Energy cooperation has been emphasized strongly in the Belt and Road (B&R) initiative. Therefore, the energy efficiency of China has attracted much attention from experts. However, relevant studies are still insufficient. This paper analyzes the total factor energy efficiency (TFEE) and its influencing factors of 17 B&R key regions from 2005 to 2015. We use the ratio of target energy input and actual energy input to calculate the regional TFEE under environmental constraints. The Malmquist index and the Tobit model are applied to investigate the internal and external influences of TFEE. Measurement analysis shows that the TFEE of the B&R key regions has not improved in recent years and it is unbalanced during the study period. Regions in the east area have the highest TFEE; regions in the west area have the second high TFEE; and regions in the north area have the lowest TFEE. Regression analysis shows that for the B&R key regions, technical changes, coal consumption, research and development, and environmental pollution have mainly negative effects on TFEE; pure efficiency changes, scale efficiency changes, economic structure, opening up, and government finance have mainly positive effects on TFEE. Finally, precise policy implications are proposed.

The study explores the relationship between ecological footprint, urbanization, and energy consumption by applying the ARDL estimation technique on data spanning 1965–2014 for South Africa. After applying the unit root test that accounts for a break in the data, the Bayer and Hanck (J Time Ser Anal 34:83–95, 2013) combined cointegration test affirms cointegrating relationship among the variables. Findings further reveal that economic growth and financial development exact a deteriorating impact on the environment in the short run. However, the same was not true for both energy use and urbanization. While urbanization and energy use promote environmental quality in the long run, financial development and economic growth degrade it further. The long-run findings of our study are confirmed to be robust as reported by the fully modified OLS (FMOLS), dynamic OLS (DOLS), and the canonical cointegrating regression (CCR) estimates. The direction of causality supports the energy-led growth hypothesis for South Africa. Policy outcomes and directions, and the possibility of promoting sustainable growth without degrading the environment are discussed.

A bibliometric analysis was performed to assess historical and recent research trends regarding e-waste studies from 1998 to 2018. Documents related to e-waste were identified from the Clarivate Analytics Web of Science© (WoS) database, and a total of 3311 academic articles was retrieved. The analysis was performed from four main aspects: (1) publication activity by year, by WoS category, and by geographic distribution; (2) journals; (3) most-cited papers; and (4) top 10 countries and author keyword analysis. The number of publications concerning e-waste issues has increased substantially over the last 20 years, especially in the environmental science category, and more than a third of the publications were produced in China (1181 records). Waste Management and Environmental Science & Technology were the most sought-after journals for disseminating the results. Studies related to “e-waste flow analysis,” “recycling,” “recovery of precious metals,” and “risk assessment of recycling areas” have been the most common for several years. The analysis of keywords suggested that there are many topics on electronic waste and that each country has presented a different focus of research. Overall, the bibliometric analysis proved to be an efficient tool with which to monitor historical and current research trends and to evaluate the sheer volume of currently existing scientific literature on e-waste topics.

The purpose of this study is to experimentally investigate the effect of unsaturation of the biodiesels obtained from grapeseed oil, wheat germ oil and coconut oil (reference fuel) for compression ignition (CI) engine application. Fatty acid profile analysis and physio-chemical properties were determined by standard test procedures. Engine testing was carried out in a 5.2-kW single-cylinder CI engine and the combustion, performance and emission characteristics were analysed. The effect of fuel property variation and the combustion reaction kinetics due to unsaturation difference have been discussed. The maximum brake thermal efficiency at full load for diesel was found to be 32.3% followed by 31.3%, 30.2% and 27.4 %, respectively, for coconut biodiesel (CBD), grapeseed biodiesel (GSBD) and wheat germ biodiesel (WGBD). Maximum heat release rate as observed for diesel, CBD, GSBD and WGBD are 63.2 J/°CA 60.7 J/°CA and 59 J/°CA and 43.4 J/°CA respectively. The brake-specific NO emission at full load is higher for CBD followed by GSBD, WGBD and diesel having values of 9.23 g/kWh, 8.91 g/kWh, 8.21 g/kWh and 7.6 g/kWh respectively. Conversely, the smoke emission is lower for CBD compared to the other tested fuels.

Commercial artificial sweeteners present in the market are usually made of combination of nutritive and artificial sweeteners such as sorbitol and aspartame. The aim of this research was to study the effect of in utero exposure to commercial artificial sweeteners on the mouse development and on mammary gland in different stages (18-day embryos and 4-week-old mice). Pregnant mice of treated groups were given 50 mg/kg body weight of commercial artificial sweetener. The dose was given on day 1 of pregnancy until 3-week nursing, while the controls were given distilled water. Congenital malformations were seen in treated 18-day fetus and 4-week-old mice, such as a significant decrease in the diameter of the placenta and the weight of the fetuses, while in 4-week-old mice, a significant decrease in the length of the body, limbs, and tail was seen compared to the controls. The result of this study showed that in 18-day fetuses, clusters of mammary gland in the treated mice seemed to be more differentiated than the controls. In 4-week-old mice, the number of mammary gland ducts in the treated group was significantly more than the control group, and the lumen of the ducts in the treated sections seemed to be narrower than the controls, also many regressing terminal end buds (TEBs) were seen in the treated group. A significant increase in the mammary gland area of treated group was seen compared to the controls.

The increasing trend of nanoparticle usage in science and technology has led to significant human exposure. Occupational exposure to iron oxides and silica dust has been reported in mining, manufacturing, construction, and pharmaceutical operations. The combined toxicological effects of nanoparticles and simultaneous exposure to other compounds have given rise to a new concern. Hence, the objective of this study was to investigate the toxicological effects of magnetite and polymorphous silicon dioxide nanoparticles in single and combined exposures. The polymorphous silicon dioxide nanoparticles were obtained from the milled quartz particles under 100 nm in diameter. The milled particles were purified through chloric and nitric acid wash processes. The toxic effects of the magnetite nanoparticles were investigated independently and in combination with quartz using the A₅₄₉ cell line for durations of 24 and 72 h, and using diverse concentrations of 10, 50, 100, and 250 μg/mL. MTT, ROS, mitochondrial membrane potential, and cell glutathione content assays were used to evaluate the amount of cell damage in this study. The statistical significance level in one-way ANOVA and independent t test was considered to be at the 5% confidence level. The size and purity of polymorphous silicon dioxide nanoparticles were measured by TEM and ICP-OES analysis, respectively. The particles’ diameters were under 100 nm and demonstrated a purity of higher than 99%. The toxicity results of this study showed a dependency on concentration and exposure duration in reducing the cell viability, cellular glutathione content, and mitochondrial membrane potential, as well as increasing the ROS generation in single and combined exposures with magnetite and polymorphous silicon dioxide nanoparticles. The toxic effects of combined exposure to these nanoparticles were less than the single exposures, and statistically significant antagonistic interactions were detected. Combined exposure to polymorphous silicon dioxide and magnetite nanoparticles, in comparison with their single exposures, could affect health in an antagonistic manner. Since this study has been the first of its kind, further studies investigating the health effects of single and combined exposures to these compounds are needed to verify our findings. Generally, studies such as this one could contribute to the field of combined toxicity effects.

Previous studies have shown that plant diversity can enhance methane (CH₄) emission and nitrogen purification efficiency in constructed wetlands (CWs), but effect of plant diversity on carbon dioxide (CO₂) flux and carbon removal efficiency in CWs is unknown. Therefore, we established four plant diversity levels (each level containing 4, 3, 2, and 1 species, respectively) in laboratory-scale wetland microcosms fed with simulated wastewater. Results showed that plant species richness enhanced CO₂ emissions (84.7–124.7 mg CO₂ m⁻² h⁻¹, P < 0.01), carbon fixation rate (P < 0.05), and microbial biomass carbon (P < 0.001), but did not improve carbon removal (P > 0.05). The presence of Pontederia cordata increased CO₂ emissions, carbon fixation rate of belowground, and microbial biomass carbon (P < 0.05), whereas the presence of Phragmites australis only enhanced CO₂ emission (P < 0.05). However, the presence of Typha orientalis or Lythrum salicaria did not show an influence on CO₂ emissions and carbon removal (P > 0.05). Hence, our study highlights the importance of plant diversity in mediating CO₂ emission intensity and carbon processes but not carbon removal in CWs.

Heterogeneous photocatalytic oxidation (PCO) is a widely studied alternative for the elimination of volatile organic compounds (VOC) in air. In this context, research on novel photoreactor arrangements to enhance PCO rates is desired. Annular fluidized bed photoreactors (AFBPR) have yielded prominent results when compared to conventional thin film reactors. However, very few works aimed at optimizing AFBPR operation. In this study, TiO₂ photocalytic agglomerates were synthesized and segregated in specific size distributions to behave as Geldart groups A, B, C, and D fluidization. The TiO₂ agglomerates were characterized by XRD, FTIR spectra, and N₂ adsorption. Photocatalyst performances were compared in a 10-mm gapped AFBPR for degrading the model pollutant methyl-ethyl-ketone (MEK), using a 254-nm radiation source. Geldart group C showed to be inadequate for AFBPR operation due to the short operation range between fluidization and elutriation. In all the cases, photocatalytic reaction rates were superior to sole UV photolysis. Group A and group B demonstrated the highest reaction rates. Considerations based on mass transfer suggested that the reasons were enhanced UV distribution within the bed at lower flow rates and superior catalyst surface area at higher flow rates. Results also revealed that groups A, B, and D perform equally per catalyst area within an AFBPR if the fluidization numbers (FN) are high enough.

Chromium (Cr(VI)) causes serious impacts on the environment and human. In this study, the commercial activated carbon-loaded silver nanoparticle (AgNPs-AC) was used as a new adsorbent to remove Cr(VI) from the aqueous solution. Batch adsorption experiments were conducted to evaluate the effects of pH, the initial concentration of Cr(VI), contact time, and dose of AgNPs-AC upon removal of Cr(VI) from the aqueous solution. The results showed that at pH of 4, the contact time of 150 min, 40 mg/L of initial Cr(VI), and dosage of 20 mg AgNPs-AC/25 mL were the most suitable condition for absorption of Cr(VI) onto AgNPs-AC from the aqueous solution. The maximum adsorption capacity achieved at abovementioned conditions was 27.70 mg/g. Meanwhile, the adsorption capacity of commercial activated carbon from a coconut shell obtained only 7.61 mg/g in the case where the initial Cr(VI) concentration is 10 mg/L and the contact time is 60 min. The adsorption kinetic data were found to fit best to the pseudo-second-order model with a high correlation coefficient (R² = 0.9597). The adsorption process was controlled by chemisorption due to the appearance of new chemical species on the adsorbent surface. The positively charged functional groups rapidly reduced Cr(VI) to Cr(III), and Cr(III) was subsequently adsorbed by the carboxyl group on the adsorbent’s surface. From this study, it can be concluded that AgNPs-AC is a fully promising, low-cost adsorbent in the removal of Cr(VI) from the aqueous solution.