This research investigated the feasibility of changing waste into useful materials for water treatment and proposed a coagulation–magnetic separation technique. This technique was rapid and highly effective for clearing up harmful algal blooms in freshwater and mitigating lake eutrophication. A magnetic coagulant was synthesized by compounding acid-modified fly ash with magnetite (Fe₃O₄). Its removal effects on algal cells and dissolved organics in water were studied. After mixing, coagulation, and magnetic separation, the flocs obtained from the magnet surface were examined by SEM. Treated samples were withdrawn for the content determination of chlorophyll-a, turbidity, chemical oxygen demand (COD), total nitrogen, and total phosphorus. More than 99 % of algal cells were removed within 5 min after the addition of magnetic coagulant at optimal loadings (200 mg L⁻¹). The removal efficiencies of COD, total nitrogen, and phosphorus were 93, 91, and 94 %, respectively. The mechanism of algal removal explored preliminarily showed that the magnetic coagulant played multiple roles in mesoporous adsorption, netting and bridging, as well as high magnetic responsiveness to a magnetic field. The magnetic–coagulation separation method can rapidly and effectively remove algae from water bodies and greatly mitigate eutrophication of freshwater using a new magnetic coagulant. The method has good performance, is low cost, can turn waste into something valuable, and provides reference and directions for future pilot and production scale-ups.

Information on the relationship between black carbon (BC) and particle number levels in urban areas is limited. Therefore, investigating the relationship between BC and particle number levels in different particle size ranges at an urban area is worthwhile. This study used an aethalometer and scanning mobility particle sizer to measure the levels of BC and particle number simultaneously at an urban roadside in Taipei City. Measurement results show that hourly BC levels are 0.62–8.80 μg m⁻³ (mean = 3.50 μg m⁻³) and hourly particle number levels are 4.21 × 10³–4.64 × 10⁴ particles cm⁻³ (mean = 2.00 × 10⁴ particles cm⁻³) in Taipei urban area. The BC and particle number levels peak during morning (7:00–9:00) and evening (16:00–18:00) rush hours on weekdays. Low BC and particle number levels exist in the early morning hours. Time variations in BC levels are the same as those of particle number levels in this study, clearly indicating that BC and particles are likely released from the same emission source. Additionally, BC levels in the urban area are more strongly associated with ultrafine particle levels than with total particle number levels, particularly in the size range of 56–180 nm. According to measurement results, most BC in aerosols in urban areas can be in the ultrafine size range.

In the present study, ordered mesocage hexagonal P6mm and cubic Pm3n aluminosilica nanoadsorbents with monolith-like morphology and micro-, meso-, and macro-pores were fabricated using a simple, reproducible, direct synthesis. Our results suggest that the aluminosilica nanoadsorbents attained the ordering and uniform hexagonal and cubic pores even at the high Si/Al ratio of 4. The acidity of nanoadsorbents significantly based on the amount of aluminum species in the walls of the silica pore framework. Aluminosilica nanoadsorbents were used as a removal of environmentally toxic aromatic amines, namely p-nitroaniline (p-NA), from wastewater. The loading amount of Bronsted acid sites, mesostructural geometries, and multi-directional pores (3D) of the aluminosilica adsorbents played a key factor in the enhancement of the coverage adsorbent surfaces and intraparticle diffusion of adsorbate molecules onto the network surfaces and into the pore architectures of monoliths. Significantly, we developed theoretical models to explain the 3D microscopic geometry and the pore orientation of aluminosilica monoliths. A key component of the nanoadsorbents is the ability to create revisable p-NA adsorption systems with multiple reuse cycles. However, simple treatment using an acidic aqueous solution was found to remove effectively the p-NA and to form “p-NA-free” pore surfaces without any mesostructural damage.

Prior investigations identified an association between low-level blood arsenic (As) and bladder cancer risk among Tunisian men but questions remain regarding confounding by cadmium (Cd), a well-established bladder carcinogen. A case-control study of Tunisian men was re-examined to assess the levels of cadmium in blood and reparse the association between the simultaneous exposure to these metals and bladder cancer risk. Levels of blood Cd were significantly twice higher among cases than in controls (P < 0.05) and were positively correlated with smoking and age. Additionally, analysis of metal levels among non-smokers according to the region of residence showed very high blood Cd and As levels for the coastal regions of Sfax and central Tunisia. After controlling for potential confounders, for low blood As levels (<0.67 μg/L), the OR for blood Cd was 4.10 (95 % CI 1.64-10.81), while for higher levels (>0.67 μg/L), it was reduced to 2.10 (CI, 1.06-4.17). Adjustment for Cd exposure did not alter the risk associated to As exposure. This study is the first to report the relationship between Cd exposure and risk of bladder cancer occurrence in interaction with smoking and As exposure. Smoking is shown to be the main exposure source to Cd in the Tunisian population but also environmental pollution seems to be responsible of Cd exposure among non-smokers. Exposure assessment studies encompassing a wider population are needed.

In the 1970s, a large ambulatory of the National Tile Museum, Lisbon, was closed with glass panes on both ground and first floor. Although this design was meant to protect the museum collection from ambient air pollutants, small openings between the glass panes remain, creating a semi-enclosed corridor. The effects of the glass panes on the indoor air quality were evaluated in a comparative study by monitoring the airborne particle concentration and the extent of particle deposition at the enclosed corridor as well as inside the museum building. Comparison of the indoor/outdoor ratio of airborne particle concentration demonstrated a high natural ventilation rate in the enclosed corridor as well as inside the museum building. PM₁₀ deposition velocities on vertical surfaces were estimated in the order of 3 × 10⁻⁴ m s⁻¹ for both indoor locations. Also, the deposition rates of dark-coloured and black particles in specific were very similar at both indoor locations, causing visual degradation. The effectiveness of the glass panes in protecting the museum collection is discussed.

The Tibetan Plateau is suggested to be an important indicator region to study the global long-range atmospheric transport of persistent organic pollutants. In this study, atmospheric polycyclic aromatic hydrocarbons (PAHs) were studied in Lhasa City in the Tibetan Plateau, China. Air samples in gas and particle phases were concurrently collected by a modified high-volume air sampler from 5 August 2008 to 13 July 2009. The concentration of ∑16PAHs ranged from 18 to 160 ng m(-3) (with a geometric mean of 68 ng m(-3)). The most abundant PAHs were phenanthrene and benzo(b)fluoranthene in gas and particle phases, respectively. Compared with other two similar studies in Beijing and Harbin, different temporal trends were found between gas and particle phases PAHs in Lhasa. The influences of meteorological parameters (ambient temperature and relative humidity) and air masses from China, India, Southeast Asia, and West Asia were the two important reasons for explaining the difference, which was confirmed by the 5-day backward trajectories. This is the first comprehensive study to provide the evidence for the different influences of long-range atmospheric transport on gas and particle phases PAHs pollution in the Tibetan Plateau.

Sub-inhibitory concentrations of antibiotics, which are found in environmental water systems and sewage plants due to an increased use in therapeutical and preventive fields, influence bacterial behavior in biofilms. The application of sulfamethoxazole, erythromycin, and roxithromycin induced changes in biofilm dynamics regarding biomass formation, spatial structure and specific gene expression in different Pseudomonas aeruginosa isolates. Exposing multi-resistant environmental isolated strains for 17 h to environmental concentrations of antibiotics or wastewater, directly, an increase in biofilm biomass and thickness could be observed for each strain. Additionally, multi-resistant strains responded to the applied growth conditions with changes in transcriptional activity. Here, sub-inhibitory concentrations of macrolides specifically upregulated expression of quorum sensing genes (rhlR, lasI), whereas sulfonamides and municipal wastewater, instead upregulated expression of specific resistant genes (sul1) and efflux pumps (mexD). Antibiotic sensitive isolates demonstrated an overall higher transcriptionally activity, but did not show a specific gene response to the applied exogenous stimuli. Furthermore, the presence of low concentrated antibiotics induced also phenotypical change in the biofilm architecture observed by 3D-imaging.

Upon completion of exploration and extraction of mineral resources, many mining sites have been abandoned without previously putting environmental protection measures in place. As a consequence, mine waters originating from such sites are discharged freely into surface water. Regional scale analyses were conducted to determine the hydrochemical characteristics of mine waters from abandoned sites featuring metal (Cu, Pb–Zn, Au, Fe, Sb, Mo, Bi, Hg) deposits, non-metallic minerals (coal, Mg, F, B) and uranium. The study included 80 mine water samples from 59 abandoned mining sites. Their cation composition was dominated by Ca²⁺, while the most common anions were found to be SO₄ ²⁻ and HCO₃ ⁻. Strong correlations were established between the pH level and metal (Fe, Mn, Zn, Cu) concentrations in the mine waters. Hierarchical cluster analysis was applied to parameters generally indicative of pollution, such as pH, TDS, SO₄ ²⁻, Fe total, and As total. Following this approach, mine water samples were grouped into three main clusters and six subclusters, depending on their potential environmental impact. Principal component analysis was used to group together variables that share the same variance. The extracted principal components indicated that sulfide oxidation and weathering of silicate and carbonate rocks were the primary processes, while pH buffering, adsorption and ion exchange were secondary drivers of the chemical composition of the analyzed mine waters. Surface waters, which received the mine waters, were examined. Analysis showed increases of sulfate and metal concentrations and general degradation of surface water quality.

The construction and electrodes characteristics of poly(vinylchloride) (PVC)-based polymeric membrane electrode (PME) and coated graphite electrode (CGE), incorporating 1,3-alternate thiacalix[4]crown as ionophore for estimation of Hg(II) ions, are reported here. The best potential response was observed for PME-1 having membrane composition of: ionophore (6.2 mg), PVC (100.0 mg), 2-nitrophenyl octyl ether (2-NPOE; 200.0 mg), and sodium tetraphenyl borate (NaTPB; 2.0 mg); for CGE-1 with the membrane composition: ionophore (3.5 mg), PVC (40.0 mg), 2-NPOE (80.0 mg), and NaTPB (2.0 mg). The electrodes exhibits Nernstian slope of 29.16 mV/decade with PME-1 and 30.39 mV/decade with CGE-1 for Hg(II) ions over wide concentration range, i.e., 1.0 × 10⁻¹ to 5.0 × 10⁻⁶ M with PME-1 and 1.0 × 10⁻¹ to 5.0 × 10⁻⁷ M with CGE-1. Lower detection limits were found to be 9.77 × 10⁻⁶ M for PME-1 and 7.76 × 10⁻⁷ M for CGE-1 with response time varying from 10 to 20 s. Also, these electrodes work within pH range of 2.0–6.0 for PME-1 and 1.5–6.5 for CGE-1. Overall, CGE-1 has been found to be better than PME-1. CGE-1 has been used as indicator electrode for the potentiometric titration of Hg(II) ions with EDTA as well as successfully applied for determination of Hg(II) content in wastewater, insecticide, dental amalgam, and ayurvedic medicines samples with very good performance (0.9974 correlation coefficient in the comparison against volumetric method).