Several research efforts have been conducted to monitor and analyze the impact of environmental factors on the heavy metal concentrations and physicochemical properties of water bodies (lakes and rivers) in different countries worldwide. This article provides a general overview of the previous works that have been completed in monitoring and analyzing heavy metals. The intention of this review is to introduce the historical studies to distinguish and understand the previous challenges faced by researchers in analyzing heavy metal accumulation. In addition, this review introduces a survey on the importance of time increment sampling (monthly and/or seasonally) to comprehend and determine the rate of change of different parameters on a monthly and seasonal basis. Furthermore, suggestions are made for future research to achieve more understandable figures on heavy metal accumulation by considering climate conditions. Thus, the intent of the current study is the provision of reliable models for predicting future heavy metal accumulation in water bodies in different climates and pollution conditions so that water management can be achieved using intelligent proactive strategies and artificial neural network (ANN) techniques.

Although membrane bioreactor (MBR) systems provide better removal of pathogens compared to conventional activated sludge processes, they do not achieve total log removal. The present study examines two MBR systems treating municipal wastewater, one a full-scale MBR plant and the other a lab-scale anaerobic MBR. Both of these systems were operated using microfiltration (MF) polymeric membranes. High-throughput sequencing and digital PCR quantification were utilized to monitor the log removal values (LRVs) of associated pathogenic species and their abundance in the MBR effluents. Results showed that specific removal rates vary widely regardless of the system employed. Each of the two MBR effluents’ microbial communities contained genera associated with opportunistic pathogens (e.g., Pseudomonas, Acinetobacter) with a wide range of log reduction values (< 2 to >5.5). Digital PCR further confirmed that these bacterial groups included pathogenic species, in several instances at LRVs different than those for their respective genera. These results were used to evaluate the potential risks associated both with the reuse of the MBR effluents for irrigation purposes and with land application of the activated sludge from the full-scale MBR system.

Yearly, huge amounts of sock refuse are discarded into the environment. Socks contain many molecules, and worn ones, which are rich in smell-causing bacteria, have a strong influence on animals’ behaviors. But the impacts of sock odor on the oviposition behavior of dengue vectors are unknown. We assessed whether Aedes albopictus changes its oviposition activity in response to the presence of used socks extract (USEx) in potential breeding grounds, using choice and no-choice bioassays (NCB). When furnished even chances to oviposit in two sites holding USEx and two others containing water (control), Ae. albopictus deposited significantly less eggs in USEx than in water sites. A similar pattern of oviposition preference was also observed when there were more oviposition options in water. When there were greater oviposition opportunities in USEx sites, Ae. albopictus oviposited preferentially in water. Females laid significantly more eggs during the NCB involving water than USEx. Also, significantly more mature eggs were retained by females in the NCB with USEx than in that with water. These observations strongly suggest the presence of molecules with either repellent or deterrent activities against Ae. albopictus females and provide an impetus to advocate the integration of used socks in dengue control programs. Such applications could be a realistic end-of-life recourse to reroute this waste from landfills.

Iron is an essential nutrient needed for multiple biological processes, but it is also an effective pro-oxidant in its reduced form. Environmental sources of iron toxic species include reduced soils from rice plantations, polluted natural areas from metal industry waste, or iron oxides used in soil bioremediation. Few studies have been conducted to assess the toxicity of iron species in insects. The present work aims to assess the oxidative stress effects of ferrous sulfate administered in drinking water after acute exposure (96 h) to adults of the insect model Oncopeltus fasciatus (Dallas). Mortality was higher in exposed groups and significantly associated with iron treatment (OR [95% CI]; 11.8 [6.1–22.7]). Higher levels of body iron content were found in insects exposed to ferrous sulfate, with an increase of 5–6 times with respect to controls. Catalase activity and lipid peroxidation (TBARS content), but not glutathione S-transferase activity, were significantly higher in exposed insects and significantly correlated with body iron content (Pearson coefficient of 0.68 and 0.74, respectively) and between them (0.78). The present work demonstrates that, despite the disruption in water and food intake caused by iron administration, this metal is accumulated by insect causing lipid peroxidation and eliciting an antioxidant response mediated by catalase.

The effects of repeated application of two types of sewage sludge, domestic and industrial (petrochemical, PSS) sludges, into paddy fields over a 5-year period on the soil properties and microbial ecology were studied and compared with conventional NPK fertilizer application. Soil organic matter and total nitrogen contents were significantly higher in the two sludge treatments than that in fertilized plots after 5 years. Soil concentrations of potentially toxic metals were low after 5 years of both sludge treatments, but the polycyclic aromatic hydrocarbons (PAHs) showed differences between the two sludge types. Concentrations of high-molecular-weight PAHs were significantly higher (p < 0.05) in the petrochemical sludge treatment than the domestic sludge treatment or the fertilizer control, although the total concentrations of 16 types of PAH in the petrochemical sludge treatment were only slightly higher than in the domestic sludge treatment and the control. The biological toxicity of soil dimethyl sulfoxide extracts from the petrochemical sludge treatment was also significantly higher (p < 0.05) than those from the fertilizer control and the domestic sludge treatment when evaluated using Photobacterium phosphoreum T3. Both types of sewage sludge increased soil microbial activity, but only the petrochemical sludge led to enrichment with specific PAH degraders such as Mycobacterium, Nocardioides, and Sphingomonas.

The photochemical fate of 16 pharmaceuticals and personal care products (PPCPs) found in the environment has been studied under controlled laboratory conditions applying a sunlight simulator. Aqueous samples containing PPCPs at environmentally relevant concentrations were extracted by solid-phase extraction (SPE) after irradiation. The exposed extracts were subsequently analysed by liquid chromatography combined with triple quadrupole mass spectrometry (HPLC-MS/MS) for studying the kinetics of photolytic transformations. Almost all exposed PPCPs appeared to react with a half-life time (τ ₁/₂) of less than 30 min. For ranitidine, sulfamethoxazole, diclofenac, warfarin, sulfamethoxazole and ciprofloxacin, τ₁/₂ was found to be even less than 5 min. The structures of major photolysis products were determined using quadrupole-time-of-flight mass spectrometry (QToF) and spectroscopic data reported in the literature. For diclofenac, the transformation products carbazol-1-yl-acidic acid and 8-chloro-9H-carbazol-1-yl-acetic acid were identified based on the mass/charge ratio of protonated ions and their fragmentation pattern in negative electrospray ionization (ESI⁻-QTOF). Irradiation of carbamazepine resulted in three known products: acridine, carbamazepine-10,11-epoxide, and 10,11-dihydro-10,11-dihydroxy-carbamazepine, whereas acetaminophen was photolytically transformed to 1-(2-amino-5 hydroxyphenyl) ethenone. These photochemical products were subsequently identified in seawater or fish samples collected at sites exposed to wastewater effluents on the Saudi Arabian coast of the Red Sea.

The diamondback moth, Plutella xylostella, is recognized as a widely distributed destructive insect pest of Brassica worldwide. The management of this pest is a serious issue, and an estimated annual cost of its management has reached approximately US$4 billion. Despite the fact that chemicals are a serious threat to the environment, lots of chemicals are applied for controlling various insect pests especially P. xylostella. An overreliance on chemical control has not only led to the evolution of resistance to insecticides and to a reduction of natural enemies but also has polluted various components of water, air, and soil ecosystem. In the present scenario, there is a need to implement an environmentally friendly integrated pest management (IPM) approach with new management tactics (microbial control, biological control, cultural control, mating disruption, insecticide rotation strategies, and plant resistance) for an alternative to chemical control. The IPM approach is not only economically beneficial but also reduces the environmental and health risks. The present review synthesizes published information on the insecticide resistance against P. xylostella and emphasizes on adopting an alternative environmentally friendly IPM approach for controlling P. xylostella in China.

Microplastics are widely spread in the environment, which along with still increasing production have aroused concern of their impacts on environmental health. The objective of this study is to quantify the number and mass of two most common textile fibers discharged from sequential machine washings to sewers. The number and mass of microfibers released from polyester and cotton textiles in the first wash varied in the range 2.1 × 10⁵ to 1.3 × 10⁷ and 0.12 to 0.33% w/w, respectively. Amounts of released microfibers showed a decreasing trend in sequential washes. The annual emission of polyester and cotton microfibers from household washing machines was estimated to be 154,000 (1.0 × 10¹⁴) and 411,000 kg (4.9 × 10¹⁴) in Finland (population 5.5 × 10⁶). Due to the high emission values and sorption capacities, the polyester and cotton microfibers may play an important role in the transport and fate of chemical pollutants in the aquatic environment.

To preferably catalyze the oxidation of NO to NO₂ in diesel after-treatment system, a series of CeO₂-MnO ₓ composite oxides was supported on silica-alumina material by the co-impregnation method. The maximum conversion of NO of the catalyst with a Ce/Mn weight ratio of 5:5 was improved by around 40%, compared to the supported manganese-only or cerium-only sample. And its maximum reaction rate was 0.056 μmol g⁻¹ s⁻¹ at 250 °C at the gas hourly space velocity of 30,000 h⁻¹. The experimental results suggested that Ce-Mn solid solution was formed, which could modulate the valence state of cerium and manganese and exhibit great redox properties. Moreover, the strong interaction between ceria and manganese resulted in the largest desorption amount of strong chemical oxygen and oxygen vacancies, leading to the maximum O α area ratio of 62.26% from the O 1s result. These effective oxygen species could be continually transferred to the surface, leading to the best NO catalytic activity of 5Ce5Mn/SA catalyst. Graphical abstract

A microscale zero-valent iron (mZVI)-based in situ reactive zone is a promising technology for contaminated groundwater remediation. Estimation of mZVI aging behavior after its injection into the subsurface is essential for efficiency and longevity assessments. In this study, batch tests were conducted to investigate the effect of initial pH on mZVI aging dynamics, as well as the formation and evolution of aging products over 112 days. Results indicated that mZVI aging accelerated with decreasing initial pH. Corrosion rates of mZVI particles under pH 6.0 and 7.5 were approximately two orders of magnitude higher than those observed at pH 9.0. The morphological, structural, and compositional evolution of mZVI particles in three systems (pH = 6.0, 7.5, and 9.0) were investigated using scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. In acidic and neutral solutions, a thick passivation layer with loosely and unevenly distributed aging precipitates was observed, and Fe₃O₄ was the final aging precipitate. Nevertheless, in alkaline solutions, minute aging precipitates were detected on the mZVI surface at 112 day. Characterization results suggested that mZVI was oxidized via the Fe⁰–Fe(OH)₂–Fe₃O₄ route. These findings shed new light on mZVI aging mechanisms, particularly its physicochemical characteristics and the structural evolution of mZVI in field-scale groundwater remediation applications.