Refine search
Results 2261-2270 of 4,308
Phytoremediation Potential of Helianthus annuus and Hydrangea paniculata in Copper and Lead-Contaminated Soil Full text
2017
Forte, Jenna | Mutiti, Samuel
This study was conducted to assess the hyperaccumulation and phytoremediation potential of copper (Cu) and lead (Pb) in Hardy ‘Limelight’ Hydrangea (Hydrangea paniculata) and the common sunflower (Helianthus annuus). The study also investigated the capacity of these two plants to transpire the metals in a temperature-controlled greenhouse. Plants were grown for 4 weeks and periodically watered with known elemental concentrations of copper oxide nanoparticles, copper sulfate, and lead nitrate. Both H. annuus and H. paniculata accumulated significant amounts of Cu and Pb to be classified as hyperaccumulator species. H. annuus took up significant amounts of Cu in the shoots, specifically the leaves (Cu max. = 1368 ppm), and easily translocated it from stem to leaf (translocation factor (TF) ranged from 2.7 to 81.0). Pb was not as easily taken up and translocated (TF = 0.6) as Cu was by this species. H. paniculata took up Cu and Pb in high concentrations but preferentially stored more metals in the stems (Cu max. = 1757 ppm; Pb max. = 780 ppm) than in the leaves (Cu max. = 126 ppm; Pb max. = 35 ppm). The translocation ability of H. paniculata was much lower for both metals compared to H. annuus. Both Cu and Pb transpired from H. annuus at concentrations of 0.04 and 0.005 ppm, respectively.
Show more [+] Less [-]Production of Energy and Biofertilizer from Cattle Wastewater in Farms with Intensive Cattle Breeding Full text
2017
de Mendonça, Henrique Vieira | Ometto, Jean Pierre Henry Balbaud | Otenio, Marcelo Henrique
This study evaluates the treatment efficacy and biogas yield of an integrated system composed of a plug-flow biodigester (with sludge recirculation) followed by polishing in a stabilization pond. The system was operated in real scale for 12 months at ambient temperature and under continuous flow. The volumetric yields of biogas varied according to the organic loads applied, between 114 and 294 Kg COD day⁻¹, reaching levels of 0.026 to 0.173 m³ m⁻³ day⁻¹, with concentrations of CH₄ between 56 and 70%. The monthly biogas productions were between 378.5 and 2186.1 m³ month⁻¹ equal to an energy potential of approximately 2070 to 19,168 KWh month⁻¹.The average yearly removals of BOD₅,₂₀ and COD by the integrated treatment system were 70 and 86%, respectively. The average annual removals of NH₄ and TKN were 88.5 and 85.5%, respectively. The pH values were always near neutral, and the alkalinity was in ranges propitious for anaerobic digestion. The results of this study indicate good efficacy in terms of removal of organic matter and nitrogen compounds, with the added benefits of generation of energy and use of the treated effluent as biofertilizer, enabling significant cost reductions to cattle farmers.
Show more [+] Less [-]Colloidal Carbon-Based Nanoparticles as Heavy Metal Adsorbent in Aqueous Solution: Cadmium Removal as a Case Study Full text
2017
Gargiulo, Valentina | Alfè, Michela | Lisi, Luciana | Manfredi, Carla | Volino, Sabato | Di Natale, Francesco
Hydrophilic carbonaceous nanoparticles (HNPs) of uniform sizes with a good degree of dispersion in water were produced from a commercial carbon black by nitric acid treatment. The surface treatment, performed at different reaction times, generates a variable number of oxygen functional groups, mainly carboxylic, which enhance the nanoparticles hydrophilicity and heavy metal adsorption capability. The HNPs were characterized by a number of analytical techniques, including FTIR spectroscopy, thermal and elemental analysis, N₂ adsorption, dynamic light scattering, and zeta-potential measurements. The acid–base properties of the functional groups on the HNPs surface were also investigated by coulometric–potentiometric titrations. Cadmium adsorption tests were carried out in stirred reactors containing colloidal aqueous suspensions of HNPs and HNPs supported over silica. The effects of several parameters, such as the cadmium concentration, the temperature, and the solution pH, were studied. Sorbents showed an appreciable cadmium adsorption capability at different temperatures and in a wide range of pH values comparable or superior to several carbon-based sorbents, indicating a feasible use in commercial units.
Show more [+] Less [-]Silica Nanoparticles Modified with Trithiocyanuric Acid as a Potential Adsorbent for Removal of Ag+ from Aqueous Solutions Full text
2017
Fu, Likang | Zhang, Libo | Wang, Shixing | Peng, Jinhui | Zhang, Gengwei
Surface modification of the silica nanoparticles was performed using trithiocyanuric acid (TCA-SNPs) so as to enhance the adsorption of Ag⁺ from aqueous solutions. The surface modification to the adsorbent was characterized by Fourier transform infrared spectroscopy, transmission electron microscope, and X-ray photoelectron spectroscopy. The Ag⁺ adsorption capacity was found to increase with increase in the solution pH, with the optimal pH being 5.0. The Ag⁺ adsorption isotherm was generated at 25 °C at the optimal solution pH and the maximum adsorption capacity was found to be 80 mg/g, significantly higher than the adsorption capacity reported for other adsorbents in literature. The increase in adsorption capacity was attributed to the presence of thiol groups on the surface of the modified adsorbents. Additionally, the adsorption kinetics was estimated at 25 °C, which indicated very high rates of adsorption initially, with rapid reduction in rate of adsorption with time. Both adsorption isotherms as well as the adsorption kinetics were modeled with popular models. The adsorption isotherm was found to match with the Langmuir model while the adsorption kinetics was found to match with the pseudo-second-order kinetic model. The adsorption-desorption cycles indicate the TCA-SNPs to be stable adsorption performance and retain high adsorption efficiency ensuring commercial adoption. A relatively low adsorption of other ions such as Mn²⁺, Cu²⁺, Ni²⁺, Co³⁺ as compared to Ag⁺ was ensured.
Show more [+] Less [-]A Greener UV and Peroxide-Based Chemical Oxygen Demand Test Full text
2017
Carbajal-Palacios, Patricia | Balderas-Hernández, Patricia | Roa-Morales, Gabriela | Ibanez, Jorge G.
Water quality assessment typically includes the determination of chemical oxygen demand (COD) by oxidation of organic matter with Cr(VI) in an acidic medium followed by digestion. Unfortunately, the required reagents are harmful and the reaction times are rather long. We investigated earlier the use of H₂O₂ as a more environmentally friendly oxidizing agent to replace the hazardous chromates. In the present study, we have furthered this possibility by incorporating the use of H₂O₂ in the presence of UV light. A protocol has been devised and tested with standards and real samples that replaces toxic Cr(VI), halves the amount of silver sulfate required, and greatly reduces the necessary reaction time, thus yielding a faster and more environmentally sound method.
Show more [+] Less [-]Efficient Removal of Lead(II) Ions from Aqueous Solutions Using Methyl-β-Cyclodextrin Modified Graphene Oxide Full text
2017
Nyairo, Wilfrida Nyanduko | Eker, Yasin Ramazan | Kowenje, Chrispin | Zor, Erhan | Bingol, Haluk | Tor, Ali | Ongeri, David Mokono
Graphene oxide (GO) and graphene oxide modified with methyl-β-cyclodextrin denoted as GO-mβCD were prepared and applied as adsorbents to determine the adsorption characteristics of Pb(II) from aqueous solutions. The characteristic results of Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), Raman spectroscopy, and scanning electron microscopy (SEM) showed that mβCD was successfully physically attached to GO to form the GO-mβCD nanocomposite. The adsorption equilibrium and kinetics of the adsorbents were well described by Langmuir isotherm and pseudo-second-order models, respectively. The maximum Pb(II) adsorption capacity of GO-mβCD (at pH = 6 and room temperature) was determined as 312.5 mg/g which was significantly higher than that of GO (217.39 mg/g). This indicates that the modification of GO with mβCD enhances the adsorption capacity of GO. The desorption studies show that the adsorbent GO-mβCD can be used for at least five cycles with non-significant loss of its initial adsorption capacity for Pb(II) ions.
Show more [+] Less [-]Biosorption of Toxic Metals by Water Lettuce (Pistia stratiotes) Biomass Full text
2017
Rodrigues, Ana Carolina Dornelas | Amaral Sobrinho, Nelson Moura Brasil do | Santos, Fabiana Soares dos | dos Santos, André Marques | Pereira, Ana Carolina Callegario | Lima, Erica Souto Abreu
Adsorption isotherms were constructed to evaluate the potential use of water lettuce (Pistia stratiotes) dry biomass for the biosorption of zinc and cadmium. One gram of dry biomass of this plant was treated with five increasing doses of zinc (1.8, 18, 50, 79, and 105 mg L⁻¹) and four doses of cadmium (0.01, 0.1, 1, and 10 mg L⁻¹), for nine collection times (1, 3, 6, 12, 24, 36, 48, 60, and 72 h). The levels of these metals were determined by atomic absorption spectrophotometry. To evaluate changes in the surface morphology of the dry biomass, scanning electron microscopy (SEM) images were taken of the samples subjected to the greatest contamination, and these were compared with the images of the samples without zinc and cadmium (control). The ISOFIT software was used to select the isotherm model that best fit the biosorption of metals by water lettuce dry biomass. The linear model was determined to be the best-fitting isotherm model, because it had the lowest corrected Akaike information criterion (AICc) value and a Akaike weight (AICw) value closest to one, which indicates the high affinity of the biosorbent for the adsorbates evaluated. The results for both metals demonstrated greater than 70% reductions in the concentrations of the metals in the contaminated solutions. The SEM images indicated changes in the morphology of the contaminated biomass, thus demonstrating the biosorption mechanisms and confirming the potential of the dry biomass of this plant for use in the remediation of solutions contaminated with zinc and cadmium.
Show more [+] Less [-]Dominant Characteristics Between Microcystis aeruginosa and Cyclotella Sp. Accompanying Dilution Process in Eutrophic Lake Full text
2017
Mikawa, Masahiro | Datta, Tania | Amano, Yoshimasa | Machida, Motoi
Although dilution of lake water has been used for improvement of water quality and algal blooms control, it has not necessarily succeeded to suppress the blooms. We hypothesized that the disappearance of algal blooms by dilution could be explained by flow regime, nutrient concentrations, and their interaction. This study investigated the effects of daily renewal rate (d), nitrogen (N) and phosphorus (P) concentration, and their interaction on the domination between Microcystis aeruginosa and Cyclotella sp. through a monoxenic culture experiment. The simulation model as functions of the N:P mass ratio and dilution rate (D) (calculated from d) was constructed, and the dominant characteristics of both species were predicted based on the model using parameters obtained in a monoculture experiment and our previous study. Results of monoxenic culture experiment revealed that M. aeruginosa dominated in all conditions (d = 5 or 15%; N = 1.0 or 2.5 or 5.0 mg-N L⁻¹; P = 0.1 or 0.5 mg-P L⁻¹) and the predicted cell densities were substantially correspondent to experimental data. Under various N:P ratios and D values, characteristics of domination for each species were predicted, indicating that Cyclotella sp. tended to be dominant under high P concentrations (P ≥ 0.36 mg-P L⁻¹) when the N:P ratio was less than 7.0, and M. aeruginosa could not form algal blooms at the N:P ratio ≤ 7.0 (N ≤ 0.7 mg-N L⁻¹). It was also suggested that the dilution rate leading to the Cyclotella sp. domination required 0.20 day⁻¹ or higher regardless of the N:P ratios. Graphical Abstract • M. aeruginosa and Cyclotella sp. could be a superior competitor in nutrient-limited and nutrient-rich conditions, respectively. • The simulation model in this study indicated that the predicted cell density and nutrient concentration were substantially correspondent to experimental data. • The model predicted that Cyclotella sp. tended to be dominant at the P ≥ 0.36 mg-P L⁻¹ when the N:P ratio was less than 7.0, and M. aeruginosa could not form algal blooms at the N:P ratio ≤ 7.0 (N ≤ 0.7 mg-N L⁻¹).
Show more [+] Less [-]Catalytic Effect of a Semiconductor on the Removal of Hexavalent Chromium from Aqueous Solution by γ-Ray Irradiation Full text
2017
Fei, Xionghui | Ling, Yongsheng | Shan, Qing | Hei, Daqian | Jia, Wenbao
Hexavalent chromium is a type of toxic chemical, it may cause allergies, hereditary genetic defects and cancer in humans by inhalation, and it is also a persistent danger to the environment. However, chromium metal, trivalent chromium and tetravalent chromium have low toxicities. In this study, semiconductor materials (quartz fibre and TiO₂) were added to a hexavalent chromium solution and the removal efficiency of hexavalent chromium as a function of the γ-ray irradiation dose, as well as the catalytic mechanism, was investigated. It was observed that the reduction of hexavalent chromium by γ-ray irradiation was largely promoted in the presence of semiconductor materials; the semiconductor materials act as catalysts under the gamma-ray irradiation. The hexavalent chromium in the solution can be converted to an insoluble precipitate by gamma-ray irradiation. These results are highly beneficial to apply semiconductor materials as catalysts for the removal of contaminants by radiation.
Show more [+] Less [-]Effects of Operation Variables and Electro-kinetic Field on Soil Washing of Arsenic and Cesium with Potassium Phosphate Full text
2017
Mao, Xinyu | Han, FengxiangX. | Shao, Xiaohou | Arslan, Zikri | McComb, Jacqueline | Chang, Tingting | Guo, Kai | Çelik, Ahmet
The operation variables and electro-kinetic field (EKF) were investigated to enhance the remediation of arsenic (As)- and cesium (Cs)-contaminated soils with soil washing. Extractant types, concentrations, liquid/solid (L/S) ratios, solution pH values, washing temperatures, and agitation modes were important criteria to determine the efficiency of soil washing. The KH₂PO₄ was proved to be a suitable alternative to Na₂EDTA in extracting As and Cs from contaminated soils. A 2-h washing with KH₂PO₄ at concentration of 0.01 M and L/S ratio of 20 mL g⁻¹ showed the most efficient washing performance. In addition, the lower solution pH, higher temperature, and ultrasound also favored soil washing of As and Cs with KH₂PO₄. The EKF greatly enhanced metals extraction with soil washing. It offered acidic soil environment around the anode areas for the release of soluble Cs from its soil solid-phase components before soil washing. Moreover, the alkalization around the cathode areas also benefited the desorption of stable As since labile As were mainly presented in anionic forms. The effect of CA for neutralizing OH⁻ was proved to be limited, while the reversed subsequent EKF process effectively alleviated Cs precipitation generated during the initial EKF process. It also effectively restored soil pH altered by the initial EKF. The overall EKF (4 V cm⁻¹) enhanced removal efficiency of As and Cs with soil washing from the anode area was 37 and 31%, respectively. Higher removal of As (52%) was obtained in the cathode area. Moreover, the reversed EKF resulted in another 28% removal of Cs in the initial cathode area which showed the capacity of EKF on continuous soil metal remediation.
Show more [+] Less [-]