Contaminated marine sediments from Cantabrian estuaries have been compacted and fired to produce sintered ceramic materials. The effect of sintering on the leaching behaviour has been investigated by means of the comparison of concentrations of species proposed by the European Waste Landfill Directive present in leachates and regulatory limits for them. The impact of the specimens on the environment is assessed. In order to reach this objective, unfired and fired samples of marine sediments and clay were subjected to the Compliance Leaching Standard Tests EN 12457 1-2 using different liquid to solid ratios (L/S = 2 and 10). The concentrations of Se, As, Cr, Sb, Zn, Cd, Pb, Ni, Ba, Mo, Cu, fluoride, chloride and sulphate in leachates were analyzed, and the results compared with regulatory limits collected in 2003/33/CE Directive. The results revealed that the firing process decreases the leaching of the species analyzed, except for As. The comparison of the metal and metalloid concentrations in leachates and regulatory limits showed that all species fulfilled them, excepting As, fluoride, chloride and sulphate in unfired specimens. Thus, the potential environmental risk in relation to the leaching behaviour associated to the sintered contaminated marine sediments can be considered to be low versus to commercial clay. | This work was conducted under the framework of the Spanish Ministry of Education and Science Projects CTM 2005-07282-C03/3 and CTM 2006-07960. R. Alonso-Santurde was funded by the Spanish Ministry of Education and Science by means of an F.P.I. fellowship.

Interdisciplinary studies on aquatic environments and cross-validation of laboratory vs. field results will likely increase the need for simultaneous use of large- and small-scale ultrafiltration systems. In this study, a comparison of two ultrafiltration systems differing in scale (PrepScale and PelliconXL, Millipore; membrane areas 0.54 m² and 0.005 m², respectively), was made for the cut-offs 3 and 300 kDa. Large systems are useful for their high permeate throughput, while small systems are necessary when the amount of sample is limited. The ability of PrepScale and PelliconXL systems to provide comparable results for organic carbon fractionation was studied for polysaccharide solutions and natural freshwaters. In the latter, the colloidal proportions of different trace metals (V, Cr, Mn, Co, Ni, Cu, Sb, and U) were also determined. Although the colloidal proportions obtained with PelliconXL 3 kDa were sometimes slightly higher than with PrepScale 3 kDa (principally for DOC and U in natural waters), Mann-Whitney statistical test showed no significant difference in the overall fractionation properties of the two systems. Our observations show that reaching high concentration factors lead to a strong modification of colloids size distribution in the range 50-2,000 nm and thus low concentration factors are preferable to preserve the colloid integrity.

Regulators need a reliable, precise and easy to use tool for predicting the occurrence of pesticides in drain water and catchments in agricultural areas. Occurrence depends on a wide range of substance and site specific factors and this study presents a simple model built on the results from simulations of a detailed model system that does not neglect or omit any of these factors. A drainage dominated sub-catchment (0.03 km²) of the Lillebaek catchment (4.4 km²) on Funen, Denmark, represented by the catchment model MIKE SHE is considered. Detailed analyses have been made with respect to geological and hydrodynamic conditions as well as measurements of pesticide concentrations in ground and surface waters. Maximum concentrations in drain water, the time for reaching this concentration and the time interval for exceeding the limit value have been derived empirically from MIKE SHE simulations using degradation rates and sorption coefficients values for 37 pesticides included in the Danish PATE database. The relatively hydrophilic bentazon and hydrophobic pendimethalin are used as model pesticides for illustration. A simple tool applicable for a wide range of pesticides has thus been designed based on detailed analyses of a limited number of pesticides. The user requirements are degradation rates, sorption coefficients, application rates and regulatory limit values for the pesticides of interest.

Urban stormwater can be treated by infiltration at the source using systems like permeable paving. A critical component of such a system is the filtration media. Laboratory experiments were conducted using columns and boxes to evaluate the sediment retention efficiencies of different filtration media--crushed Greywacke, Greywacke mixed with 10% sand, and layered Greywacke and sand-Greywacke mix. Sediments of 0.001-6 mm were applied at concentrations of 460-4,200 mg/l along with water at flow rates of 100-900 ml/min. All columns showed between 96 and 91% sediment retention efficiency for single dry sediment applications, with lowered sediment retentions at higher flow rates. Decreasing the sediment loading, applying particles of <38 μm size, and suspending the particles in inflow as opposed to directly applying sediments to the column surface gave lower sediment retention efficiencies of 55 to 89%. Sediment retention primarily occurred in the top 20 mm of all columns and the 50th percentile value of retained sediments was 100-300 μm. The box tests showed little effect of flow and sediment loading on particle retention, with the tests showing an average retention of 93%. Similar to the column tests, the box tests showed lower sediment retention (84 to 88%) for <38 μm sediments and greater retention (approximately 95%) for larger sediments.

Plant toxicity and chemical removal tests were conducted to investigate the remediation ability of grasses with respect to volatile organic contaminants (VOCs) in contaminated soil and air. Eastern gamagrass (Tripsacum dactyloides) and annual ryegrass (Lolium rigidum) were exposed to artificially contaminated soil or air containing a mixture of 1,1,1-trichloroethane (TCA), trichloroethylene (TCE), and tetrachloroethylene (PCE) under controlled laboratory conditions. The results showed that the grasses are more severely affected in hydroponics than potted soil contaminated with a mixture of these contaminants. It was observed from the results that more contaminants were detected in the shoot and root of plants grown in a closed system with contaminated air than in an open system with contaminated soil. It is suggested from the results that grasses can be used for purification of VOCs from contaminated air especially in a closed system, but the purification effects are likely to be low. The results also suggested that the concentration level of VOCs in shoot, root, and soil could be used as contamination indicator at contaminated sites.

Advanced oxidation processes (AOPs) are among the most efficient methods for wastewater treatment. To achieve the degradation of persistent organic pollutants (POPs), AOPs have been developed that employ Fenton reactions promoted by ultrasound (US) or microwaves (MW). Integrated methods combining AOPs with biological treatments are also of great interest. The present paper describes such an integrated approach for the decontamination of water from nonylphenol (NP), a common pollutant that accumulates in aquatic organisms and is quite resistant to biodegradation. Polluted water (containing 1,000 ppm of NP) was sequentially subjected to a sonochemical Fenton reaction and biosorption by the filamentous fungus Paecilomyces lilacinus. Although these methods can be used separately, the sequential approach proved more advantageous. In 1 h the sonochemical oxidation, carried out in a 300 kHz US-reactor equipped with a cooling system, halved NP content in polluted water, as determined by GC-MS analysis. The water was then inoculated with pure cultures of the fungus, whose mycelial biomass further reduced NP content in 7 days. Thus an initial NP concentration of 1,000 ppm was reduced approximately by 90%.

The canopy budget model simulates the interaction of major ions within forest canopies based on throughfall and precipitation measurements. The model has been used for estimating dry deposition and canopy exchange fluxes in a wide range of forest ecosystems, but different approaches have been reported. We give an overview of model variations with respect to the time step, type of open-field precipitation data, and tracer ion, and discuss the strengths and weaknesses of different assumptions on ion exchange within forest canopies. To examine the effect of model assumptions on the calculated fluxes, nine approaches were applied to data from two deciduous forest plots located in regions with contrasting atmospheric deposition, i.e. a beech (Fagus sylvatica L.) plot in Belgium and a mixed sugar maple (Acer saccharum Marsh.) plot in Quebec.For both forest plots, a semi-annual time step in the model gave similar results as an annual time step. Na⁺ was found to be more suitable as a tracer ion in the filtering approach than Cl⁻ or [Formula: see text]. Using bulk instead of wet-only precipitation underestimated the potentially acidifying deposition. To compute canopy uptake of [Formula: see text] and H⁺, ion exchange with K⁺, Ca²⁺, and Mg²⁺ as well as simultaneous cation and anion leaching should be considered. Different equations to allocate [Formula: see text] vs H⁺ uptake had most effect on the estimated fluxes of the cation that was less important at a plot. More research is needed on the relative uptake efficiency of H⁺, [Formula: see text], and [Formula: see text] for varying tree species and environmental conditions.

We sampled and analyzed individually, edible dorsal muscle from largemouth bass (LMB), Micropterus salmoides (n = 138) and yellow perch (YP), Perca flavescens (n = 97) from 15 lakes to investigate potential local impacts of mercury emission point sources in northeastern Massachusetts (MA), USA. This area was identified in three separate modeling exercises as a mercury deposition hotspot. In 1995, 55% of mercury emissions to the environment from all MA sources came from three municipal solid waste combustors (trash incinerators) and one large regional medical waste incinerator in the study area. We determined the mercury accumulation history in sediments of a lake centrally located in the study area. Recent maximum mercury accumulation rates in the sediment of the lake of ~ 88 μg/m²/year were highly elevated on a watershed area adjusted basis compared to other lakes in the Northeast and Minnesota. Fish from the study area lakes had significantly (p = 0.05) greater total mercury concentrations than fish from 24 more rural, non-source-impacted lakes in other regions of the state (LMB n = 238, YP n = 381) (LMB: 1.5–2.5 x; YP: 1.5 x). The integration of this extensive fish tissue data set, depositional modeling projections, historical record of mercury accumulation in sediments of a lake in the area, and knowledge of substantial mercury emissions to the atmosphere in the area support designation of this area as a mercury depositional and biological concentration hotspot in the late 1990s, and provides further evidence that major mercury point sources may be associated with significant local impacts on fisheries resources.

An improved understanding of factors that influence the survival and/or growth of Escherichia coli (E. coli) in soil is essential to allow the formation of land management practices to control the spread of the pathogenic strains of the bacteria, whose transmission to fresh produce is a threat to food safety. Persistence of E. coli in soils held at different water potentials and with carbon additions then subjected to post-freezing incubation temperatures and in the presence of Klebsiella terrigena (K. terrigena) were investigated. Soil samples adjusted to different water potentials (-0.03, -0.1 and -1.5 MPa) were inoculated with a multi-antibiotic resistant strain of E. coli (E. coli 2+), which allowed recovery of the organism from soil samples. In addition to manipulation of water content, different C levels were added and samples were frozen for varying lengths of time, thawed and incubated. In freezing studies, initial soil moisture content significantly affected E. coil 2+ survival in soils following thawing, resulting in lower survival rate (k) at water potential of -0.03 than at -0.1 and -1.5 MPa. The effect of length of freezing time was significant only at -0.03 MPa. Glucose addition at 1.25 mg C g⁻¹ improved survival rate versus glucose at 0.125. The low level glucose increased die-off rate versus no addition, suggesting that unless amendments provide C above a certain threshold level, they might facilitate the death of the bacteria. E. coli 2+ survival improved in the presence of K. terrigena at 6°C but not at 23°C. Persistence of E. coli under the interactive influence of various environmental factors highlights the urgency and importance of understanding its potential for transmission to fresh produce and water bodies.

The dust fall in a region is closely related to upwind sources. Dust fall from sandstorms has a strong influence on industry, agriculture, and daily life. Hohhot, the capital of Inner Mongolia Autonomous Region, is downwind of the Inner Mongolia Plateau and experiences frequent sandstorms during the spring monsoon season. This study investigated the relationship between dust fall in the Hohhot area and surface soils on the Inner Mongolia Plateau. Samples of dust fall from Hohhot and surface soils from the plateau were analyzed for major and trace elements. The SiO₂ content of dust fall from sandstorms differs from that of the plateau soils by only 2.77%, indicating that the main dust fall source for Hohhot is surface soils from the plateau. Dust samples from coal smoke, roads, and buildings were used for comparison. The As content in dust fall from sandstorms is greater than that found in the plateau soils and in dust from non-sandstorm days. This indicates that As is added to the sand during transport from the plateau by coal factories near Hohhot. The second most important dust source is traffic, as evidenced by Pb contents. Preventing erosion of sand upwind of Hohhot during the spring monsoon is key to improving and managing air quality in the Hohhot region. This can be accomplished through management of the farm grassland areas.