Heavy metal contamination causes significant environmental problems around the world and poses a threat to human health. Poplar hybrids present features for potential uses in phytoremediation systems in areas with heavy metal contamination. The purpose of this study was to assess the copper (Cu) accumulation level in five poplar inter-species hybrids [(Populus trichocarpa × Populus deltoides) × P. deltoides; P. deltoides × Populus nigra; P. trichocarpa × Populus maximowiczii; P. trichocarpa × P. nigra; and (P. trichocarpa × P. deltoides) × (P. trichocarpa × P. deltoides)] grown in a hydroponic system. The treatments entailed the application of low and high doses of Cu of 8.0 and 16.0 μM, respectively. Cu accumulation was observed in roots, stems, and leaves, which was determined using flame atomic absorption spectroscopy, prior acid digestion of each sample. The methodology was validated according to certified reference material (Cypress BIMEP 432). Significant differences in Cu accumulation were found among genotypes for both roots and leaves, but not for stems. In roots, the genotype P. deltoides × P. nigra had a Cu accumulation level of 169.8% higher than the average accumulation found in the other genotypes. The (P. trichocarpa × P. deltoides) × P. deltoides hybrid showed the least Cu accumulation in leaves. The results of this study can potentially be used for proper crossovers and hybrids selection within the genus Populus for phytoremediation of Cu contaminated land.

Five common fungal strains, Cladosporium cladosporioides, Aspergillus clavatus, Penicillium citrinum, Fusarium oxysporum, and Alternaria alternata, were cultivated in presence of iodide and iodate to evaluate their efficiency in iodine biovolatilization and bioaccumulation. Our results suggest that iodide and iodate bioaccumulation by microscopic filamentous fungi is similar although the biological transformation into volatile iodine compounds is driven by various pathways resulting in higher volatilization efficiency of iodate. Thus, the mobilization of iodate by filamentous fungi is superior to iodide mobilization. Our paper is also the first to compare the iodide and iodate volatilization efficiency by microorganisms. Our results highlight the significant role of filamentous fungi in biogeochemistry of iodine, especially in formation of environmentally reactive volatile forms that may contribute to ozone layer destruction.

Metals are commonly determined in aquatic organisms, primarily using bivalves to provide important data on their bioavailability. The technique of diffusive gradients in thin films (DGTs) has also been employed to assess the concentration of metals in freshwater and marine environments, determining their lability. The present work evaluated and compared the labile and bioavailable concentrations of Cd, Co, Cu, Mn, Ni and Pb in seawater from Ilha Grande Bay, RJ, using DGT and transplanted bivalves (Nodipecten nodosus), respectively. The scallops and DGTs were immersed in water at three sampling locations within the bay from July to September 2012 (winter campaign) and from December 2012 to February 2013 (summer campaign). The metals were determined by inductively coupled plasma-mass spectrometry (ICP-MS) and optical emission spectrometry (ICP-OES). DGT technique was successfully used to determine the concentrations of metals in waters, except for Pb when short deployment times were used. All metals were determined using transplanted bivalves (N. nodosus), but pre-exposure to Cd was evident, which made the interpretation of the data for this analyte difficult. The data on metal lability in Ilha Grande Bay waters obtained from the DGT technique were correlated with the metal bioavailability determined in the soft tissues of the transplanted N. nodosus for Co, Cu, Mn, Ni and Pb. This is the first evaluation of this type for this area of high environmental concern. Both techniques revealed that Náutico was the location with the highest concentration of metals in the study area.

A novel adsorbent was prepared by introducing xanthate group onto pristine multi-walled carbon nanotubes (MWCNTs) for removing Pb (II) from aqueous solution. The structure and property of xanthate-modified MWCNT (MWCNT-X) were detected by the technologies of Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermal gravimetric analysis (TGA), and Brunauer–Emmett–Teller (BET). The investigation of various parameters, such as initial metal concentration, pH, contact time, and temperature, was taken to illustrate the adsorption behaviors of Pb (II) on MWCNT-X. Based on experimental data, Langmuir isotherm and pseudo-second-order kinetic provided a better correspondence to the adsorption process. The negative values of ΔG ᶿ and ΔH ᶿ indicated that the adsorption process is exothermic and spontaneous. Besides, the maximum uptake of MWCNT-X reached to 83.01 mg/g, which was much higher than that of pristine MWCNT and hydroxylated MWCNT (MWCNT-OH). Thus, the MWCNT-X can be potentially applied in heavy metal treatment.

Increasing soil contamination by heavy metals is a major threat to environmental safety and global food security. The present study examined the influence of Cd and As stresses on morpho-physiological growth and yield of two contrasting maize cultivars (Run Nong 35 and Dong Dan 80). The Cd (100 μM) and As (200 μM) were applied individually as well as in combination (Cd + As) at 30 DAS. A control without Cd or As stress was also maintained for comparison. Application of Cd and As alone or in combination substantially reduced the growth (plant height, number of leaves per plant, leaf area, stem diameter, and shoot fresh and dry weight) and yield (number of ears per plant, number of kernels per ear, and 100-kernel weight) contributing traits in both maize cultivars particularly in Run Nong 35. Furthermore, pronounced reductions in gas exchange attributes (photosynthesis, stomatal conductance, transpiration rate, and intercellular CO₂) and chlorophyll contents were observed in metal-stressed plants. The combined application of Cd and As was more detrimental for maize, and this treatment recorded the maximum reductions in morpho-physiological growth and yield of both cultivars. Cultivar variations were also apparent, and Dong Dan 80 performed better than Run Nong 35 for all the studied attributes. The higher tolerance of Dong Dan 80 was associated with better leaf gas exchange and maintenance of chlorophyll contents in this cultivar under Cd and As stress.

According to our previous results on the magnesium-based exhaust gas cleaning system (Mg-EGCS), certain parameters of the desulphurization wastewater (such as chemical oxygen demand (COD), suspended solids (SS), total oil content and turbidity) were above the washwater discharge criteria set by the International Maritime Organization (IMO). In this work, a novel combined process of aeration-centrifugation and filter pressing was proposed, and a pilot-scale experiment was carried out to treat the desulphurization wastewater. The results demonstrated that the quality of wastewater treated by the combined process could meet the IMO’s washwater discharge standard, with COD of 115 mg/L, SS of <5 mg/L, polycyclic aromatic hydrocarbons (PAHs) of <1 μg/L, and total oil content of 5.1 mg/L, when the washwater flow rate was 0.45 m³/h.

The trihalomethanes (TTHMs) and others disinfection by-products (DBPs) are formed in drinking water by the reaction of chlorine with organic precursors contained in the source water, in two consecutive and linked stages, that starts at the treatment plant and continues in second stage along the distribution system (DS) by reaction of residual chlorine with organic precursors not removed. Following this approach, this study aimed at developing a two-stage empirical model for predicting the formation of TTHMs in the water treatment plant and subsequently their evolution along the water distribution system (WDS). The aim of the two-stage model was to improve the predictive capability for a wide range of scenarios of water treatments and distribution systems. The two-stage model was developed using multiple regression analysis from a database (January 2007 to July 2012) using three different treatment processes (conventional and advanced) in the water supply system of Aljaraque area (southwest of Spain). Then, the new model was validated using a recent database from the same water supply system (January 2011 to May 2015). The validation results indicated no significant difference in the predictive and observed values of TTHM (R ² 0.874, analytical variance <17%). The new model was applied to three different supply systems with different treatment processes and different characteristics. Acceptable predictions were obtained in the three distribution systems studied, proving the adaptability of the new model to the boundary conditions. Finally the predictive capability of the new model was compared with 17 other models selected from the literature, showing satisfactory results prediction and excellent adaptability to treatment processes.

Little is known about the environmental behavior of fenhexamid (FEN) in aquatic ecosystems such as degradation and bioaccumulation, in spite of the fact that it is critical for a comprehensive assessment of its ecological risks. This study investigated for the first time the degradation of FEN in water-sediment systems under both aerobic and anaerobic conditions and also bioaccumulation by zebrafish (Danio rerio). Water and sediments from different natural waters including river HR and lake HL were applied to build up water-sediment microcosms in the laboratory. When FEN was introduced into the aqueous phase, it would partition from water to sediment gradually and be decomposed in sediment compartment. The dissipation half-lives of FEN in water were 43.8, 75.9, 31.3, and 37.2 days for HR-aerobic, HR-anaerobic, HL-aerobic, and HL-anaerobic microcosms, respectively. Moreover, FEN degradation rate constants of whole systems varied from 0.0045 to 0.0088 per day and the half-lives were from 78.4 to 155 days. The aerobic circumstances were demonstrated to be favor of FEN degradation. The bioconcentration factor (BCF) was 2.6–3.1 obtained from zebrafish exposure experiments at environmentally relevant concentrations. Clearly, our results indicated that FEN could be accumulated in the deeper layer of sediment owing to the anaerobic condition against FEN degradation, but FEN showed a low potential for bioaccumulation. These may aid in comprehensive understanding the fate and risk of FEN in aquatic environment.

Ni, Cu, and Ni-Cu metal oxides supported on granular activated carbon (GAC) were synthesized and used in catalytic ozonation of heavy oil produced water. The effect of preparation conditions on their catalyst composition, catalyst structure, and catalytic activity was investigated. The catalyst structure was characterized by X-ray power diffraction (XRD). The results revealed that the Ni-Cu/GAC has the highest catalytic activity, followed by Cu/GAC and Ni/GAC. Metal oxide loading rate depended on impregnation process, whereas dispersion of metal oxides was controlled by calcination process. The XRD analysis showed that the principal active phase was Cu₂O for Cu/GAC and Ni-Cu/GAC catalyst and NiO for Ni/GAC catalyst. The most active plane was Cu₂O₍₂₀₀₎ and then followed by Cu₂O₍₁₁₀₎ and Cu₂O₍₁₁₁₎ for Cu-supported catalysts. Higher calcination temperature and time favored the generation of Cu₂O but increased the crystalline diameter. It also suggested that promoting the generation of NiO and Cu₂O phase and reducing the crystalline diameter could improve the catalytic activity. During Ni-Cu/GAC preparation, existence of Ni(NO₃)₂ could accelerate the adsorption of Cu(NO₃)₂, promoting the generation of Cu₂O, and improve the dispersion of Cu₂O phase. Graphical Abstract ᅟ

To evaluate the exposure of children to 14 perfluorinated compounds (PFCs) in a typical and representative industrial city, plasma samples from 476 children aged 0–7 years in Foshan, China, were analysed. Perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) were detected in 100% of the samples, accounting for 82.27 and 11.46% of the total PFC concentrations, respectively, while PFOS peaked at age 0–1 years, for which the mean and median concentrations were 113.71 and 83.65 ng/mL, respectively, while PFOA peaked at age 3–4 years, for which the mean and median concentrations were 10.68 and 6.58 ng/mL, respectively. The concentrations of PFOS, perfluorohexane sulfonate and perfluorohexanoic acid decreased with age among children aged 0–7 years, and no gender-related differences were found in the concentrations of PFCs. A high correlation was found among all PFCs, especially between PFCs of similar carbon chains (r = 0.161–0.695, p < 0.05). In addition, the concentrations of PFOS and PFOA in children’s plasma in Foshan were up to 40-fold higher than those reported in China and other countries. In conclusion, children in Foshan have extensive exposure to PFCs, especially in infancy. Further studies are needed to explore the impact of PFCs on children who live in a typical and representative industrial city in China. Graphical abstract ᅟ