeo). The results showed that the level of metals in water samples exceeded background concentrations for Cd and Pb, and the average values for those elements were higher than those of Zn and Cu, ranked as the following: Pb (0.58)> Zn (0.38)> Cd (0.32)> Cu (0.061). For sedimentary samples, the results showed that Zn and Pb concentrations were greater than the concentrations of Cu and Cd, exceeding the background values (except for Cu). The concentration of the tested heavy metals decreased to the following order: Zn (96.2)> Pb (61.5)> Cu (38.83)> Cd (2.34). The Igeo values revealed that Cd (2.87) and Pb (1.61) had accumulated significantly in the Nil River. Contamination factor (CF) confirmed that the sedimentary samples were moderate to very high in terms of Cd, Pb, and Zn contamination. The Pollution Load Index (PLI) values were above one (>1), indicating an advanced decline of the sediment quality. Also, the results showed that the stations, located at the middle portion of the river (S3, S4, and S5) have higher levels of metals than the other stations (S1, S2, and S6). The assessment of heavy metals' levels in water and sedimentary samples indicated that river water and the sediments in the study area were strongly impacted by agricultural activities and domestic waste water.

The present investigation characterizes tannery effluents by determining water quality parameters and some selected trace metallic constituents in order to measure the magnitude of environmental pollution. Effluents and sediments have also been used to isolate chromium-resistant bacteria, collected from Hazaribagh area, Dhaka, claimed to be increasing Cr (VI)-enriched environments, and utilized to reduce Cr (VI). The pH, TDS, DO, and EC values of all investigated samples have been within the range of 4.35 to 9.74, 290 to 9,200 mg/L, 1.5 to 4.90 mg/L, and 587 to 19,000 µs/cm, respectively. The concentrations of trace metallic constituents have been determined by means of Atomic Absorption Spectrophotometer (AAS), giving the following ranges: Cr: 14.282 to 6,769.554 mg/L; Cd: 1.546 to 2.214 mg/L; Pb: 18.808 to 32.026 mg/L; Cu: 1.522 to 2.578 mg/L; Zn: 0.682 to 8.688 mg/L; Fe: 1.37 to 108.556 mg/L; and Mn: 3.494 to 17.17 mg/L. The order of trace metallic constituents in the effluent samples was Cr > Fe > Pb > Mn > Zn > Cd > Cu. The water quality parameters and metallic constituents’ concentration were higher than that of standard permissible limits in all the examined samples. The average number of Cr (VI)-resistant bacteria in the sediment samples with glucose (0.5%, w/v) supplementation was 2.35× 103 CFU/gm at 24h. One of the representative isolate was able to tolerate up to 400 mg/L of K2Cr2O7 as Cr (VI). The bacteria, isolated in the present study, can be used as eco-friendly biological agents for the remediation and/or detoxification of chromium (Cr) pollution from the chromium contaminated environments.

This work explores the potential toxicity of agricultural waste materials, specifically date palm seeds and palm fronds, on plant growth and health. These waste materials have shown promise as bioadsorbents for water purification, but their impact on plants needs to be understood. Toxicity assessments are crucial to ensure safe utilization and prevent negative effects on agricultural systems and ecosystems. Date palm seeds and palm fronds contain chemical compounds that can have allelopathic properties and influence neighboring plant growth. Experimental methods were employed to evaluate the phytotoxic effects of these materials, including germination assays and root growth inhibition tests. The results indicate that upon adsorption of PO4, palm leaves exhibited a significant enhancement in germination, leading to a remarkable increase of up to 371%. This outcome strongly emphasizes the effectiveness of palm leaves as vegetable fertilizers, highlighting their potential in agricultural applications. These findings contribute to understanding the phytotoxic potential of agricultural waste materials and developing sustainable utilization strategies.

Water is one of the most crucial substances for life. In order to maintain their public health, each and every country has defined standards of drinking water quality, beyond which the water is considered harmful for human health. The current study compares physical, chemical, and biological standards of drinking water quality for the USA, EU, Japan, India, and Bangladesh, considering 4 physical parameters (namely, color, odor, taste, and turbidity), 35 chemical parameters (such as Calcium (Ca), Magnesium (Mg), Phosphate (PO43-), Sodium (Na), Phenolic compounds, Nitrite (NO2-), Arsenic (As), Aluminum (Al), etc.) and 2 biological parameters (i.e., Coliform (Fecal) and Coliform (Total)). The data has been collected from several secondary sources and since processes of data collection for water quality differ from one another, this aspect has been ignored. No variation has been found in biological water quality standards along with physical quality standards of the considered regions. In order to find out the differences in chemical parameters, standard ANOVA and pair-wise F-test have been conducted. There was no disparity among chemical parameters in ANOVA test. Moreover, thanks to the few excessive values of the standards (as in case of Bangladesh), the COD value is 4 mg/L, whereas in other countries this parameter is much less. However, the chemical parameters of water quality standards in Bangladesh vary significantly from other countries. Besides, there has been no variation among the standards of other countries, even though they are located in different continents. Most interestingly, despite being neighbors, Bangladesh and India differ significantly in this regard.

Djendjen River is one of the largest rivers in the region of Jijel (Algeria). Human activities such as urban discharges, industrial, agricultural, and livestock have significant effects on the quality of water. The present study attempts to evaluate the quality of water along the banks of the Djendjen River at different sampling sites, using physico-chemical and bacteriological methods. The collected samples are analyzed per standard method parameters and measured in situ. The mean values of the physico-chemical parameters of the river water samples are consistently lower than the levels, certified by the Algerian standard (exept for pH and PO43-). The total and fecal coliform surpasses the Algerian standard limits (0 cfu/ 100 ml) at all sites, signifying that without treatment the water is unsuitable for human consumption. Results reveal that water quality of the Djendjen River is generally affected by the anthropogenic activities, taking place along its banks. The moderate organic pollution (OPI= 2-2.6) and high faecal contamination (MQI=3-3.25) of water in the study area has adverse impacts on the environment and public health, which requires a combined treatment (biological and physicochemical).

A total of 58 Cadmium tolerant bacterial isolates were isolated from 26 samples collected from 20 villages/city of different contaminated water samples from industrial and mining affected areas of Chhattisgarh (India). Out of 58 bacterial isolates, 15 bacterial isolates were able to grow in presence of 40 mM cadmium chloride. These fifteen were further screened by biochemical characterization, antibiotic susceptibility and presence of czcA gene. However, finally five selected isolates (BSWC3, RgCWC2, RgUWC1, RpSWC3, KDWC1) were identified by 16S rRNA gene sequencing belonged to the genus Serratia liquefaciens, Klebsiella quasipneumoniae subsp. similipneumoniae, Klebsiella pneumoniae, Pantoea dispersa and Enterobacter tabaci, respectively. Among these two best culture Serratia liquefaciens BSWC3 and Klebsiella pneumoniae RpSWC3 were testes for their bioremediation efficiency individually as well as in mixed culture. Atomic Absorption spectrophotometer analysis of samples revealed that cadmium (Cd) tolerant bacterial isolates BSWC3, RpSWC3 and Combination of BSWC3 and RpSWC3 were significantly reduce of cadmium concentration i.e. 44.46%, 40% and 50.92%, respectively as compared to control. Therefore, the finding of the present study revealed the use of mixed culture or consortium of indigenous isolates is the better option for bioremediation of heavy metals.