This article discusses the major challenges related to greenhouse gas (GHG) emissions in the electricity sector and their impact on global climate change. The electricity sector is responsible for about a quarter of total global GHG emissions. To address these challenges, Life Cycle Assessment (LCA) is used to measure the environmental impact of different energy sources and electricity generation and distribution processes. The circular economy is presented as a promising approach to reducing the carbon footprint of the electricity sector. By optimizing the use and value of materials throughout their life cycle, this approach contributes to waste minimization and resource efficiency. Morocco is committed to reducing its GHG emissions and has adopted policies and regulatory frameworks to combat climate change. This study aims to calculate the climate change impacts of electricity distribution phases by applying a life-cycle approach to the case of an electricity distribution company in Morocco. This assessment makes it possible to identify significant contributors from each area. In the context of this company, it is a question of demonstrating how the application of the principles of the circular economy concepts contributes to the reduction of greenhouse gas emissions, in particular, that of scope 3. This study may be useful for other similar companies.

SCS-curve number (CN) is one of the most well-liked and commonly applied methods for estimating surface runoff. The present study aims to calculate surface runoff using SCS-CN watershed-based calculation and geospatial technology in the Kurumballi sub-watershed Shivamogga District of Karnataka, India. The study area covers about an area of 47.67 sq. km. The union of land use/land cover classification with hydrological soil groups (HSG) yields the runoff estimation by the SCS-CN curve approach. This method calculates the runoff volume from the land surface flows into the river or streams. Moreover, the study area’s delineation of runoff potential zones was done using the thematic integration method. Different thematic layers were used, including lithology, geomorphology, soil, slope, land use and land cover, drainage, surface water bodies, groundwater contour, and isohyetal maps. Furthermore, associating it with the SCS-CN technique, the total surface runoff volume of the study area was estimated. The total surface runoff volume in the study area is 21065849.7 m3. To this study, thematic integration with the SCS-CN approach to estimate runoff for watersheds is valuable for improving water management and soil conservation.

The primary goal of this research is to isolate mycotoxin-producing fungus from the Nagavali River. Examining isolated fungi involved analyzing their mycelium growth on culture media and detailed microscopic inspection. We employed PCR analysis utilizing universal primers ITS1 and ITS4 to accurately identify the species. Furthermore, we sequenced the amplified ITS region and rigorously analyzed the sequences using NCBI-BLASTn and the ITS2 database. The analysis found a high 96.38% genetic similarity to the Aspergillus flavus strain, resulting in a 600-base pair fragment size. The sequence was given the accession number OR536222 in the NCBI GenBank database. Phylogenetic analysis was performed to ascertain the particular strain of A. flavus and its source. Remarkably, this analysis led to the identification of a single new strain gene, which represents a novel discovery in the field of fungal research. These results underscore the vital significance of molecular techniques in promptly and precisely identifying organisms. This research enhances our understanding of mycotoxin contamination in water, providing valuable insights to improve detection and prevention strategies. It accentuates the overarching importance of conserving our water resources and upholding ecological equilibrium, ultimately safeguarding the well-being of both humanity and the environment.

Aging oil is a common pollutant in petrochemical enterprises due to its severe emulsification and flocculation, poor settling performance, low oil recovery rate, and high difficulty in treatment. This article adopts the method of mechanical, ultrasonic, and chemical coupling demulsification to treat aging oil, with the water content and oil recovery rate of the treated aging oil as the inspection indicators. The experiment shows that when the oil-water ratio is 1:4, the heating temperature is 50℃, the stirring speed is 180rpm, the ultrasonic frequency is 25kHz, the power is 40W, the ultrasonic time is 25min, and the pH is adjusted to 3-4. The additional amount of FeSO4 is 160mg/L, the additional amount of H2O2 is 0.11%, and the heating stirring reaction is 40min. When the dosage of cationic PAM with an ion degree of 50 is 35mg/L, the centrifugation speed is 3200rpm. The centrifugation time is 20 min, the crude oil recovery rate after aging oil treatment can reach over 94.6%, and the water content of the treated crude oil is less than 0.5%, meeting the standards for crude oil gathering and transportation in China. The oil content in the water generated after aging oil treatment is about 150 mg.L-1, the suspended solids content is 200 mg.L-1, the oil content in the residue is 6%, and the water content is 53%. By analyzing the appearance of aging oil before and after treatment, it was found that when using this process to treat aging oil, the original spatial cross-linking network structure of the aging oil was broken, allowing the water droplets wrapped in the oil to be released, thereby significantly reducing the water content in the recovered oil and improving the oil recovery rate.

The stabilization of toxic metals in the stable matrices is quite well-known. Research on copper and cadmium stabilization in the CaO-CuO-SiO2 and CaO-CdO-SiO2 composites was conducted to study the characteristics of CaO-CuO-SiO2 and CaO-CdO-SiO2 composites as well as the Cu and Cd metals stabilization in the hydrated composites. The composites of CaO-CuO-SiO2 and CaO-CdO-SiO2 were synthesized by the solid-state reaction method. A stoichiometric amount of CaO, SiO2, Cu(NO3)2, and CdO were calcined at 1050°C for 4 hours. The synthesized compounds were further hydrated in a soaking time of 30, 60, and 90 days. The hydration produced calcium silicate hydrate that can stabilize metals. The Cu and Cd stability in CaO-CuO-SiO2 and CaO-CdO-SiO2, respectively, were tested using the Toxicity Leaching Procedure (TCLP) method. The hydrated and hydrated composite characterizations were performed using X-ray diffraction (XRD), Fourier Transform Infra-Red Spectrophotometer (FTIR), and Scanning Energy Mocroscopy-Energy Dispersive X-ray analyzer (SEM-EDX) and the Atomic Absorption Spectroscopy (AAS) methods. The composites mainly consist of Ca3SiO5, Ca2SiO4, Ca(OH)2, SiO2, and metal oxide of CuO, Cu2O, and CdO. The composites were able to stabilize ~100% of the heavy metals of Cu and Cd.

Biochar (BC) is a well-established physical treatment method. The high-cost BC limits their use as adsorbents in wastewater. Thus, deriving BC from cheap and locally available waste materials is needed to develop a feasible waste removal technology. Nowadays, BC technology makes it possible to envision a new strategy to manage invasive plants by converting them into value-added products like BC. Hence, the present study was designed to evaluate the potential utilization of BC as an efficient filter medium made by invasive aquatic plants, Salvinia spp., and Eichhornia spp. A mass of 50 g of prepared activated and nonactivated BC was incorporated in a sand and gravel filter to treat rubber-manufactured wastewater. Wastewater was passed through the filter, and both raw and treated water samples were analyzed for pH, Total Suspended Solids (TSS), Biological Oxygen Demand (BOD5), Chemical Oxygen Demand (COD), Total Kjeldahl Nitrogen (TKN), Ammoniacal-Nitrogen (NH3-N), Electrical Conductivity (EC), Total Dissolved Solids (TDS), Total Phosphates (TP), Nitrate (NO3-N), turbidity and heavy metals (Zinc, Chromium). The control filter was developed only with sand and gravel, excluding BC. Fourier Transform-Infrared Spectroscopy (FT-IR) and Scanning electron microscopy (SEM) were used to analyze BC’s chemical and physical characteristics. A brine shrimp lethality assay was carried out for toxicological evaluation. OH stretching (3,550-3,200 cm−1), C=C aromatic stretching (1400-1660 cm−1), and Phenol-O-H bending (1,300-1,400 cm−1) were recorded in all BC samples that involved the adsorption mechanism. Observed images indicated differences in surface morphology of both activated and nonactivated BC were observed under SEM observation. The study concludes that the filter unit incorporated with activated Eichhornia spp. Gave the best treatment efficiency when compared to filter units incorporated with other activated and nonactivated BC. The toxicity assay revealed 100% mortality in the control setup and raw wastewater but only 60–70% in the nonactivated BC integrated filters. Activated BC-incorporated filters showed no mortalities. Hence, the study’s outcomes suggest a green approach using invasive aquatic plants for sustainable wastewater treatment.

The study presented aims to find the most appropriate climate dataset for the data-scarce Jalaur River Basin (JRB), Iloilo, Philippines, by evaluating the statistical performance of five rainfall datasets (APHRODITE, CPC NOAA, ERA5, SA-OBS, and PGF-V3) with resolutions of 0.25° and 0.5° having a time domain of 1981 to 2005. Bilinear interpolation implemented through Climate Data Operator (CDO) was used to extract and process grid climate datasets with Linear scaling as bias correction to minimize product simulation uncertainties. The datasets were compared to the lone meteorological station nearest to JRB investigated at monthly and annual timescales using six statistical metrics, namely, Pearson’s correlation coefficient (r), coefficient of determination (R2), modified index of agreement (d1), Kling-Gupta efficiency, Nash-Sutcliffe efficiency (NSE), and RMSE-observations standard deviation ratio (RSR). The results indicate a strong positive correlation with the observed data for both rainfall and temperature (r > 0.8; R2, d1 > 0.80). Although graphical observation shows an underestimation of rainfall, goodness-of-fit values indicate very good model performance (NSE, KGE > 0.75; RSR < 0.50). In terms of temperature, variable responses are observed with significant overestimation for maximum temperature and underestimation for minimum temperature. SA-OBS proved to be the best-performing dataset, followed by ERA5 and PGF-V3. These key findings supply useful information in deciding the most appropriate gridded climate dataset for hydrometeorological investigation in the JRB and could enhance the regional representation of global datasets.

The present work studied the effects of alkali pretreatment on the cellulosic biomass of rice straw. The improvement in the cellulose content and reduction in the lignin and hemicellulose percentage was observed with alkali pretreatment. Fourier transformation infrared spectroscopy (FTIR) and Scanning electron microscopy (SEM) analysis confirm the modification in the surface structure of alkali rice straw. Further, the study investigated the potential of different types of seed sludge as inoculum sources for dark fermentative biohydrogen production. In comparison to other sludge samples (beverage industry, food industry, and sewage treatment plant sludge), the mixed culture of sewage treatment plant sludge had the highest cumulative volume of biohydrogen (90.52 mL), as well as the highest hydrogen production yield (0.75 moleH2/mole) with the substrate utilization of 86.72%. The results provide information on the best sludge source for enhancing biohydrogen production in the dark fermentation method.

Various wastes can be utilized to produce activated carbon, one of the wastes that can be utilized is nutmeg shell (Myristica fragrans). Activated carbon from nutmeg shells (Myristica fragrans) was used in this study to reduce the content of Pb(II) and Cu(II) ions in liquid waste. This research utilized the adsorption method with the batch system to determine the optimum contact time, optimum pH, and adsorption capacity. The characterization of activated carbon was done by Scanning Electron Microscopy (SEM) and Surface Area Analyzers (SAA). The content of Pb(II) and Cu(II) ions in the filtrate after adsorption was analyzed using an atomic absorption spectrophotometer (AAS). The results of SEM analysis showed that the carbon surface was cleaner and had more open pores after the activation process than before activation. The carbon surface area is 19.6243 m2.g-1. From the results of AAS analysis, the optimum time and pH for Pb(II) and Cu(II) ions was 40 min at pH 5 and 70 min at pH 4. With the Freundlich isotherm method, the adsorption capacity of the adsorbent for Pb(II) ions was 9.6028 mg.g-1 and Cu(II) ions was 0.035 mg.g-1, and the adsorption effectiveness on liquid waste for Pb and Cu metals was 1.9454 mg.g-1 and 0.4251 mg.g-1, respectively. The results showed that activated carbon from the nutmeg shell (Myristica fragrans) was able to reduce the levels of Pb(II) and Cu(II) ions in liquid waste.

Bisphenol A (BPA) is a widely utilized chemical found in numerous everyday products, including plastic containers, food packaging, and thermal paper. Research has linked BPA exposure to a range of health concerns, encompassing developmental and reproductive issues, cancer, and obesity. Given India's status as one of the world's largest producers and consumers of plastic goods, understanding the potential risks associated with BPA exposure and its health impacts on the Indian population is of paramount importance. This paper conducts a comparative analysis of BPA sources, environmental levels, migration, and health impacts in India in comparison to other countries. By examining data from various nations, we aim to discern overarching trends and patterns in BPA exposure and its associated health effects. This analysis serves as a foundation for the development of policies and regulations designed to safeguard public health. While the Indian government has taken some regulatory steps, such as banning the production, import, and sale of BPA-containing polycarbonate baby bottles, there is a notable absence of specific regulations or bans on BPA in other food-contact materials (FCMs). Studies conducted in India have detected BPA in various food items, underscoring the potential risk of BPA exposure through food consumption. This emphasizes the urgent need for effective monitoring and control of BPA migration in FCMs within India. In conclusion, this comparative review underscores the imperative for ongoing research and rigorous monitoring of BPA exposure and its health impacts in India, as well as in other nations. Safeguarding the health of the general public necessitates a comprehensive understanding of BPA's prevalence, sources, and consequences. By implementing and refining regulations, such as extending bans on BPA in additional FCMs, policymakers can work towards mitigating the risks associated with BPA exposure and ensuring the safety of populations worldwide.