PURPOSE: The disinfection efficiency of water and secondary treated wastewater by means of photoelectrocatalytic oxidation (PEC) using reference strains of Enterococcus faecalis and Escherichia coli as faecal indicators was evaluated. Operating parameters such as applied potential (2–10 V), initial bacterial concentration (103–107 CFU/mL), treatment time (up to 90 min) and aqueous matrix (pure water and treated effluent) were assessed concerning their impact on disinfection. METHODS: PEC experiments were carried out using a TiO2/Ti film anode and a zirconium cathode in the presence of simulated solar radiation. Bacterial inactivation was monitored by the culture method and real-time SYBR green PCR. RESULTS: A 6.2 log reduction in E. faecalis population was achieved after 15 min of PEC treatment in water at 10 V of applied potential and an initial concentration of 107 CFU/mL; pure photocatalysis (PC) led to only about 4.3 log reduction, whilst negligible inactivation was recorded when the respective electrochemical oxidation process was applied (i.e. without radiation). PEC efficiency was generally improved increasing the applied potential and decreasing initial bacterial concentration. Regarding real wastewater, E. coli was more susceptible than E. faecalis during treatment at a potential of 5 V. Wastewater disinfection was affected by its complex composition and the contained mixed bacterial populations, yielding lower inactivation rates compared to water treatment. Screening the results obtained from both applied techniques (culture method and real-time PCR), there was a discrepancy regarding the recorded time periods of total bacterial inactivation, with qPCR revealing longer periods for complete bacterial reduction. CONCLUSIONS: PEC is superior to PC in terms of E. faecalis inactivation presumably due to a more efficient separation and utilization of the photogenerated charge carriers, and it is mainly affected by the applied potential, initial bacterial concentration and the aqueous matrix.

INTRODUCTION: On August 2006, a cargo ship illegally dumped 500 t of toxic waste containing high concentrations of hydrogen sulphide in numerous sites across Abidjan. Thousands of people became ill. Seventeen deaths were associated with toxic waste exposure. MATERIALS AND METHODS: This study reports on environmental and health problems associated with the incident. A cross-sectional transect study was conducted in five waste dumping site areas. RESULTS: Of the households, 62.1% (n = 502) were exposed to the effects of the pollutants and 51.1% of the interviewed people (n = 2,368) in these households showed signs of poisoning. Most important symptoms were cough (37.1%), asthenia (33.1%), pruritus (29.9%) and nausea (29.1%). DISCUSSION: The health effects showed different frequencies in the five waste impact sites. Among the poisoned persons, 21.1% (n = 532) presented symptoms on the survey day (i.e., 4 months after incident). Transect sampling allowed to determine a radius of vulnerability to exposure of up to 3 km from the point of toxic waste disposal. CONCLUSION: The area of higher vulnerability is influenced by various environmental factors, such as size and severity of pollution site, duration of toxic waste pollution on the impact site and locally climatic conditions. The surveillance of effects on environment and human health is warranted to monitor the development.

PURPOSE: The aim of this study was to prepare a highly active immobilized titania/silica photocatalyst and to test its performance in situ toward degradation of toluene as one of the major toxic indoor contaminants. METHODS: In this work, two different titania layers immobilized on Al sheets were synthesized via low temperature sol–gel method employing presynthesized highly active titania powders (Degussa P25 and Millennium PC500, mass ratio 1:1): (a) with a silica/titania binder and a protective layer and (b) without the binder. The photocatalysts were characterized by X-ray diffraction, nitrogen sorption measurements, scanning electron microscopy (SEM), infrared spectroscopy, and UV–vis diffuse reflectance spectroscopy (DRS). The in situ photocatalytic degradation of gaseous toluene was selected as a probe reaction to test photocatalytic activity and to verify the potential application of these materials for air remediation. RESULTS: Results show that nontransparent highly photocatalytically active coatings based on the silica/titania binder and homogeneously dispersed TiO2 powders were obtained on the Al sheets. The crystalline structure of titania was not altered upon addition of the binder, which also prevented inhomogeneous agglomeration of particles on the photocatalyst surface. The photoactivity results indicate that the adsorption properties and photocatalytic activity of immobilized photocatalysts with the silica/titania binder and an underlying protective layer were very effective and additionally, they exhibited considerably improved adhesion and uniformity. CONCLUSION: We present a new highly photocatalytically active immobilized catalyst on a convenient metallic support, which has a potential application in an air cleaning device.

PURPOSE: The objective of this study was to determine the removal of zinc and copper by two freshwater green microalgae Chlorella pyrenoidosa and Scenedesmus obliquus and to investigate changes of algal ultrastructure and photosynthetic pigment. METHODS: Algal cells were exposed for 8 days to different initial zinc or copper concentrations. Heavy metal concentrations were detected by an atomic absorption spectrophotometer. Algal growth, ultrastructure, and photosynthetic pigment were analyzed by a microplate reader, transmission electron microscope, and spectrophotometer, respectively. RESULTS: Low zinc and copper concentrations induced increase in algal growth, whereas application of high zinc and copper concentrations suppressed the growth of both algae. High metal concentrations also decreased the photosynthetic pigments and destroyed algal cell ultrastructure. The zinc removal efficiency by both algae increased rapidly during the first day and thereafter remained nearly constant throughout the experiment. The copper removal efficiency by both algae increased slowly during the whole experimental periods. In all cultures, the quantity of both metals removed intracellularly was much lower than the adsorbed quantity on the cell surface. CONCLUSIONS: Both strains of the microalgae had proven effective in removing zinc and copper from aqueous solutions, with the highest removal efficiency being near 100%. In addition, C. pyrenoidosa appeared to be more efficient than S. obliquus for removing copper ions. On the contrary, S. obliquus appeared to be more efficient than C. pyrenoidosa for removing zinc ions.

Twenty-five sampling stations were selected in order to monitor persistent organic pollutants (polycyclic aromatic hydrocarbons (PAHs), organochlorine (OC) pesticides and total polychlorinated biphenyls (PCBs)) in surface water from Kerkini Lake, the Strymon River, its main tributaries and estuary in N. Aegean Sea during January to July, 2008, according to recent European Union (EU) guidelines. The data were divided among the high (January to April) and the low flow season (May to July). Generally, the values for organic pollutants were within the range reported worldwide for surface water. Elevated PAHs concentrations were observed compared with other places in Greece. Anthracene and benzo(a)pyrene exceeded maximum allowable concentration (MAC) of the relative EU guideline. Also, concentrations above MAC were observed for OCs, γ-HCH, and a-endosulfan. Despite the fact that it is banned since 1972, Aldrin was detected during the monitoring season (from limit of detection (LOD) to 15 ng L−1). Total PCB concentrations ranged from LOD to 162 ng L−1. In addition, the load of organic pollutants was estimated in April (high flow) and June (low flow) in selected sampling stations. According to this estimation, napthalene, anthracene, and fluoranthene (PAHs), total dichlorodiphenyltrichloroethane (DDT), aldrin, and total PCBs had the highest load. Taking into account the relative EU guidelines concerning the pollutants studied, the water quality in the Strymon River catchment could be characterized as poor, which can lead to negative impacts to its biota.

Binding of heavy metal ions by calcium alginate has been described in the literature with many different models. In the present study, two most basic models were used to systematically compare their simultaneous description of metal uptake dependence on pH and metal ion concentration in the bulk solution. The experimental datasets corresponding to the binary sorption systems containing protons and heavy metal ion (cadmium, lead, or copper) were taken from the literature. The applicability and limitations of both models are discussed. Neither of the models gave a completely satisfactory description of all data. The two-site occupancy model yielded better results compared to the one-site occupancy model when considering the coherence of the parameters (e.g., affinity constants) but the quality of the obtained fits is similar in both cases.

The environmental fate of transformation products from organic pollutants such as drugs has become a new research area of increasing interest over the last few years. Whereas in the past mainly parent compounds or their major human metabolites were studied, new questions have arisen what compounds could be formed during incomplete degradation in the aquatic environment and what effects the resulting transformation products might have on nature and mankind. Psychiatric drugs are among the most important prescription drugs worldwide, but so far only little data is provided upon their degradation behavior. This especially accounts for tricyclic antipsychotic drugs of the phenothiazine class. Therefore, the degradation of such drugs was investigated in this study. In this study the aerobic Closed Bottle test (The Organisation for Economic Co-operation and Development (OECD) 301D) was used to assess the ready biodegradability of three trifluoromethylated phenothiazine drugs: fluphenazine, triflupromazine, and trifluoperazine. As it is known from literature that phenothiazine drugs can easily form various photolytic transformation products under light exposure, photochemical transformation was also investigated. Since transformation products are usually not available commercially, the calculation of environmental parameters with the aid of quantitative structure activity relationship (QSAR) software was used for first evaluation of these compounds. According to the OECD test guideline, all trifluoromethylated phenothiazines had to be classified as not readily biodegradable. Chromatographic data revealed the formation of some transformation products. Comparing retention time and mass spectrometric data with the analytical results of the light exposure experiments, we found peaks with the same retention time and mass spectra. So these transformation products were not of bacterial, but photolytic, origin and are formed very quickly even under low light doses. A special chromatographic column and solvent gradient along with multiple stage mass spectrometric fragmentation experiments uncovered the presence of, in total, nine photolytic transformation products and allowed for their structural elucidation. Typical modifications of the molecules were sulfoxidation, exocyclic N-oxidation, and transformation of the trifluoromethyl to a carboxylic moiety. The obtained results of the QSAR calculations show that all transformation products are highly mobile in the aquatic environment and elimination through biotic or abiotic pathways cannot be expected. Transformation products of trifluoromethylated phenothiazine drugs have to be expected in the aquatic environment, yet nothing is known about their toxicological properties. Therefore, further risk assessment upon these drugs and their fate is strongly recommended.

BACKGROUND: The continuous progress in analytical techniques has improved the capability of detecting chemicals and recognizing new substances and extended the list of detectable contaminants widespread in all environmental compartments by human activities. Most concern is focused on water contamination by emerging compounds. By contrast, scarce attention is paid to the atmospheric sector, which in most cases represents the pathway of diffusion at local or global scale. Information concerning a list of organic pollutants is provided in this paper. METHODS: The volatile methyl tert-butyl ether and siloxanes are taken as examples of information insufficient with regard to the potential risk induced by diffusion in the atmosphere. Illicit drugs, whose presence in the air was ascertained although by far unexpected, are considered to stress the needs of investigating not solely the environmental compartments where toxic substances are suspected to display their major influence. Finally, the identification of two recognized emerging contaminants, i.e., tris(2-chloroisopropyl) phosphate and N,N-diethyl-m-toluamide, in aerosols originally run to characterize other target compounds is presented with the purpose of underlining the wide diffusion of the organic emerging contaminants in the environment.

PURPOSE: In the reservoir created in the reclaimed land in Isahaya Bay, Japan, Microcystis aeruginosa, which produces microcystins (MCs), bloomed every year, and the water with high levels of MCs in the reservoir has been often drained to Isahaya Bay to adjust the water level. The principal aims of this study are to clarify the water conditions suitable for blooming of M. aeruginosa in the reservoir, to follow the amount of distribution of MCs inside and outside the reservoir, and to discuss how blooming of M. aeruginosa is controlled in the reservoir and how MCs produced by Microcystis spread or accumulate in the aquatic environment. METHOD: We monitored the water quality (temperature, salinity, dissolved inorganic nitrogen (DIN), and dissolved inorganic phosphorus) in the reservoir with seasonal blooming of microalgae including phytoplankton and M. aeruginosa using the concentrations of chlorophyll α and MCs, respectively, and collected the surface sediment in the reservoir and the bay to determine the MC content using the ELISA method. RESULT: M. aeruginosa bloomed in extremely low DIN conditions of the water in warm seasons (spring and late summer to autumn). The year-mean standing stock of MCs was approximately 34.5 kg in the water and 8.4 kg in the surface sediment in the reservoir. Approximately 64.5 kg of MCs was discharged with the effluent to the bay in a year. CONCLUSION: Since a large amount of MCs always suspends in the water in the reservoir and it has been discharged to the bay, suspension-feeding animals are exposed most seriously to the high levels of MCs occurring in these areas. We need to pay attention to the danger of widespread dispersal of MCs and biological concentration of MCs by fish and clam inside and outside the reservoir.

INTRODUCTION: The removal of azo Reactive Red 31(RR31) from synthetic dye solution using tannery sludge-developed activated carbon (TSC) was investigated. METHODS: TSC was prepared from a combination of physical and chemical activation. The developed TSC was characterized by FT-IR, SEM, TG–DTA, specific surface area and zero point charge of pH (pHzpc). The isotherm models, kinetic models and thermodynamic parameters were also analysed to describe the adsorptive behaviour of TSC. The effect of contact time, initial dye concentration, carbon dosage, agitation speed, initial pH and temperature were carried out for batch adsorption studies. The isotherm plot of the dye RR31 on TSC fitted better with the Langmuir adsorption isotherm than the Freundlich model. RESULTS: The maximum monolayer adsorption capacity of TSC in the removal of RR31 ranged from 23.15 to 39.37 mg/g. The thermodynamic parameters showed the endothermic and physical nature of the Reactive Red 31 adsorption on TSC. The entropy and enthalpy values were 181.515 J/Kmol and 5.285 kJ/mol, respectively. CONCLUSION: The developed cationic tannery sludge carbon was found to be an effective adsorbent in the removal of the anionic azo reactive dye RR31.