The emergence of inorganic and organic contaminants has raised great concerns owing to their adverse impact on human health and ecological security. Herein, first time one-pot process was applied for chitosan (CS) functionalization using graphene oxide (GO) and ethylenediaminetetraacetic acid (EDTA) for simultaneous capturing of toxic inorganic (lead (Pb²⁺) and cadmium (Cd²⁺)) and organic (ciprofloxacin (CIP) and sildenafil (SDF)) contaminants from wastewater. In this approach, we believe that CS would work as a backbone, GO would capture both inorganic and organic contaminants via electrostatic interactions, while EDTA would make complexation with heavy metals. Various parameters including pH, reaction time, concentration, reusability etc. were evaluated to achieve the best experimental result in monocomponent system. The prepared adsorbent displayed an excellent monolayer adsorption capacity of 351.20 and 264.10 mg g⁻¹ for Pb²⁺ and Cd²⁺, respectively, while a heterogeneous sorption capacity of 75.40 and 40.90 mg g⁻¹ for CIP and SDF, respectively. The kinetics data fitted well to Pseudo-second order (PSO) kinetics model for both types of contaminants and gave faster interaction towards metal ions (higher k₂) than organic contaminants. Experimental results showed excellent adsorption efficiencies at environmental levels in the capturing of both inorganic and organic contaminants at the same time from polluted water. The capturing mechanism of both types of contaminants was explained by elemental mapping, EDS, and FT−IR spectra. Overall, easy synthesis, excellent capturing capacity, and reusability imply that the prepared adsorbent has a sufficient potential for the treatment of co-existing toxic contaminants in water.

Xiangjiang (XJ) is a typical urban inland river that serves as a drinking water source, which may be affected by the currently used organochlorine pesticides (CUOCPs) originating from agricultural activities in the vicinity. On this basis, this study comprehensively explored the occurrence and distribution characteristics of CUOCPs in surface water and sediments under long-term precipitation and subsequent floods. Considering the low concentration of CUOCPs in water, a technique combining high-throughput organic analysis with high-volume solid phase extraction (High-throat/Hi-volume SPE) was introduced for effective analysis of CUCOPs. The results showed that the concentration of CUOCPs in the water and sediments of XJ ranged from 2.33 to 6.40 ng L⁻¹ (average of 3.93 ± 1.15 ng L⁻¹) and from 1.52 to 21.2 ng g⁻¹ (average of 6.60 ± 4.31 ng g⁻¹ dw), respectively. The distribution of CUOCPs in water was consistent throughout XJ, but that in sediments was not uniform, indicating a stronger impact of floods on water than on sediments. Water-sediment partition coefficients were generally >2 L g⁻¹, showing a tendency of CUOCP dominance in sediments. The results of principal component analysis and cluster analysis showed that the occurrence of CUOCPs is significantly affected by exogenous disturbance, which could be flood events; meanwhile, clusters of CUOCPs were found in both water and sediments in the source-limited middle reaches in urban areas. Redundancy analysis (RDA) showed that CUOCP occurrences were not positively correlated with nutrient elements (nitrogen and phosphorus), but related to pH and dissolved oxygen (DO), indicating complex sources.

This study aims at exploring size distribution, meteorological influence and uncertainty for source-specific risks of atmospheric particulate matter (PM), which can improve risk-mitigation strategies for health protection. Heavy metals (HMs) and polycyclic aromatic hydrocarbons (PAHs) in PM₂.₅ and PM₁₀ were detected in a Chinese megacity during 2011–2021. A new method named as PMFBMR, which combines the Positive Matrix Factorization, Bootstrapping, Mote Carlo and Risk assessment model, was developed to estimate uncertainty of source-specific risks. It was found that PAH risks concentrated in fine PM, while HMs showed high risks in both fine and coarse PMs. For PM₂.₅, HQ (non-cancer risk hazard quotient) of gasoline combustion (GC), diesel and heavy oil combustion (DC), coal combustion (CC), industrial source (IS), resuspended dust (RD) and secondary and transport PM (ST) were 0.6, 1.4, 0.9, 1.6, 0.3, and 0.3. ILCR (lifetime cancer risk) of sources were IS (9.2E-05) > DC (2.6E-05) = CC (2.6E-05) > RD (2.2E-05) > GC (1.7E-05) > ST (6.4E-06). PM₂.₅ from GC, DC, CC and IS caused higher risks than coarse PM, while coarse PM from RD caused higher risks. Source-specific risks were influenced not only by emissions, but also by meteorological condition and dominant toxic components. Risks of GC and DC were usually high during stable weather. Some high risks of CC, IS and RD occurred at strong WS due to transport or wind-blown resuspension. GC and DC risks (influenced by both PAHs and HMs) showed strong relationship with T, while IS and RD risks (dominated by HMs) showed weak link with meteorological conditions. For uncertainty of source-specific risks, HQ and ILCR were sensitive for different variables, because they were dominated by components with different uncertainties. When using source-specific risks for risk-mitigation strategies, the focused toxic components, used toxic values, PM sizes and uncertainty are necessary to be considered.

Considerable investigations have been carried out to address the relationship between ambient fine particulate matter (PM₂.₅) and blood pressure (BP) in patients with hypertension. However, few studies have explored the influence of PM₂.₅ and its constituents on Trimethylamine N-oxide (TMAO), an established risk factor for hypertension and cardiovascular disease (CVD), particularly in severely air-polluted areas. To explore the potential impact of PM₂.₅ constituents on BP, plasma hormones, and TMAO, a panel study was conducted to investigate changes in BP, plasma hormones, and TMAO in response to ambient air pollution exposure in stage 1 hypertensive young adults. Linear mixed effect models were used to estimate the cumulative effects of fine particulate matters (PM₂.₅) and its constituents on BP, plasma hormones and TMAO. We found that one interquartile range (IQR) (35 μg/m³) increase in 0–1 day moving-average PM₂.₅ concentrations was statistically significantly associated with elevated systolic blood pressure (SBP), diastolic blood pressure (DBP), and mean arterial pressure (MAP) with estimated values of 0.13 (95% confidence interval (CI): 0.03 to 0.23) mmHg, 0.18 (95% CI: 0.08 to 0.28) mmHg, and 0.17 (95% CI: 0.09 to 0.26) mmHg, respectively. Hormone disturbance in the renin-angiotensin-aldosterone system was also associated with PM₂.₅ exposure. Elevated TMAO levels with an IQR increase for 0–4, 0–5, 0–6 moving-average concentrations of PM₂.₅ were found, and the increased values ranged from 26.28 (95% CI: 2.92 to 49.64) to 60.78 (31.95–89.61) ng/ml. More importantly, the PM₂.₅-bound metal constituents, such as manganese (Mn), titanium (Ti), and selenium (Se) showed robust associations with elevated BP and plasma TMAO levels. This study demonstrates associations between PM₂.₅ metal constituents and increased BP, changes in plasma hormones and TMAO, in stage 1 hypertensive young adults. Source control, aiming to reduce the emission of PM₂.₅-bound metals should be implemented to reduce the risk of hypertension and CVD.

In situ remediation technology applied aims to not only decrease cadmium (Cd) and arsenic (As) uptake by rice but also improve soil health and rice quality in contaminated paddy soils. Here the effects of a combined amendment, consisting of limestone, iron powder, silicon fertilizer, and calcium-magnesium-phosphate fertilizer, with three application rates (0, 450, and 900 g m⁻²) on soil health, rice root system, and brown rice quality were compared in moderately versus highly Cd and As co-contaminated paddy fields. After the amendment application, soil pH, cation exchange capacity, four kinds of soil enzyme activities increased (sucrase, urease, acid phosphatase, and catalase), and concentrations of leached Cd/As decreased, as measured by the DTPA (diethylene triamine pentaacetic acid) and TCLP (toxicity characteristic leaching procedure). Changes in the above soil indicators promoted soil health. In both fields, the dithionite-citrate-bicarbonate (DCB)-Fe and DCB-Mn concentration in iron plaque increased and root length became longer. Changes in the above root system indicators reduced the root system's absorption of Cd and As but increased that of nutrients. Under 900 g m⁻² treatment, the Cd concentration in brown rice of two sites decreased by 55.8% and 28.9%, likewise inorganic As (iAs) decreased by 50.0% and 21.1%, whereas essential amino acids increased by 20.4% and 20.0%, respectively. Furthermore, the Cd and iAs concentrations in brown rice were <0.2 mg kg⁻¹ (maximum contaminant level of Cd and iAs in the Chinese National Food Safety Standards GB2762-2017 for brown rice) under the 900 g m⁻² in the moderately contaminated field. These results suggest the combined amendment can improve soil health and brown rice quality in the moderately and highly Cd- and As-co-contaminated paddy soils, offering potential eco-friendly and efficient remediation material for applications in such polluted paddy soils.

Fumonisin B1 (FB1) is a neurodegenerative mycotoxin synthesized by Fusarium spp., but the potential neurobehavioral toxicity effects in organisms have not been characterized clearly. Caenorhabditis elegans (C. elegans) has emerged as a promising model organism for neurotoxicological studies due to characteristics such as well-functioning nervous system and rich behavioral phenotypes. To investigate whether FB1 has neurobehavioral toxicity effects on C. elegans, the motor behavior, neuronal structure, neurotransmitter content, and gene expression related with neurotransmission of C. elegans were determined after exposed to 20–200 μg/mL FB1 for 24 h and 48 h, respectively. Results showed that FB1 caused behavioral defects, including body bends, head thrashes, crawling distance, mean speed, mean amplitude, mean wavelength, foraging behavior, and chemotaxis learning ability in a dose-, and time-dependent manner. In addition, when C. elegans was exposed to FB1 at a concentration of 200 μg/mL for 24 h and above 100 μg/mL for 48 h, the GABAergic and serotonergic neurons were damaged, but no effect on dopaminergic, glutamatergic, and cholinergic neurons. The relative content of GABA and serotonin decreased significantly. Furthermore, abnormal expression of mRNA levels associated with GABA and serotonin were found in nematodes treated with FB1, such as unc-30, unc-47, unc-49, exp-1, mod-5, cat-1, and tph-1. The neurobehavioral toxicity effect of FB1 may be mediated by abnormal neurotransmission of GABA and serotonin. This study provides useful information for understanding the neurotoxicity of FB1.

Cropland contamination by toxic trace metal (loid)s (TTMs) has attracted increasing attention due to the serious consequential threat to crop quality and human health. Mitigation of plant TTM stress by silica amendment has been proposed recently. However, the relationship between the siliceous structure of phytoliths and TTMs in plants, and the environmental implications of phytolith-occluded trace metal (loid)s (PhytTMs) remain unclear. This study assessed the accumulation of five metal (loid)s, including lead (Pb), zinc (Zn), cadmium (Cd), copper (Cu) and arsenic (As), in the organic tissues and phytoliths of wheat grown in a mixed-TTM contaminated soil under both lightly and heavily contaminated conditions. The results show that the concentrations of plant TTMs and PhytTMs were significantly (p < 0.05) positively correlated, and higher in heavily contaminated wheats than those in lightly contaminated ones. The bio-enrichment factors between phytoliths and organic tissues were higher for As (1.83), Pb (0.27) and Zn (0.30) than for Cd (0.03) and Cu (0.14), implying that As, Pb and Zn were more readily co-precipitated with silicon (Si) in phytolith structures than Cd and Cu. Network analysis of the relationship between soil and plant elements with PhytTMs showed that severe contamination could impact the homeostasis of elements in plants by altering the translocation of TTMs between soils, plants, and phytoliths. The accumulation of TTMs in phytoliths was affected by the capacity of Si deposition in tissues and chelation of TTMs with silica, which could impact the role of PhytTMs in global biogeochemical TTM cycles.

To reduce the high disease burden caused by air pollution, World Health Organization (WHO) issued a new air quality guideline (AQG) on the 22nd September 2021. A timely quantitative assessment of health benefits by meeting these targets is a key measure to advocate and inform national and regional disease control policies. We collected daily major air pollution data in 315 Chinese cities from the 1st January to the 31st December 2019, and the corresponding annual population and mortality rate in the whole population of each city. Then, the mortality benefits were estimated when daily air pollution levels attained WHO's new AQG targets (15 μg/m³ for PM₂.₅, 25 μg/m³ for NO₂ and 100 μg/m³ for O₃) in 315 Chinese cities and 31 provinces by using pollutant- and cause-specific concentration-response functions. In total, 134,025 (95%CI: 92,768; 173,029) air pollution-associated non-accidental deaths could be avoided in 315 Chinese cities in 2019 by attaining WHO's new AQG targets, with 43,800 (95%CI: 29,945; 55,616) avoidable deaths from PM₂.₅, 58,070 (95%CI: 45,333; 70,714) from NO₂, and 32,155 (95%CI: 17,490; 46,699) from O₃. Cardiovascular diseases and respiratory diseases accounted for 72,698 (95%CI: 46,561; 101,680) and 17,726 (95%CI: 8603; 26,925) avoidable deaths, respectively. Health benefits from reduction in air pollution levels were 99.26 avoided non-accidental deaths per million population at national level, ranging from 12.48 per million in Tibet to 166.26 per million in Hebei. These findings suggest that the compliance with the WHO updated AQG standards would save substantial amount of air pollution-related premature deaths in China. More stringent air pollution control and management measures are urgently warranted to reduce the disease burden from air pollutants in China, particularly for the worsening O₃ pollution.

Dichlorophenol (DCP), a commonly used fungicide and insecticide, is widely found in waters and wastewaters. Herein, the degradation of DCP by Ferrate (Fe(VI)) in different matrices was comprehensively investigated. In pure water, a complete removal of DCP was achieved in 300 s at [Fe(VI)]:[DCP] molar ratio of 2:1. The presence of HA (10 mg L⁻¹) inhibited DCP degradation to a certain extent. A total of twenty degradation products were identified by HPLC/MS analysis. Based on these products, reaction pathways including the cleavage of C–C bridge bond, hydroxylation, and radical coupling were proposed. These reaction mechanisms were further rationalized by theoretical calculations. The analyses of Wiberg bond orders and transition state indicated that C₇–C₈ bond was the most vulnerable site for cleavage, and C₁₂ site was the most likely site for hydroxyl addition. Mulliken atomic spin densities distribution suggested that self-coupling products was easily generated via C–O–C coupling ways. Finally, the feasibility of applying Fe(VI) to degrade DCP (20 μM) in a municipal wastewater effluent and a lake water was evaluated and verified. The findings in this study are of relevance in designing Fe(VI)-based treatment strategy for chlorine-containing persistent pesticides.