From 1990 to 1994, a total of 21 sediment cores and 37 grab sediment samples were collected from the Milwaukee Harbor Estuary. Each sediment core was sectioned and dated using ²¹⁰Pb and¹³⁷ Cs radioisotope techniques. A total of 305 samples were analyzed for sixteen polycyclic aromatic compounds (PAHs). Grain size distribution, porosity, and total organic carbon content as measured by loss on ignition were also determined. The results provide a historical overview of the impact of industrialization in the Milwaukee area. Although highly variable, the concentration profile of PAHs show, in general, peaks in the 1950's through 1980's. The PAH concentrations have declined since then for most sediment cores. The current levels of total PAHs in most surface sediment samples range from 25 to 200 ppm. A few cores, some of which were collected in 1994, have an elevated PAH concentration at the surface. Toxicity of the surface sediments was evaluated by comparing with the benchmark values developed by the United States National Oceanic and Atmospheric Administration (NOAA). The most heavily contaminated area was found in the Kinnickinnic River between the Becher Street Bridge and the Wisconsin Wrecking Company Wharf. The highest total PAH concentration determined from seven vibra cores collected in this area ranges from 380 to 1000 ppm. The former Wisconsin Solvay Coke Company may have been a major point source of PAHs until the 1970's. Highway traffic and various industrial discharges also contribute to the sediment PAHs in this area.

The results of the first German moss monitoring programme to estimate heavy metal pollution in the Federal Republic of Germany were combined with other large-scale investigations carried out in Germany and then classified geographically in a new form. Using Monte Carlo assisted factor analysis, six factors indicating sources of pollution were identified from the sets of element data from the moss monitoring project (As, Cd, Cr, Cu, Fe, Ni, Pb, Ti, V, Zn) and the data sets for SO₂ and particulate. The geographic distribution patterns of the factor values showed the regions in which the various sources are to be found. By combining the data the primarily anthropogenic chromium concentrations of the mosses were compared with the mainly geogenic chromium concentrations of the stream sediments in the form of examples. After normalization, the transformed chromium concentrations were transferred to a map of the entire area using inverse distance weighting. Anthropogenic and geogenic influences are being discussed on the basis of the results.

The atmospheric heavy metal pollution of the Fraser Valley, B.C., Canada was assessed in 1993 by analyzing 62 samples of the common woodland moss Isothecium stoloniferum for lead, cadmium, nickel, zinc, chromium, and manganese. The latter two metals did not show a distinct regional distribution, but lead, cadmium, nickel, and zinc showed distinct pattern along a west-east gradient. High values were found in the metropolitan Vancouver area, located in the west of the study region. Significantly lower values were recorded for mosses from the eastern more rural areas of the Fraser Valley. Metal pollutants are likely to be contained close to their emission sources by alternating south-east, north-west winds. Highest values overall were found in the North Shore Mountains, adjacent to Vancouver. This was related to higher precipitation and short range pollutant transport from the industrialized, heavily populated areas in the floodplain of the Fraser River.

The Henry's law constant of trichloroacetic acid [K′H (mol kg⁻¹ atm⁻¹) for the equilibrium CCl₃COOH₍g₎ ⇌ CCl₃COOH₍ₐq₎] has been determined from measured partial pressures over aqueous solutions at 298.15 K and 308.15 K. Its value is given by: ln(K′H) = (11.21 ± 0.5) – 8.66 × 10³ (l/Tᵣ – l/T) where T (K) is temperature and Tᵣ is equal to 298.15 K, for an aqueous phase dissociation constant (Kₐ) of 0.55 mol kg⁻¹ determined from literature osmotic coefficient and electromotive force data. Accuracy is estimated to be 4–30% in the product K′HKₐ. Trichloroacetic acid is highly soluble and will partition strongly into aqueous atmospheric aerosols, and completely into fog and cloud water. Its occurrence and transport in the environment are therefore to be associated primarily with liquid phases.

A pilot-plant-scale study of combined sulfur dioxide/nitrogen oxides (SO₂/NOₓ) removal has been performed by the Dravo Lime Company at the Cincinnati Gas and Electric Company's Miami Fort Station in North Bend, Ohio. This study used Dravo's patented Thiosorbic® lime process along with Argonne National Laboratory's (ANL's) patented process for combined SO₂/NOₓ removal using the chelate ferrous·ethylenediaminetetraacetate (Fe·EDTA). For approximately nine months, scrubbing tests were carried out, and waste samples were collected. Waste testing at ANL involved two types of long-term chemical stability experiments. In one test, the gas-phase composition above several different samples was studied by mass spectrometry over 22 months. Unexpectedly, production of carbon dioxide and hydrogen sulfide was observed in some of the samples. The other experiment involved solid-phase leaching. Samples were stored for up to 14 months before leaching. Each leachate was tested for total Kjeldahl nitrogen and for the nitrogen-containing ions nitrite, nitrate, and ammonium. Significant amounts of ammonium ions were found in two of the samples. Total leachable nitrogen was found to stabilize after about the first 7 months of storage.

A study was carried out in order to estimate the presence of enteric and non-enteric indicators in the water distribution systems of Western Greece and to evaluate different methods for culture and isolation of coliforms in that region, under several incubation conditions and using different media. According to the different media and techniques used, the numbers of water samples found unsafe for consumption represented 21, 17 and 10% of the total, when mT7 agar, M-Endo agar LES (Membrane Filtration technique) and Most Probable Number (MPN) techniques were used, respectively. In one third of the samples oxidase positive microorganisms were present, which were almost eliminated by using anaerobic incubation of the media. Faecal streptococci were found only in 5% of the samples tested. The MPN technique proved to be significantly less efficient in recovering the coliform colonies than the Membrane Filtration (MF) technique (x² = 125.758 < 182.405). The use of m-Endo agar LES and mT7 agar showed no statistically significant difference in detecting total coliforms (x² = 162.55 > 162.422). However, a larger mean number of colonies per sample developed on mT7 agar, indicating that the latter medium should be used in our region for the detection of total coliforms.