Many studies have shown the relationship between fire clearing and mercury contamination of aquatic ecosystems in the Brazilian Amazon. This study aimed at quantifying mercury content in long-time cultivated soils and at assessing the potential of a fire-free alternative clearing technique on mercury retention for long-time cultivated soils compared to traditional slash-and-burn. This case study included five land uses: one crop plot and one pasture plot cleared using slash-and-burn, one crop plot and one pasture plot cleared using chop-and-mulch, and one 40-year-old forest as a control. Low mercury concentrations were recorded in the surface horizon (24.83 to 49.48 ng g?1, 0–5 cm depth). The long-time cultivation (repeated burnings) of these soils triggered large mercury losses in the surface horizon, highlighted by high enrichment factors from surface to deeper horizons. The predominant effect of repeated burnings before the experimental implementation did not let us to distinguish a positive effect of the chop-and-mulch clearing method on soil mercury retention for crops and pastures. Moreover, some processes related to the presence of the mulch may favor mercury retention (Hg volatilization decrease, cationic sites increase), while others may contribute to mercury losses (cationic competition and dislocation, mobilization by the dissolved organic matter). (Résumé d'auteur)

The aim of this study was to identify primary flow paths involved in the chlordecone (CLD) river contamination and quantify the CLD fluxes to assess CLD pollution levels and duration according to a typical catchment of the banana cropping area in the French Indies (Guadeloupe): the Perou Catchment (12 km(2)) characterized by heavy rainfall (5686 mm year(-1)). Three sub-catchments (SC1, SC2 and SC3) were studied during the hydrological year 2009-2010: a pedological survey combined with a spatialized hydrochemical approach was conducted. The average soil concentration is higher in the Perou Catchment (3400 mu g kg(-1)) than in the entire banana cropping area in Guadeloupe (2100 mu g kg(-1)). The results showed that CLD stocks in soils vary largely among soil types and farming systems: the weakest stocks are located upstream in SC1 (5 kg ha(-1)), where a majority of the area is non-cultivated; medium stocks are located in Nitisols downstream in SC3 (9 kg ha(-1)); and the greatest stocks are observed in SC2 on Andosols (12 kg ha(-1)) characterized by large farms. The annual water balance and the hydro-chemical analysis revealed that the three sub-catchments exhibited different behaviors. Perou River contamination was high during low flows, which highlighted that contamination primarily originated from groundwater contributions. The results showed that only a small part of the catchment (SC2), contributing little to the water flow, comprises a major CLD contribution, which is in agreement with the highly contaminated andosol soils observed there. Another significant result considers that at least 50 years would be required to export the totality of the actual CLD soil stocks retained in the topsoil layer. The actual time for soil remediation will however be much longer considering (i) the necessary time for the chlordecone to percolate and be stored in the shallow aquifers and (ii) its travel time to reach the river.rights reserved.

International audience | Aided phytostabilization using a combination of compost, zerovalent iron grit and coal fly ash (CZA) amendments and revegetation effectively promoted the biological recovery of mining spoils generated at a gold mine in Portugal. Selective dissolution of spoil samples in combination with solid phase characterization using microbeam X-ray absorption near edge structure (μXANES) spectroscopy and microbeam X-ray fluorescence (μXRF) mapping were used to assess As associations in spoils ten years after CZA treatment. The results show that As preferentially associates with poorly crystalline Fe-oxyhydroxides as opposed to crystalline Fe-(oxyhydr)oxide phases. The crystalline Fe(III)-phases dominated in the treated spoil and exceeded those of the untreated spoil three-fold, but only 2.6–6.8% of total As was associated with this fraction. Correlation maps of As:Fe reveal that As in the CZA-treated spoils is primarily contained in surface coatings as precipitates and sorbates. Arsenic binding with poorly crystalline Fe-oxyhydroxides did not inhibit As uptake by plants.

International audience | The influence of atmospheric phenanthrene (PHE) exposure (160 mgm 3) during one month on carbon allocation in clover was investigated by integrative (plant growth analysis) and instantaneous 13CO2 pulse-labelling approaches. PHE exposure diminished plant growth parameters (relative growth rate and net assimilation rate) and disturbed photosynthesis (carbon assimilation rate and chlorophyll content), leading to a 25% decrease in clover biomass. The root-shoot ratio was significantly enhanced (from 0.32 to 0.44). Photosynthates were identically allocated to leaves while less allocated to stems and roots. PHE exposure had a significant overall effect on the 13C partitioning among clover organs as more carbon was retained in leaves at the expense of roots and stems. The findings indicate that PHE decreases root exudation or transfer to symbionts and in leaves, retains carbon in a non-structural form diverting photosynthates away from growth and respiration (emergence of an additional C loss process).

International audience | he aim of this study is to bring to light the influence on firewood emissions and performance of several parameters like the moisture content of the fuel, the presence of bark, the caliber of the fuel but also the ignition mode. Many results emerge from this study. First of all, all these parameters significantly impact the emissions of the firewood at the nominal thermal heat output, especially the particles emissions. The presence of bark modifies the particles composition in total carbon. Moreover, the presence of bark induces the emissions of a new family of particles: the nanocrystal. A high moisture of the fuel led to a lower temperature in the combustion chamber. Then, the emissions of unburned gases, like the Volatile Organic Compounds, will considerably increase. The particles emissions and the composition of those particles were also significantly impacted by the moisture of the fuel. Two ignition modes were also studied. It appears that the top-down ignition against the traditional ignition allowed a significant decrease of all the emissions. Nevertheless, the elemental carbon emissions were more important with a top-down ignition. | L’objectif de cette étude est de mettre en évidence l’influence sur les émissions et les performances d’un appareil de différents paramètres, comme l’humidité du bois, la présence d’écorce ou non, le calibre utilisé ainsi que le mode d’allumage. De nombreux résultats ressortent de cette étude. Tout d’abord, tous ces paramètres influent de manière considérable sur les émissions des appareils, notamment les émissions de particules, et ce, même à régime nominal. La présence d’écorce modifie la composition en carbone total des particules totales et implique l’émission d’un nouveau type de particule : les nano-cristaux. Une humidité élevée induit des niveaux de températures plus faibles. Ainsi, les émissions d’imbrûlés gazeux tels que les Composés Organiques Volatils vont augmenter de manière importante. Les émissions de particules, en quantité et en composition chimique, sont aussi significativement impactées par l’humidité du combustible. Deux modes d’allumage ont aussi été étudiés. Il s’avère qu’un allumage inversé permet de réduire de manière significative la globalité des émissions par rapport à un allumage classique. En effet, seules les émissions de Carbone Elémentaire sont plus importantes avec un allumage inversé.

International audience | Polycyclic aromatic hydrocarbon (PAH) concentrations and N, C stable isotope signatures were determined in mosses Hypnum cupressiforme Hedw. from 61 sites of 3 European regions: Île-de-France (France); Navarra (Spain); the Swiss Plateau and Basel area (Switzerland). Total PAH concentrations of 100-700 ng g-1, as well as δ13C values of -32 to -29‰ and δ15N values of -11 to -3‰ were measured. Pearson correlation tests revealed opposite trends between high molecular weight PAH (4-6 aromatic rings) content and δ13C values. Partial Least Square regressions explained the very significant correlations (r > 0.91, p < 0.001) between high molecular weight PAH concentrations by local urban land use (<10 km) and environmental factors such as elevation and pluviometry. Finally, specific correlations between heavy metal and PAH concentrations were attributed to industrial emissions in Switzerland and road traffic emissions in Spain.

International audience | Shipping noise is a threat to marine wildlife. Grey seals are benthic foragers, and thus experience acoustic noise throughout the water column, which makes them a good model species for a case study of the potential impacts of shipping noise. We used ship track data from the Celtic Sea, seal track data and a coupled ocean-acoustic modelling system to assess the noise exposure of grey seals along their tracks. It was found that the animals experience step changes in sound levels up to ~20dB at a frequency of 125Hz, and ~10dB on average over 10 1000Hz when they dive through the thermocline, particularly during summer. Our results showed large seasonal differences in the noise level experienced by the seals. These results reveal the actual noise exposure by the animals and could help in marine spatial planning. 2

The former use of chlordecone (CLD) in the French West Indies has resulted in long-term pollution of soils and of food chains. CLD may be transferred into eggs of hens reared outdoors, through polluted soil ingestion. Tropical volcanic soils display variable capacities of pollutant retention: CLD is less available and more persistent in andosol than in nitisol. The impact of soil type on CLD bioavailability to hens was tested through a relative bioavailability study. The deposition of CLD in egg yolk and in abdominal fat was measured in 42 individually housed laying hens fed with diets containing graded levels of CLD from polluted andosol, nitisol, or spiked oil during 23 days. Within each ingested matrix, the concentration of CLD in yolk and in abdominal fat linearly increased with the amount of ingested CLD (P<0.001). However, the response to andosol diets and to nitisol diets was not different from the response to oil diets (P>0.1), indicating that CLD was equally bioavailable to laying hens, irrespective of the matrix. This suggests that the hen's gastrointestinal tract efficiently extracts CLD from the two tropical volcanic soils, regardless of their retention capacity. Thus, hens reared on polluted soils with CLD may lay contaminated eggs. (Résumé d'auteur)

no sp Assessment of Nitrogen Fluxes to Air and Water from Site Scale to Continental Scale | absent

Atmospheric emissions from road transport have increased all around the world since 1990 more rapidly than from other pollution sources. Moreover, they contribute to more than 25% of total emissions in the majority of the European Countries. This situation confirms the importance of road transport when complying with emission ceilings (e.g. Kyoto Protocol and National Emissions Ceilings Directive). A methodology has been developed to evaluate the effect of transport measures on atmospheric emissions (EmiTRANS). Its application to Spain in the horizon of 2020 allows the quantification of the effect of several measures on emission reductions. This quantification was done through scenario development. Several scenarios were calculated considering technical measures (e.g. vehicle scrapping systems, higher penetration of hybrid and electric vehicles, fuel substitution, etc.) and non-technical measures (mileage reduction, implementation of Low Emission Zones and/or Congestion Charges in main cities, reduction of average speeds, logistical improvements that affects heavy duty vehicle load factors, etc.). The scenarios show the effect of each measure on NOx, SO2, CO, PM10, PM2.5, VOC, CO2 and CH4 emissions. The main conclusion is the necessity to combine both technical and non-technical measures to increase global effectiveness. In the analysis of specific pollutants, there is a great dispersion on reductions effect: technical measures are more effective to reduce air pollutants while non-technical measures are better options to reduce greenhouse effect gases (even though they also reduce air pollutants in a less efficient way).