'In connection with the Taparura Project, we studied the distribution of phytoplankton and zooplankton communities in relation to environmental variables at 18 stations sampled during four coastal cruises conducted between October 2009 and July 2010 on the north coast of Sfax (Tunisia, western Mediterranean Sea). The inshore location was largely dominated by diatoms (66 %) represented essentially by members of the genera Navicula, Grammatophora, and Licmophora. Dinophyceae were numerically the second largest group and showed an enhanced species richness. Cyanobacteriae developed in association with an important proliferation of colonial Trichodesmium erythraeum, contributing 39.4 % of total phytoplankton abundances. The results suggest that phytoplankters are generally adapted to specific environmental conditions. Copepods were the most abundant zooplankton group (82 %) of total zooplankton. A total of 21 copepod species were identified in all stations, with an overwhelming abundance of Oithona similis in autumn and summer, Euterpina acutifrons in winter, and Oncaea conifera in spring. The phosphogypsum restoration had been acutely necessary allowing dominant zooplankton species to exploit a wide range of food resources including phytoplankton and thus improving water quality.

The consumption of halieutic products has many health benefits. However, their contaminants loads need to be addressed to better understand the risk from consuming these products. The aquatic biota from the Baie des Chaleurs in New Brunswick is contaminated by cadmium, zinc and lead. In spite of this, no study has examined the heavy metal concentrations in commercial halieutic products sold in this Canadian region. The objective of this pilot study was to characterize the species and origin of fish and seafood sold in the Baie des Chaleurs region by using an ecosystemic approach. Additionally, a baseline picture of the heavy metal levels found in these products has been determined. In 2008, interviews were carried out in markets located in the Baie des Chaleurs area. Species that were identified as the most purchased were then bought for analysis. Samples were freeze-dried and homogenized before nitric acid digestions. Aluminum, copper, cadmium, iron, manganese, and zinc concentrations were determined by inductively coupled plasma optical emission spectrometry. Results show that 36 % of seafood species sold in markets were caught in the Baie des Chaleurs. Lobsters, shrimps, scallops and oysters are the most purchased species regardless of the season. High amounts of cadmium exceeding tolerable daily intake are found in lobster hepatopancreas and can cause deleterious effects on health, in particular in vulnerable populations such as children and heavy consumers. The ecosystemic approach to health used in this pilot study shows the feasibility of an exhaustive study on the exposure of coastal population to heavy metal from fish and seafood consumption and the source of halieutic products sold in markets.

Photocatalytic degradation of dissolved organic carbon (DOC) by utilizing Fe(III)-doped TiO2 at the visible radiation range is hereby reported. The photocatalyst was immobilized on sintered glass frits with the coating done by wet method, calcinated at 500 °C and then applied in a photodegradation reactor. The addition of a transition metal dopant, Fe(III), initiated the red shift which was confirmed by UV-Vis spectroscopy, and the photocatalyst was activated by visible radiation. X-ray diffraction patterns showed that Fe(III) doping had an effect on the crystallinity of the photocatalysts. Mixtures of DOC and associated coloured solutions were degraded in first-order kinetics, showing that the degradation process was not dependent on intermediates or other species in solution. A reactor with a catalyst coating area of 12.57 cm(2) was able to degrade 0.623 mg of the dissolved material per minute. Exposure of the reactor to hostile acidic conditions and repeated use did not compromise its efficiency. It was observed that the reactor regenerates itself in the presence of visible light, and therefore, it can be re-used for more than 100 runs before the performance dropped to <95 %. The results obtained indicate that the photocatalyst reactor has a great potential of application for use in tandem with biosorbent cartridges to complement water purification methods for domestic consumption.

Three multiple input and multiple output-type fuzzy-logic-based models were developed as an artificial intelligence-based approach to model a novel integrated process (UF–IER–EDBM–FO) consisted of ultrafiltration (UF), ion exchange resins (IER), electrodialysis with bipolar membrane (EDBM), and Fenton’s oxidation (FO) units treating young, middle-aged, and stabilized landfill leachates. The FO unit was considered as the key process for implementation of the proposed modeling scheme. Four input components such as H₂O₂/chemical oxygen demand ratio, H₂O₂/Fe²⁺ ratio, reaction pH, and reaction time were fuzzified in a Mamdani-type fuzzy inference system to predict the removal efficiencies of chemical oxygen demand, total organic carbon, color, and ammonia nitrogen. A total of 200 rules in the IF–THEN format were established within the framework of a graphical user interface for each fuzzy-logic model. The product (prod) and the center of gravity (centroid) methods were performed as the inference operator and defuzzification methods, respectively, for the proposed prognostic models. Fuzzy-logic predicted results were compared to the outputs of multiple regression models by means of various descriptive statistical indicators, and the proposed methodology was tested against the experimental data. The testing results clearly revealed that the proposed prognostic models showed a superior predictive performance with very high determination coefficients (R ²) between 0.930 and 0.991. This study indicated a simple means of modeling and potential of a knowledge-based approach for capturing complicated inter-relationships in a highly non-linear problem. Clearly, it was shown that the proposed prognostic models provided a well-suited and cost-effective method to predict removal efficiencies of wastewater parameters prior to discharge to receiving streams.

Carbonised beet pulp (BPC) produced from agricultural solid waste by-product in sugar industry was used as adsorbent for the removal of Remazol Turquoise Blue-G 133 (RTB-G 133) dye in this study. The kinetics and equilibrium of sorption process were investigated with respect to pH, temperature and initial dye concentration. Adsorption studies with real textile wastewater were also performed. The results showed that adsorption was a strongly pH-dependent process, and optimum pH was determined as 1.0. The maximum dye adsorption capacity was obtained as 47.0 mg g⁻¹at the temperature of 25 °C at this pH value. The Freundlich and Langmuir adsorption models were used for describing the adsorption equilibrium data of the dye, and isotherm constants were evaluated depending on sorption temperature. Equilibrium data of RTB-G 133 sorption fitted very well to the Freundlich isotherm. Mass transfer and kinetic models were applied to the experimental data to examine the mechanisms of adsorption and potential rate-controlling steps. It was found that both external mass transfer and intra-particle diffusion played an important role in the adsorption mechanisms of dye and adsorption kinetics followed the pseudo second-order type kinetic model. The thermodynamic analysis indicated that the sorption process was exothermic and spontaneous in nature.

The potential of the microbial communities present in the intertidal zone of an unimpacted beach (a beach that did not suffer any significant oil spill) to degrade hydrocarbons was investigated. For that, laboratory-based microcosms (50-ml flasks) were set up with sandy beach sediment spiked with crude oil and incubated with local seawater for 15 days in the dark. Three bioremediation treatments were tested (biostimulation (BS), autochthonous bioaugmentation (AB), and combined treatment of biostimulation + bioaugmentation (BS + AB)) and the results were compared with natural attenuation (NA). Visual inspection showed clearly an oil solubility increase (confirmed by a higher hydrocarbons concentration in supernatant solutions) for all tested treatments when compared to NA. Significant degradation of the oil, shown by different profiles of petroleum hydrocarbons, was also observed for the different treatments particularly for BS + AB. Therefore, the microbial community of this unimpacted beach sediment could respond to an oil spill, degrading hydrocarbons. But to increase the natural attenuation pace, obtained results indicated that BS + AB is an appropriate approach for the bioremediation of beaches recently impacted by an oil spill. The autochthonous microbial cultures can be obtained “before” or “after” the contamination of the target site, being inoculated into the site right after it contamination.

This study evaluates the behavior of coconut charcoal (AC) to adsorb Cr(VI), As(III), and Ni(II) in mono- and multicomponent (binary and ternary) systems. Batch experiments were carried out for mono- and multicomponent systems with varying metal ion concentrations to investigate the competitive adsorption characteristics. The adsorption kinetics followed the mechanism of the pseudo-second-order equation in both single and binary systems, indicating chemical sorption as the rate-limiting step of adsorption mechanism. Equilibrium studies showed that the adsorption of Cr(VI), As(III), and Ni(II) followed the Langmuir model and maximum adsorption capacities were found to be 5.257, 0.042, and 1.748 mg/g, respectively. In multicomponent system, As(III) and Ni(II) adsorption competed intensely, while Cr(VI) adsorption was much less affected by competition than As(III) and Ni(II). With the presence of Cr(VI), the adsorption capacities of As(III) and Ni(II) on AC were higher than those in single system and the metal sorption followed the order of Ni(II) > As(III) > Cr(VI). The results from the sequential adsorption–desorption cycles showed that AC adsorbent held good desorption and reusability.

Bioavailable concentrations of polycyclic aromatic hydrocarbons (PAHs) were investigated in water of Three Gorges Reservoir (TGR) using semipermeable membrane devices during the period of completely impounding water. ∑PAH concentrations in water of TGR in the period of completely impounding water were 15-381 ng L(-1). ∑PAH concentrations increased from town or counties to big industrialized cities in TGR, indicating urbanization effects on PAH pollution in the water. Tributaries in TGR have a certain contribution of PAH pollution to the mainstream of Yangtze River and their pollution could not be neglected. An obvious decrease of PAH concentration was observed after 175-m water impounding in 2011 in TGR. Several factors may account for this decrease, including execution of comprehensive treatment and management measures in TGR, less rainfall in 2011, and sedimentation effect caused by the dam. Passive sampling method has been successfully applied in the investigation of trace PAH in water of TGR and proved to be a useful and efficient tool for the management and sustainable development of the big reservoir. The results of the study provide valuable information about PAH pollution in the whole reservoir including some tributaries, and the pollution status is dynamically related with human activities. Therefore, PAH could be used as a marker compound or indicator in the network monitoring system to surveil and trace the pollution status in TGR.

Intensive remediation of abandoned former organochlorine pesticides (OCPs) manufacturing areas is necessary because the central and surrounding soils contaminated by OCPs are harmful to crop production and food safety. Organochlorine and its residues are persistent in environments and difficult to remove from contaminated soils due to their low solubility and higher sorption to the soils. We performed a comprehensive study on the remediation of OCPs-contaminated soils using thermal desorption technique and solvent washing approaches. The tested soil was thermally treated at 225, 325, 400, and 500 °C for 10, 20, 30, 45, 60, and 90 min, respectively. In addition, we tested soil washing with several organic solvents including n-alcohols and surfactants. The optimal ratio of soil/solvent was tested, and the recycling of used ethanol was investigated. Finally, activities of polyphenol oxidase (PPO), urease (URE), alkaline phosphatase, acid phosphatase (ACP), and invertase (INV) were assayed in the treated soils. The tested soil was thermally treated at 500 °C for 30 min, and the concentration of contaminants in soil was decreased from 3,115.77 to 0.33 mg kg⁻¹. The thermal desorption in soil was governed by the first-order kinetics model. For the chemical washing experiment, ethanol showed a higher efficiency than any other solvent. Using a 1:20 ratio of soil/solvent, the maximum removal of OCPs was achieved within 15 min. Under this condition, approximately 87 % of OCPs was removed from the soils. More than 90 % of ethanol in the spent wash fluid could be recovered. Activities of some enzymes in soils were increased after ethanol treatment. But ALP, ACP, and INV activities were decreased and PPO and URE showed slightly higher activities following remediation by thermal treatment. Both heating temperature and time were the key factors for thermal desorption of OCPs. The n-alcohol solvent showed higher removal of OCPs from soils than surfactants. The highly efficient removal of OCPs from soil was achieved using ethanol. More than 90 % of ethanol could be recovered and be reused following distillation. This study provides a cost-effective and highly efficient way to remediate the OCPs-contaminated soils.