Drought is a serious concern in many parts of the world, including in California, where paucity of available irrigation water has impaired crop production and soil health through salt accumulation. With extending water and salinity crises, there is a need for advanced salt and vegetation management. To develop more efficient management solutions, Slingram electromagnetic investigations and stochastic and statistical analyses were performed for determining optimal vegetable yields in a salt-affected farmland. The Slingram results were evaluated using multi-linear regression analyses, and the yield and salinity were characterized for central tendency, variance, distributions and symmetry. The yields of two studied vegetable crops, lettuce and tomato, increased with decreasing salinity load. The average lettuce and tomato yield potentials were 55 and 75%, respectively. The minimum yield potential for tomato was 9.5 times higher than that for lettuce. The mode value for conductivity (ECₑ) was 650 mS m⁻¹, which corresponded to 50% yield loss. The yield loss was <10% in locations with ECₑ < 250 mS m⁻¹. In zones with ECₑ > 850 mS m⁻¹, the yield reductions for lettuce and tomato reached up to 96 and 60%, respectively. About 57 and 82% of the field area could be limited to 20% yield potentials for tomato and lettuce, respectively. Lettuce had a higher cost benefit than tomato albeit with a greater yield potential of the latter crop. By delineating the spatial contours of salt-induced yield variability, vegetables can be grown in segmented soil zones based on salinity levels.

This study investigates the impact of future climate change on heavy metal (i.e., Cd and Zn) transport from soils to surface waters in a contaminated lowland catchment. The WALRUS hydrological model is employed in a semi-distributed manner to simulate current and future hydrological fluxes in the Dommel catchment in the Netherlands. The model is forced with climate change projections and the simulated fluxes are used as input to a metal transport model that simulates heavy metal concentrations and loads in quickflow and baseflow pathways. Metal transport is simulated under baseline climate (“2000–2010”) and future climate (“2090–2099”) conditions including scenarios for no climate change and climate change. The outcomes show an increase in Cd and Zn loads and the mean flux-weighted Cd and Zn concentrations in the discharged runoff, which is attributed to breakthrough of heavy metals from the soil system. Due to climate change, runoff enhances and leaching is accelerated, resulting in enhanced Cd and Zn loads. Mean flux-weighted concentrations in the discharged runoff increase during early summer and decrease during late summer and early autumn under the most extreme scenario of climate change. The results of this study provide improved understanding on the processes responsible for future changes in heavy metal contamination in lowland catchments.

Ultraviolet (UV) disinfection of wastewater is adversely affected by the presence of particle-associated bacteria. Earlier studies have shown that disrupting these particles by ultrasonic cavitation can enhance the UV disinfection of wastewater. However, the use of ultrasound as a pretreatment technology for UV disinfection is hindered by its high energy demand. In this work, the addition of several organic solutes, including 1-propanol, 1-hexanol, and pentyl acetate, to promote the cavitation process and to improve the breakage of wastewater particles was examined. It was found that the enhancement in the cavitation and the breakage efficiency of particles was positively related to the hydrophobicity of surfactant. In addition, particle breakage was a function of the concentration of surfactant as well as the delivered ultrasound energy density. Sonication of wastewater samples containing small amounts of 1-hexanol (16 mM) or pentyl acetate (12 mM) increased the UV disinfection efficiency and decreased the required UV dose to achieve the disinfection target by a factor of more than 2.5.

In this study, a comparison of the photocatalytic activity efficiency of the catalysts WO₃/TiO₂, Fe₂O₃/TiO₂, and TiO₂ in the degradation of the herbicide 2,4-D and its main by-product (2,4-dichlorophenol, 2,4-DCP), under natural sunlight, visible, and UV light, was carried out. The catalysts were synthesized by the sol-gel method. All the catalysts showed anatase crystalline phase, and they exhibited similar values of band gap, specific surface area, and crystallite size; however, different photocatalytic activity was observed under the different light sources. Complete degradation of 2,4-D and near to 89% of mineralization using WO₃/TiO₂ and Fe₂O₃/TiO₂ was achieved after 150 min under solar light, while using TiO₂ sol-gel, lower degradation rate was obtained. By using artificial light (UV and visible lamp), the degradation and mineralization rates were lower than those obtained under natural sunlight. The produced 2,4-DCP intermediate was completely degraded after 240 min under sunlight only with the modified catalysts.

In the present study, the ability of Hibiscus rosa-sinensis leaf extract (HLE) to act as a natural coagulant for the water treatment was tested. Synthetic turbid solutions were prepared using kaolinite, and the efficiency of HLE was examined for low and high turbid solutions. HLE was very effective in high turbid solutions than in low turbid water and follows enmeshment mechanism of destabilization. An insignificant effect of alkalinity on the performance of HLE was observed. The addition of NaCl increased the dissolution of coagulation active species and enhanced the efficiency of HLE, significantly. Hydroxyl and carboxyl groups present in HLE were the major functional groups responsible for the bonding between coagulant and kaolinite. The efficiency of alum was very high compared to that of HLE in both turbid solutions. But the optimal dosages of HLE were lesser than that of alum. Thus, HLE can be used as a coagulant aid for the effective treatment of water.

Acute (24 h) and sublethal (35 days) effects of cadmium chloride (CdCl₂) were examined in Cirrhinus mrigala using various endpoints (accumulation pattern, thyroid hormones (THs), and antioxidants). The mean concentrations of CdCl₂ for 24 and 96 h were found to be 35.974 and 22.387 mg L⁻ˡ, respectively. LC50 concentration of CdCl₂ for 24 h (35.97 mg L⁻ˡ) was used for the acute study. For the sublethal studies, fish were exposed to 3.59 mg L⁻¹ (Treatment I) and 7.19 mg L⁻¹ (Treatment II) corresponding to 1/10th and 1/5th of 24 h LC50 of the CdCl₂. During acute exposure, higher accumulation of CdCl₂ was noticed in the gill, liver, and kidney of C. mrigala, which is found in the order gill > liver > kidney tissues. Similarly, in sublethal treatments (Treatment I and II), a concentration and time-dependent increase of CdCl₂ accumulation was noticed in the order of gill > liver > kidney. GSH, GST, and GPx activities were found to be relatively lower from the treated groups in both acute and sublethal treatments. However, LPO activity was significantly increased in CdCl₂-treated fish C. mrigala. Further, plasma T₃ reduction was more pronounced than T₄ in acute study. During sublethal treatments, both T₄ and T₃ levels showed a continuous decrease as the exposure period extended. All the values in this study were statically significant (P < 0.01 and P < 0.05).

Herein, we report the synthesis of carbon spheres (CS) using a relatively low-temperature hydrothermal technique using lactose as precursor pre-treated with HCl. The successful synthesis, spherical morphology, porous morphology, and monodispersed nature of CS were confirmed via scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Isoelectric point (IEP) was determined as 3.8, and at neutral conditions the prepared carbon particles are negatively charged at − 43 ± 2.50 mV. Owing to their spherical morphology, almost uniform distribution and negatively charged surface at neutral conditions, the prepared CS were used as adsorbent for the removal of methylene blue (MB) and Geimsa stain (GS) from aqueous environments at pH 7. It was shown that CS has 97% adsorption capability for GS, whereas for methylene MB, the maximum adsorption capacity was 67% for 0.1-g CS from 50-ppm dye solutions in DI water. The adsorption studies revealed that the Langmuir and modified Fruendlich (MFE) adsorption models resulted in considerably high linear correlation coefficient (r ²) values and the efficient adsorption of positively charged species on CS can be represented better with the MFE model. Graphical Abstract Carbon spheres from D-lactose for environmental application

Anaerobic digestion (AD) and dewatering are the most common and widely applied sludge treatment methods in wastewater treatment plants (WWTPs). However, sludge dewatering has been recognised as one of the most expensive and least understood processes. Therefore, this study investigated the dewatering performance of synthetic sludge in comparison with anaerobically digested sludge when conditioned with chitosan, organic polyelectrolytes and inorganic metal cations. Capillary suction time (CST), turbidity, electrical conductivity, zeta potential, cake solids content and particle size were used to assess sludge dewatering performance and to determine the optimum conditioner dose. The effectiveness of sludge conditioning was evaluated by batch experiments using a series of 250-mL jar test beakers. Both synthetic sludge and AD sludge exhibited similar trend but little different extent of dewaterability when conditioned with low molecular weight (MW) chitosan. The low MW and medium MW chitosans, commercial cationic polyelectrolytes and trivalent metal cations (Al³⁺, Fe³⁺) demonstrated as effective conditioning agents with good sludge dewaterability. When assessing the dewaterability measurement parameters using synthetic sludge, the optimal dosage was found at the range of 15 to 20 g-chitosan/kg-dry sludge where the values of CST, turbidity and cake solids content were attained between 6.6 and 11.0 s, 35.4–40.6 NTU, and 24.3–25.3%, respectively. The application of cationic polyelectrolytes and trivalent metal cations generally improved the sludge dewaterability via charge neutralisation and polymer bridging. This study also demonstrated that less complex chemically controlled synthetic sludge can be used for studying the final properties of complex real digested sludge.

Large volumes of excavated rock are produced as a result of road and railway tunnel construction in Hokkaido, Japan. Due to the geological condition of this region, these rocks have often undergone hydrothermal alterations, causing them to contain elevated amounts of hazardous elements including arsenic (As). Therefore, these excavated rocks are potentially hazardous waste, and proper disposal methods are required. In this article, performance of unsaturated river sediment on immobilizing As from hydrothermally altered rock is evaluated using laboratory column experiments and Hydrus-1D. The results reveal that the river sediment significantly reduces As migration. Arsenic retarded by river sediment was observed in three patterns. The first was an adsorption onto minerals originally contained in the river sediment. The next pattern was a combination of reduction of As generation by oxidation of As bearing-minerals, irreversible adsorption, and adsorption onto newly precipitated Fe oxy-hydroxide/oxide. The last pattern led to a further depletion of As leached from the rock layer due to a shift in the majority of the As generation mechanism from dissolution to oxidation in combination with a low concentration of oxygen in the rock layer. These patterns were satisfactorily evaluated by a Hydrus-1D model with reversible and irreversible adsorptions. The information from this work is effective in designing and establishing a reasonable technique for the disposal of hydrothermally altered rocks.

Biochars are adsorptive solids potentially of benefit to soil microbes by providing improved nutrient retention, a carbon substrate and contaminant adsorption. A 28-day incubation experiment gauged the interactive effects of biochar application and contaminants on the microbial biomass and respiration of a sandy loam soil. Soil was amended with 250 mg/kg phenol or p-nitrophenol (two toxic but nevertheless biodegradable organic contaminants) or 50 mg/kg cadmium or copper. Biochar application generally caused increased microbial respiration and biomass relative to non-amended controls. Of the heavy metal-amended soils, Cu effected significant reductions in microbial biomass carbon and basal respiration, which were improved with concurrent biochar amendment. The biochar’s functional groups are likely to have mitigated the metals’ negative effects via complexation and sorption, while the soil’s proportion of negative pH-dependent sites was increased by the pH rise induced by biochar application, allowing more cationic retention. Organic contaminant-spiked soils had higher microbial biomass-specific respiration without biochar amendment, indicating that surviving microbes utilised the compounds and necromass as substrates. Paranitrophenol proved to be particularly toxic without biochar application, causing marked reductions in the microbial quotient and biomass carbon. Remarkably, concurrent biochar and pNP application led to hugely increased microbial biomass carbon and nitrogen, significantly higher than those in contaminant-free replicates. It is likely this arose from biochar sorbing the contaminant and allowing its microbial utilisation as a carbon and nitrogen source, stimulating growth. Biochar application is a highly promising strategy for reducing the soil microbial toxicity of heavy metals and aromatic organic contaminants, particularly p-nitrophenol.