With the constant development of new ionic liquids, the understanding of the chemical fate of these compounds also needs to be updated. To this effect, the interaction of a number of novel ionic liquids with soils was determined. Therefore, three novel headgroups (ammonium, phosphonium, or pyrrolidinium) with single or quaternary substitution were tested on a variety of soils with high-to-low organic matter content and high-to-low cation exchange capacity, thereby trying to capture the full range of possible soil interactions. It was found that the ionic liquids with single butyl alkyl chain interacted more strongly with the soils (especially with a higher cation exchange capacity), at lower concentrations, than the quad-substituted ionic liquids. However, the quad-substituted ionic liquids interacted more strongly at higher concentrations, due to the double-layer formation, and induced stronger dipole interaction with previously sorbed molecules.

Geochemical characterization of two landfills, one closed and the other still active, both located near Komotini (Thrace, Greece), has been carried out. The aim was to provide an integrated and reliable methodology for a rapid assessment of the real impact of a municipal solid waste landfill, in the main environmental matrices (air and water) of the surrounding areas. The chemical (CO₂, CH₄, CO, H₂, N₂, and O₂ + Ar) and isotopic characterization (δ¹³C₍CO₂₎ and δ¹³C₍CH₄₎) of landfill gas and chemical (Na⁺, K⁺, Ca²⁺, Mg²⁺, Cl⁻, SO₄ ²⁻, HCO₃ ⁻, NH₄ ⁺, NO₃ ⁻, NO₂ ⁻, B, COD, Fe, Mn, As, Cr, Ni, Cu, Zn, Cd, Pb, and Hg) and isotopic analysis (δD, δ¹⁸O, tritium content, and δ¹³CDIC) of leachate, stream waters and groundwaters, and flux survey on the air–soil interface has been carried out. Combined chemical and isotopic analysis of the fluids collected inside and in the surroundings of the Komotini landfills supply a detailed picture of biogas emission and composition as well as of leachate chemistry and interaction with local waters. The results arising in this case study demonstrate that it is possible to propose a quick and reliable geochemical protocol to get a detailed picture of the state of health of the environment around a landfill.

A neutrophilic, autotrophic bacterium that couples iron oxidation to nitrate reduction (iron-oxidizing bacteria [IOB]) under anoxic conditions was isolated from a working bioremediation site in Trail, British Columbia. The site was designed and developed primarily to treat high concentrations of Zn and As that originate from capped industrial landfill sites. The system consisted of two upflow biochemical reactor cells (BCR) followed by three vegetated wetland polishing cells with sub-surface flow and a holding pond. During a 5-year period (2003–2007), the system treated more than 19,100 m³ of contaminated water, removing and sequestering more than 10,700 kg of As, Zn and sulfate at average input water concentrations of: As, 58.6 mg l⁻¹ (±39.9 mg l⁻¹); Zn, 51.9 mg l⁻¹ (±35.4 mg l⁻¹) and SO₄ ²⁻, 781.5 mg l⁻¹ (±287.8 mg l⁻¹). The bacterium was isolated in order to better understand the mechanisms underlying the consistent As removal that took place in the system. Analysis using Basic Local Alignment Search Tool (BLAST) database showed that the closest homologies are to Candidatus accumulibacterphosphatis (95 % homology), Dechloromonas aromatica (94 %), and Sideroxydans lithotrophicus ES-1 (92 %) Within the BCR cells, the IOB oxidized Fe²⁺ generated by iron-reducing bacteria (IRB); the source of the iron was most likely biosolids and coatings of iron oxide on locally available sand used in the matrix. We have provisionally designated the novel bacterium as TR1.

Aquatic birds are often used as a health indicator of the marine ecosystem. African penguins living in the zoo make good research material as they form a link between the marine and the terrestrial ecosystem in terms of xenobiotic circulation. Tests were performed on whole herring—the food of the penguins—as well as on bird muscle, liver, brain, eggs, feathers and guano in order to determine total mercury, aldrin, dieldrin, endrin, isodrin, endosulfan isomers, endosulfan sulfate, methoxychlor, dichlorodiphenyltrichloroethane (DDT) and its metabolites. In herring and penguin, the tests did not show the presence of β-endosulfan, endosulfan sulfate, aldrin and isodrin. It was shown that penguins absorb about 36.8 μg of organochlorine pesticides and 4.6 μg of mercury with their food on a daily basis. Xenobiotics accumulate mostly in the liver, from where they are transported to the muscles and the brain, where the highest bioaccumulation factor is reached by endrin and pp’-DDT. Conceivably, the older the penguin, the higher is the concentration level of pesticides in its liver and brain. Molting was found to be the most effective way of eliminating mercury, dieldrin and methoxychlor from the system. Insecticides, such as DDT and its metabolites, were removed most effectively by females through laying of eggs. The standard four eggs laid within a year may have contained up to 20 % of the total amount of pesticides which had been absorbed with food, but no more than 5 % of mercury.

Recently, metal nanoparticles have attracted attention as promising peroxygen activators for the rapid and effective remediation of organic contaminants. In this work, a one-dimensional physical model experiment was designed to investigate the mobility of the metal nanoparticles in porous media and the potential use of metal nanoparticles as peroxygen activators for in situ treatment of source zones. We found that our synthesized nano-Pd-Fe0 particles were mobile in a non-geological porous medium and relatively immobile in a geological porous medium. In addition, we observed that iron-based bimetallic nanoparticles were able to remain in suspension in an ideal aqueous system much longer (>6 weeks) than iron-based monometallic nanoparticles (<1 h). To overcome the nano-Pd-Fe0 particle delivery issue in geological porous media, an activation zone approach was adopted. Nano-Pd-Fe0 particles were injected in order to create a zone to activate persulfate for the treatment of a trichloroethylene source zone. Trichloroethylene mass destruction was only 9 % higher in the nano-Pd-Fe 0 activated persulfate system compared to the non-activated persulfate system as revealed by a short-duration chloride concentration spike in the effluent. In addition, the nano-Pd-Fe0 activation zone was rapidly deactivated after being exposed to persulfate as visually observed by a color change, indicating that the longevity of the activation zone is limited. © 2013 Springer Science+Business Media Dordrecht.

The sorption behaviors of brilliant blue FCF dye by natural clay and modified with iron chloride were determined. The materials were characterized by X-ray diffraction and scanning electron microscopy, and the zero point charges were also determined. The effects of pH, contact time, dye concentration, and temperature were considered. The results showed that clay does not suffer any important change in its structure after the chemical treatments. The pH influences the sorption of the dye in the unmodified clay, but this effect was not observed in the iron-modified clay. The equilibrium time and the sorption capacity for the unmodified clay were 48 h and 6.16 mg/g, while for the iron-modified clay, 24 h and 14.22 mg/g, respectively. The sorption kinetics results were best adjusted to the pseudo-first-order and pseudo-second-order models. Sorption isotherms were best adjusted to the Langmuir model, indicating that both clays have a homogeneous surface. Thermodynamic parameters (E, ΔS, ΔG and ΔH) were calculated for the natural clay from the data of the sorption kinetics at temperatures between 20 and 50 °C, indicating that the sorption process is exothermic. For the case of the iron-modified clay, it was not possible to calculate these thermodynamic parameters because the sorption capacities were similar in the temperature range selected.

A study was undertaken to assess the extent of mercury contamination in the water and sediment in a seasonal wetland, as well as to determine the relationship between environmental parameters and the distribution of the mercury contamination. Water and sediment samples were collected and analysed for methylmercury, inorganic mercury and other physical and chemical variables. One-way analysis of variance and homogeneity of variance were performed, and linear regression analysis was used to determine correlations between mercury and other environmental variables. The highest mercury concentrations were recorded at the sites located closest to the industrial complex. Methylmercury concentrations in the water and sediment were mostly higher during the low flow season, while inorganic mercury concentrations in the water and sediment were higher during the high flow and low flow seasons, respectively. Chromium, manganese, organic carbon and fine sediment particles were found to have significantly positive correlations with mercury concentrations in water and sediment. It was also found that the mercury concentrations decreased within a relatively short distance from the sites closer to the industrial complex to the sites further downstream.

Parameters known to influence mercury (Hg) release from soils include substrate and air Hg concentration, light, atmospheric oxidants, temperature, and soil moisture. However, for low Hgcontaining soils, the influence of these parameters has been shown to vary across space and time. Here, we expand upon previous work by investigating whether soil-water evaporative loss, which integrates the influence of multiple parameters, could be applied for predicting Hg flux from soil with low Hg concentrations when bare and planted. To investigate our hypothesis, Hg flux was measured from three soil types (<100 ng Hg g-1). When these soils were saturated, flux was suppressed. Soil moisture evaporative stage was used to partition the parameters most important for controlling Hg flux as the soils dried. Classification and regression tree (CART) analyses showed that soil moisture was the most important parameter predicting Hg flux. Results also showed an important predictor for Hg flux was whether actual evaporation (Ea) was equal to potential evaporation (Ep) or Ea < Ep. Depending on evaporative stage, the parameters with the next highest correlation to Hg flux were light, temperature, and soil moisture evaporation rate. The presence of vegetation also influenced flux with lower Hg flux when the plants were transpiring. Results indicate for those developing models that estimate Hg flux from low Hg-containing soils, soil moisture and evaporative stage are useful tools for predicting flux. © Springer Science+Business Media Dordrecht 2013.

Unreclaimed mine tailings sites are a worldwide problem. This study evaluates the potential of Salvia verbenaca for phytoremediation of copper mine tailings treated with technosol and compost. Ecophysiological results reveal the species ability to thrive in the assessed range of conditions, while the hydrogen peroxide assays exhibit the plant’s capacity to successfully respond to metal toxicity, supporting literature reports about its antioxidant capabilities. Furthermore, the results suggest a selective antioxidant response of S. verbenaca towards Cd, indicative of a protection mechanism against high concentrations of this element. Moderate concentrations of Cu in the roots, adequate translocation and bioconcentration factors, tolerance to metal toxicity, and ecophysiological characteristics classify S. verbenaca as a promising candidate for phytostabilization of mine tailings. The importance of the amendments in order to improve the overall phytostabilization performance is highlighted by the elevated correlations between the treatment properties and the extractable concentrations of trace metals.

The growth of white-rot fungus Pleurotus eryngii F032 in a suitable medium can degrade an azo dye Reactive Black 5 (RB5), because of its ability to produce ligninolytic enzymes such as lignin peroxidase (LiP), manganese peroxidase (MnP), and laccase that able to degrade and transform the complex structure of the dye into a less toxic compound. The effect of environmental factors such as initial concentration of Reactive Black 5, pH, temperature of growth medium, surfactant (Tween 80), and agitation were also investigated. The productions of ligninolytic enzymes were enhanced by increasing the white-rot fungi growth in optimum conditions. The decolorization of Reactive Black 5 were analyzed by using UV–vis spectrophotometer at the maximum absorbance of 596 nm. The white-rot fungus, P. eryngii F032 culture exhibited 93.56 % decolorization of 10 mg/L RB5 within 72 h of incubation in dark condition with agitation. The optimum pH and temperature for the decolorizing activity was recorded at pH 3 and 40 °C, respectively. The addition of surfactant (Tween 80) increased the decolorization to 93.57 % and agitation of growth medium at 120 rpm enhanced the distribution of nutrients to the fungus thus optimized the enzymatic reaction that resulted maximum decolorization of RB5 which was 93.57 %. The molecular docking studies were performed using Chimera visualization software as to analyze the decolorization mechanism of RB5 at molecular level.