Heavy metal contamination of water bodies and groundwater is a major concern of the modern world. Rhizofiltration—the use of plant root system to remove/extract pollutants from wastewater—has proven advantages over conventional methods of treatment. However, commercialization of this in situ remediation technology requires a better understanding of plant–metal interactions especially on the ability of different plant species to accumulate metals at different parts of the plant system which is critical for the successful remediation of contaminated medium. Many aquatic and terrestrial plants have been reported to accumulate heavy metals when grown hydroponically. Therefore, a batch experiment with different concentrations of lead and a nutrient film technique (NFT) experiment with recycling of wastewater were employed in this study in order to investigate the rhizofiltration of lead-containing wastewater using Plectranthus amboinicus, an aromatic medicinal plant. Results show that P. amboinicus is tolerant to a wide range of lead concentrations and nutrient deficiency. The plant accumulates considerable amount of lead, particularly in the roots, and translocation to the stem and leaf was limited, indicating that the use of leaves/above-ground parts of the plant for medicinal purposes is not hindered by its ability to remove lead from the soil or water. The study also suggests that the plant can be considered for the clean-up of lead-contaminated wastewater in combination with safe biomass disposal alternatives.

Understanding the influence of arbuscular mycorrhizal (AM) fungi on the expressions of the dominant plant-related genes under heavy metal (HM) stress is important for developing strategies to reclaim polluted sites. In this study, we cloned full-length cDNAs of phytochelatin synthase gene (PCS1) and Actin of Sophora viciifolia Hance., a predominant plant in Qiandongshan lead and zinc mine, by rapid amplification of cDNA ends. Consequently, we studied the response of SvPCS1 to Funneliformis mosseae inoculation under lead stress (0, 50, and 200 μM Pb(NO₃)₂) at different durations (1, 3, and 7 days) using quantitative reverse-transcription polymerase chain-reaction (qRT-PCR) technique. The Pb concentrations and chlorophyll fluorescence parameters were also measured to assay Pb toxicity to Sophora viciifolia. We found that Pb concentrations in roots increased with increasing Pb application and the durations; the F ᵥ /F ₘ , F ᵥ /F ₒ , qP, and Y(II) decreased; NPQ rose with increasing Pb concentrations; mycorrhizal symbiosis alleviated the Pb toxicity to plants; and SvPCS1 was constitutively expressed in the roots. It was also found that F. mosseae inoculation could promote the expression of SvPCS1 with the concentration ≤200 μM at the exposure time shorter than 7 days.

The effect of copper oxide nanoparticles (CuONPs) on physiological and molecular level responses were studied in Arabidopsis thaliana. The seedlings were exposed to different concentrations of CuONPs (0, 0.5, 1, 2, 5, 10, 20, 50, and 100 mg/L) for 21 days in half strength Murashige and Skoog medium. The plant biomass significantly reduced under different concentrations (2, 5, 10, 20, 50, and 100 mg/L) of CuONPs stress. Exposure to 2, 5, 10, 20, 50, and 100 mg/L of CuONPs has resulted in significant reduction of total chlorophyll content. The anthocyanin content significantly increased upon exposure to 10, 20, 50, and 100 mg/L of CuONPs. Increased lipid peroxidation was observed upon exposure to 5, 10, and 20 mg/L of CuONPs and amino acid proline content was significantly high in plants exposed to 10 and 20 mg/L of CuONPs. Significant reduction in root elongation was observed upon exposure to 0.5–100 mg/L of CuONPs for 21 days. Exposure to CuONPs has resulted in retardation of primary root growth, enhanced lateral root formation, and also resulted in loss of root gravitropism. Staining with phloroglucionol detected the deposition of lignin in CuONPs-treated roots. Histochemical staining of leaves and roots of CuONPs-exposed plants with nitroblue tetrazolium and 3′3′-diaminobenzidine showed a concentration-dependant increase in superoxide and hydrogen peroxide formation in leaves and roots of CuONPs-exposed plants. Cytotoxicity was observed in root tips of CuONPs-exposed plants as evidenced by increased propidium iodide staining. Real-time PCR analysis showed significant induction of genes related to oxidative stress responses, sulfur assimilation, glutathione, and proline biosynthesis under CuONPs stress.

In the present study, the photolysis of carbofuran has been undertaken under sunlight conditions and at the surface of model supports such as clay films and different soils collected from two different sites in Morocco (Tirs and Dahs). In all conditions, an efficient degradation occurred owing to direct light absorption and also to photoinduced processes involving either clays or natural organic matter moities. On kaolin films, the photodegradation kinetics appears to follow a first-order process that clearly depends on the film thickness. The diffusion of carbofuran from the lower part to the illuminated surface was found to be negligible when compared to the photolysis process within the range of 20–70 μm. Thus, the photolysis rate constant at the surface of the solid support, k⁰, was evaluated to be 7.0 × 10⁻³ min⁻¹. Under these experimental conditions, the quantum yield was found equal to 2.1 × 10⁻⁴. On soil surfaces, the disappearance rate constant was mainly attributed to photoinduced processes arising from natural organic matter. From the analytical point of view, the products were formed through (1) hydroxylation on the aromatic ring, (2) homolytic scission of the carbamate C–O bond leading to radical species formation, and (3) photohydrolysis of the carbamate C–O bond.

In this study, geophysics, geochemistry, and geostatistical techniques were integrated to assess seawater intrusion in Kapas Island due to its geological complexity and multiple contamination sources. Five resistivity profiles were measured using an electric resistivity technique. The results reveal very low resistivity <1 Ωm, suggesting either marine clay deposit or seawater intrusion or both along the majority of the resistivity images. As a result, geochemistry was further employed to verify the resistivity evidence. The Chadha and Stiff diagrams classify the island groundwater into Ca-HCO₃, Ca-Na-HCO₃, Na-HCO₃, and Na-Cl water types, with Ca-HCO₃ as the dominant. The Mg²⁺/Mg²⁺+Ca²⁺, HCO₃ ⁻/anion, Cl⁻/HCO₃ ⁻, Na⁺/Cl⁻, and SO₄ ²⁻/Cl⁻ ratios show that some sampling sites are affected by seawater intrusion; these sampling sites fall within the same areas that show low-resistivity values. The resulting ratios and resistivity values were then used in the geographical information system (GIS) environment to create the geostatistical map of individual indicators. These maps were then overlaid to create the final map showing seawater-affected areas. The final map successfully delineates the area that is actually undergoing seawater intrusion. The proposed technique is not area specific, and hence, it can work in any place with similar completed characteristics or under the influence of multiple contaminants so as to distinguish the area that is truly affected by any targeted pollutants from the rest. This information would provide managers and policy makers with the knowledge of the current situation and will serve as a guide and standard in water research for sustainable management plan.

Although the foam formation on surface waters nowadays is not comparable with the foam “mountains” in the 1970s, it still is an issue of water quality concern. A drawback in the discussion is the lack of methods to assess instream foam formation and foam emitted by point sources. Foam formation on a transboundary river in Austria led to an intensive study resulting in two parameters to quantify instream and emitted foam. Foam potential is introduced as emission parameter that is defined as flow rate of river water, which can foam due to an effluent’s discharge. The foam index (FI) represents a parameter to assess the foam on the river and allows a semi-quantitative differentiation between the varying foaming conditions. This publication will present the developed methods and show some results to prove their accuracy and applicability.

The main objective of the review is to document, assess and analyze the results of the previously reported data on levels of different pesticides in selected fruits and vegetables from Pakistan. The findings of the previous studies clearly indicated that more than 50 % of the samples were contaminated with organophosphate, pyrethroids and organochlorine pesticides. Many studies reported that among fresh fruits and vegetables tomato, apple, melon, mango, grapes, and plum crossed the FAO/WHO permissible limits for these contaminants residual levels. The comparison of other regions showed that observed levels were found above maximum residue limits (MRLs) in 50 % of the samples but were in agreement with the studies from neighboring countries like China and Bangladesh. Higher hazard risk index (HRI) values were calculated for dieldrin, methamidophos, o,p′-DDT, diazinon and p,p′-DDT in apple, mango, banana, melon, potato and onion. The review also highlights that data on pesticide residues in foodstuff is scarce which should be overcome by further extending studies from different areas of Pakistan. In order to ascertain the provision of food suitable for human consumption, it is imperative to monitor pesticides in food commodities by the country’s authorities and enforce guidelines based on permissible limits.

Biologically based wastewater treatment systems are considered a sustainable, cost-effective alternative to conventional wastewater treatment systems. These systems have been used and studied for the treatment of urban sewage from small communities, and recently, it has been reported that they can also effectively remove emerging organic contaminants (EOCs). EOCs are a new group of unregulated contaminants which include pharmaceutical and personal care products, some pesticides, veterinary products, and industrial compounds among others that are thought to have long-term adverse effects on human health and ecosystems. This review is focused on reporting the ability of biologically based wastewater treatment systems to remove EOCs and the main elimination mechanisms and degradation processes (i.e., biodegradation, photodegradation, phytoremediation, and sorption) taking place in constructed wetlands, ponds, and Daphnia and fungal reactors.

We studied the behaviour of oxyfluorfen herbicide at a rate of 4 l ha⁻¹on biological properties of a Calcaric Regosol amended with two edaphic biostimulants/biofertilizers (SS, derived from sewage sludge; and CF, derived from chicken feathers). Oxyfluorfen was surface broadcast on 11 March 2013. Two days after application of oxyfluorfen to soil, both biostimulants/biofertilizers (BS) were also applied to the soil. An unamended soil without oxyfluorfen was used as control. For 2, 4, 7, 9, 20, 30, 60, 90 and 120 days of the application of herbicide to the soil and for each treatment, the soil dehydrogenase, urease, β-glucosidase and phosphatase activities were measured. For 2, 7, 30 and 120 days of the application of herbicide to the soil and for each treatment, soil microbial community was determined. The application of both BS to soil without the herbicide increased the enzymatic activities and soil biodiversity, mainly at 7 days of beginning the experiment. However, this stimulation was higher in the soil amended with SS than for CF. The application of herbicide in organic-amended soils decreased the inhibition of soil enzymatic activities and soil biodiversity. Possibly, the low-molecular-weight protein content easily assimilated by soil microorganisms is responsible for less inhibition of these soil biological properties.