Ammonia (NH₃) emissions could have significant impacts on both ecosystems and human health. Ice cores from the Tibetan Plateau contain information about past ammonium (NH₄⁺) deposition, which could yield important insights into historical NH₃ emissions in the surrounding source regions as well as long-distance NH₄⁺ aerosol transport via atmospheric circulation. In this paper, we present a high-resolution atmospheric NH₄⁺ deposition record for the period, 1951–2008, reconstructed from the Zangser Kangri (ZK) ice core in the northern Tibetan Plateau. An empirical orthogonal function (EOF) analysis of major soluble ions (NH₄⁺, NO₃⁻, SO₄²⁻, Cl⁻, Na⁺, K⁺, Mg²⁺ and Ca²⁺) reveals that EOF 1 has significant loadings of all ions, therefore representing common transport pathways, while EOF 2 is only significantly loaded by NH₄⁺ (0.86) and NO₃⁻ (0.35), suggesting a unique signal possibly representing emissions from the surrounding terrestrial ecosystems on the Tibetan Plateau. Backward trajectory analysis indicates that the air masses over the ZK ice core drilling site primarily come from the northwestern Indian Peninsula. NH₃ emissions from agricultural activities in this area likely contribute to the NH₄⁺ deposition of the ZK ice core via the Indian monsoon. Correlations between EOF 2 time series and temperature, normalized difference vegetation index (NDVI) suggest that increasing temperature and vegetation after 1980 likely promoted NH₃ emissions from terrestrial ecosystems. Our results provide a reliable and valuable assessment of NH₄⁺ deposition from human activities and terrestrial ecosystems in the ZK ice core, and help in understanding air pollution over the past few decades in the northern Tibetan Plateau.

Transient storage model (TSM) is the most popular model for simulating solutes transport in natural streams. Accurate estimate of TSM parameters is essential in many hydraulic and environmental problems. In this study, an improved version of high-level Moth-Swarm Algorithm (IMSA) was used to predict the TSM parameters. First, the performance of the improved model was successfully assessed through several benchmark functions. Next, a series of 58 measured hydraulic and geometric datasets was used to validate the model. The data were divided into two series randomly, 38 datasets were selected for derivation and the remaining 20 datasets were used to verification. Then the results of IMSA were compared with other algorithms proposed by previous researchers. Two statistical indices of root mean square error (RMSE) and coefficient of correlation (CC) were employed to evaluate the performance of the model. The results showed that despite the high complexity and uncertainty associated with the dispersion processes, the IMSA algorithm could accurately predict the TSM parameters.

The aim of this study was to examine the effects of arbuscular mycorrhizal (AM) fungi, biochar (BC) addition and phosphorus (P) fertilizer applications on the mycorrhizal response, biomass and elemental uptake of Trifolium repens in cadmium (Cd)-polluted soils. The results showed that mycorrhizal colonization were significantly decreased by 100 mg P kg⁻¹ fertilizer input. Moreover, AM fungi, BC addition and P fertilizer significantly increased shoot biomass accumulation at all treatments. In the absence of BC, the nitrogen (N), potassium (K), calcium (Ca) and magnesium (Mg) contents in the shoots were not affected by AM fungi after P fertilizer application, but the P content in the shoots significantly increased in response to AM fungi. In the absence of BC, both AM fungi and P fertilizer significantly reduced the Cd concentrations in the plant tissues as well as the soil diethylenetriaminepentaacetic acid (DTPA)-Cd concentration. These results indicated that the translocation factors (TFs) were influenced only by BC addition and that the roots could accumulate greater amounts of Cd than the shoots. On the basis of the hygienic standard for feed in China, the shoot Cd concentration in white clover was below the maximum permitted Cd concentration (1 μg g⁻¹) across all treatments. Therefore, it is suggested that no negative mycorrhizal-white clover symbiotic relationships were observed and T. repens could be a suitable forage species for planting in soils with low concentrations of Cd contamination when BC and P fertilizer are applied.

This study reveals the impact of biomass burning (BB) on secondary organic aerosols (SOA) formation in the North China Plain (NCP). Filter samples were analyzed for secondary inorganic aerosols (SIA), oxalic acid (C2) and related aqueous-phase SOA compounds (aqSOA), stable carbon isotope composition of C2 (δ13C(C2)) and aerosol liquid water content (ALWC). Based on the PM2.5 loadings, BB tracer concentrations, wildfire spots and air-mass back trajectories, we distinguished two episodes from the whole campaign, Episode I and Episode II, which were characteristic of regional and local BB, respectively. The abundances of PM2.5 and organic matter in the two events were comparable, but concentrations and fractions of SIA, aqSOA during Episode I were much higher than those during Episode II, along with heavier δ13C(C2), suggesting an enhanced aqSOA formation in the earlier period. We found that the enhancement of aqSOA formation during Episode I was caused by an increased ALWC, which was mainly driven by SIA during the regional BB event. Our work showed that intensive burning of crop residue in East Asia can sharply enhance aqSOA production on a large scale, which may have a significant impact on the regional climate and human health.

Parameters such as the settling rate, aggregation rate, and collision frequency in predictive models used to describe the fate of nanoparticles (NPs) are very important for the risk assessment of NPs in the environment. In this study, CeO₂ NPs were chosen as the model particles to investigate such parameters through aggregation-settling experiments under environmentally relevant conditions. The results indicate that natural colloids (Ncs) have no effect on the settling of NPs in seawaters, whereas they stabilize the NPs at a low initial particle concentration and promote the heteroaggregation of NPs at a high initial particle concentration in lake waters. In all cases, a suspended sediment absorbs the NPs and Ncs as mixed aggregates, resulting in a rapid settling. Furthermore, the calculation results of the model indicate that the shear force increases the collision frequency of the NPs by 4–5 orders of magnitude higher than that in quiescent waters. However, the break-up effect by the shear force is more obvious, namely, the shear force hinders the aggregation of NPs in natural waters, instead of promoting aggregation. Remarkably, a negative value of the dis-heteroaggregation rate based on the combined von Smoluchowski–Stokes equation can reflect the hindering effect on the aggregation process. The results of this study will provide scientific and accurate guidance for the parameter selection in the existing prediction model and contribute to a prediction of the fate and transport of NPs in the environment.

Surface waters are becoming increasingly contaminated by pharmaceutically active compounds (PhACs), which is a potential risk factor for drinking water quality owing to incomplete riverbank filtration. This study examined the efficiency of riverbank filtration with regard to 111 PhACs in a highly urbanized section of the river Danube. One hundred seven samples from the Danube were compared to 90 water samples from relevant drinking water abstraction wells (DWAW) during five sampling periods. The presence of 52 PhACs was detected in the Danube, the quantification of 19 agents in this section of the river was without any precedent, and 10 PhACs were present in >80% of the samples. The most frequent PhACs showed higher concentrations in winter than in summer. In the DWAWs, 32 PhACs were quantified. For the majority of PhACs, the bank filtration efficiency was >95%, and not influenced by concentrations measured in the river. For carbamazepine lidocaine, tramadol, and lamotrigine, low (<50%) filtration efficiency was observed; however, no correlations were observed between the concentrations detected in the Danube and in the wells. These frequently occurring PhACs in surface waters have a relatively even distribution, and their sporadic appearance in wells is a function of both space and time, which may be caused by the constantly changing environment and micro-biological parameters, the dynamic operating schedule of abstraction wells, and the resulting sudden changes in flow rates. Due to the changes in the efficiency of riverbank filtration in space and time, predicting the occurrence and concentrations of these four PhACs poses a further challenge to ensuring a safe drinking water supply.

The central mountainous area of Japan is affected by air pollutant emissions from nearby countries such as China and Korea. Sharp increases in the consumption of fossil fuels in the early 21st century, associated with rapid industrialization in China, resulted in long-range transport of pollutants from East Asia and increases in the harmful effects of pollution. However, the air pollutants emissions have decreased since 2006, when air pollution countermeasures were implemented in China. Furthermore, climatic patterns during 2008–2013 reduced tropospheric ozone concentrations around Japan. Such major changes in the social and climatic environment may have had a significant impact on forests. To investigate this, long-term forest monitoring data obtained at Buna-daira (1190 m a.s.l.), Buna-zaka (1090 m a.s.l.) and Arimine (1350 m a.s.l.) were analyzed. Buna-daira and Buna-zaka forests face the continental side of Mt. Tateyama in Toyama Prefecture. In both stands, the girth growth rate of Fagus crenata was found to have increased after 2008; however, such a tendency was not detected at Arimine, which is surrounded by mountains. The growth rates of Cryptomeria japonica, a conifer resistant to air pollution, were found to remain unchanged or decrease. Here, regional long-range transport of air pollution (including ozone and sulfur oxide) has been demonstrated to influence mountain forests in Japan. In particular, recent decreases in regional air pollution may be an important factor controlling increases in F. crenata, likely through changes in interspecific relationships between species sensitive to and tolerant of air pollution.

The present study was aimed at investigating the effects of different acids and pH neutralizers applied to dredged marine sediment for the treatment of heavy metals, and the resulting influence on the sediment quality as a plant growth medium. The inspection of barley germination in the dredged marine sediment revealed that residual salts are critical plant stressors whose adverse effects exceed those exhibited by high-level heavy metals and petroleum hydrocarbons present in the sediment. Acid washing and pH neutralization reduced not only the heavy metal contents but also the sediment salinity (by factors of 6.1–9.5), resulting in 100% germination of barley. For acid-washed and calcium-oxide-neutralized sediment, the barley growth was comparable to that observed in untreated and water washed sediment despite factors of 5.2–8.0 greater sediment salinity in the former. This result represents the protective effect of residual calcium against sodium and chloride toxicity. Water washing of acid-washed and pH-neutralized sediments further enhanced barley growth owing to the reduction in osmotic pressure. This study showed the effect of different sediment-washing reagents on the product quality. It also indicated the significance of balancing the enhancement of product quality and economic cost of further treatment requirements.

Fungicides have been extensively used around the world in agriculture due to their effectiveness of sterilization. Recent evidences have shown that fungicides would exert a negative effect on gut microbiota and result in gut microbiota dysbiosis and metabolism disorder on non-target organisms and even humans. However, research on residues and potential health risks of fungicides in daily consumed vegetables has received less attention compared to insecticides. In this study, we studied three widely applied fungicides, procymidone, dimethomorph, and azoxystrobin, in China. We collected 551 samples of 10 different vegetables in 11 cities from Zhejiang province during 2015–2017. Three fungicides were analyzed by liquid chromatography-tandem mass spectrometry (LC-MS/MS). The average apparent recoveries of three fungicides ranged from 84.2% to 110% with the relative standard deviations lower than 10%. The LOD values of procymidone, dimethomorph, and azoxystrobin was 2, 0.09, and 1 μg/kg, respectively. The levels of procymidone, dimethomorph, and azoxystrobin in those vegetables ranged from ND-875, ND-238, and ND-76 μg/kg, respectively. The highest mean concentrations of procymidone, dimethomorph, and azoxystrobin were found in eggplant (68 μg/kg), spinach (16.4 μg/kg), and kidney bean (4 μg/kg), respectively. Tomato (62.6% of samples), eggplant (44.3% of samples), and cucumber (41.6% of samples) were most frequently detected with fungicides. Solanaceous fruit vegetables have the highest detection rate than other vegetables, and fungicides were most frequently detected in winter. The mean concentrations of three fungicides in different vegetables were all below the maximum residue limits for the national food safety standards of China, and the health risks resulting from consuming those vegetables in adults and children were all within the safe ranges. The data provided here clarify the distributions of fungicides in commonly consumed vegetables and their potential health risks.

As a crucial factor in male reproduction, androgens may represent an intermediate biological mechanism linking metal exposure with effects on semen quality. This study aimed to investigate the association between metal exposure and semen quality, and to assess the mediating role of seminal androgens between metal exposure and semen quality. We investigated the presence of 10 metals in semen and assessed their effect on semen quality in 1136 men recruited from a hospital in Shenzhen, China. Of these, 464 subjects were randomly selected for 4 androgens detection in semen. Cross-sectional associations between single/multiple metals, androgen levels and semen quality were explored by multivariable linear regressions. Mediation analysis was performed to detect the role of seminal androgens on the association between metal exposure and semen quality. Seminal selenium and iron were positively associated with both sperm concentration and total sperm count. Negative associations were observed between both manganese and zinc and sperm concentration, molybdenum and total sperm count, copper and sperm motility. Furthermore, we found significant dose-dependent relationships between both iron and selenium levels and dihydrotestosterone (DHT), arsenic levels and testosterone, as well as zinc and dehydroepiandrosterone. Mediation analysis indicated that higher seminal iron and selenium were associated with an increasing sperm concentration after controlling for DHT, with 10.32% and 12.89% of these associations were mediated by DHT, respectively. A similar mediation effect of DHT was observed in the associations between iron and selenium levels and total sperm count (13.39% and 21.57% mediation, respectively). Our findings suggested that the presence of selenium and iron in semen was beneficial to sperm concentration and total count. Seminal manganese, zinc, molybdenum and copper may be associated with reduced semen quality. The associations between seminal selenium and iron and sperm concentration and total count were partially explained by the concomitant variation of seminal DHT.