The evaluation of formaldehyde (FD) exposure in beauty salons, due to the use of hair straightening products, and its relation with genotoxicity biomarkers was performed in this study. Regardless of official recommendations, the inappropriate use of homemade hair creams has became a popular practice in Brazil, and high formaldehyde content in the “progressive straightening” creams can contain mutagens that could increase the incidence of neoplasia in those people who use them. Damage to DNA was assessed by conducting a micronuclei test (MNT) on buccal cells and the comet assay on heparinized venous blood samples. A total of 50 volunteers were recruited at six different beauty salons (labeled A to F). At two salons that used products that did not contain FD (salons D and E), environmental FD concentrations were 0.04 and 0.02 ppm. In contrast, the products used at salons A, B, C, and F contained 5.7, 2.61, 5.9, and 5.79 % of FD, and these salons had environmental FD concentrations of 0.07, 0.14, 0.16, and 0.14 ppm, respectively. Comparison of the beauty salon workers from each of the six beauty salons revealed significant differences in urinary formic acid (FA) concentration before exposure (p = 0.016), urinary FA after exposure (p = 0.004), variation in FA concentration before and after exposure (p = 0.018), environmental FD concentration (p < 0.001), cytogenetic damage detected by the comet assay according to both damage index (p < 0.001) and frequency of damage (p < 0.001), and for karyorrhexis only according to the MNT (p = 0.001).

Batch adsorption experiments were performed for the removal of chromium (III) and chromium (VI) ions from aqueous solutions using Canadian peat and coconut fiber. The Langmuir model was used to describe the adsorption isotherm. The maximum adsorption for peat reached 18.75 mg/g for Cr(III) and 8.02 mg/g for Cr(VI), whereas the value for fiber was slightly higher and reached 19.21 mg/g for Cr(III) and 9.54 mg/g for Cr(VI). Both chromium forms could be easily eluted from the materials. The adsorption of chromium forms to organic matter could be explained in terms of formation of donor-acceptor chemical covalent bound with hydroxyl groups as ligands and chromium as the central atom in the formed complex. The chromate-reducing activities were monitored with the use of electron paramagnetic resonance spectroscopy. The results showed that both adsorption and reduction occurred simultaneously and the maximum adsorption capacity of hexavalent chromium being equal to 95 % for fiber and 92 % for peat was obtained at pH 1.5. The reduction of Cr(VI) in wastewaters began immediately and disappeared after 20 h. Both materials contained yeast and fungi species which can be responsible for reduction of chromium compounds, due to their enzymatic activity (Chwastowski and Koloczek (Acta Biochim Pol 60: 829–834, 2013)). The reduction of Cr(VI) is a two-phase process, the first phase being rapid and based on chemical reaction and the second phase having biological features. After the recovery step, both types of organic materials can be used again for chromium adsorption without any loss in the metal uptake. Both of the materials could be used as biofilters in the wastewater treatment plants.

Different alkaline residue materials (fly ash, green liquor dregs, and lime mud) generated from the pulp and paper industry as sealing materials were evaluated to cover aged mine waste tailings (<1 % sulfur content, primarily pyrite). The mobility of four selected trace elements (Cr, Cu, Zn, and As) was compared based on batch and column leaching studies to assess the effectiveness of these alkaline materials as sealing agents. Based on the leaching results, Cr, Cu, and Zn were immobilized by the alkaline amendments. In the amended tailings in the batch system only As dramatically exceeded the limit values at L/S 10 L/kg. The leaching results showed similar patterns to the batch results, though leached Cr, Cu, and Zn showed higher levels in the column tests than in the batch tests. However, when the columns were compared with the batches, the trend for Cu was opposite for the unamended tailings. By contrast, both batch and column results showed that the amendment caused mobilization of As compared with the unamended tailings in the ash-amended tailings. The amount of As released was greatest in the ash column and decreased from the dregs to the lime columns. The leaching of As at high levels can be a potential problem whenever alkaline materials (especially for fly ash) are used as sealing materials over tailings. The column test was considered by the authors to be a more informative method in remediation of the aged tailings with low sulfur content, since it mimics better actual situation in a field.

Acetamiprid is one of the most widely used neonicotinoids. This study investigates toxic effects of repeated oral administration of three doses of acetamiprid (1/20, 1/10, and 1/5 of LD₅₀) during 60 days. For this, male Wistar rats were divided into four different groups. Hematological, biochemical, and toxicopathic effects of acetamiprid were evaluated. According to the results, a significant decrease in the body weight gain at the highest dose 1/5 of LD₅₀ of acetamiprid was noticed. An increase in the relative liver weight was also observed at this dose level. The hematological constituents were affected. A significant decrease in RBC, HGB, and HCT in rats treated with higher doses of acetamiprid (1/10 and 1/5 of LD₅₀) was noted. However, a significant increase in WBC and PLT were observed at the same doses. Furthermore, acetamiprid induced liver toxicity measured by the increased activities of aspartate aminotransferase (AST), alanine aminotransferase (ALT), alkaline phosphates (ALPs), and lactate dehydrogenase (LDH) which may be due to the loss of hepatic membrane architecture and hepatocellular damage. In addition, exposure to acetamiprid resulted in a significant decrease in the levels of superoxide dismutase and catalase activities (p ≤ 0.01) with concomitant increase in lipid peroxidation in rat liver. These findings highlight the subchronic hepatotoxicity of acetamiprid.

This study focuses on the extent of zinc (Zn), copper (Cu), cadmium (Cd), cobalt (Co), manganese (Mn), lead (Pb), mercury (Hg), and arsenic (As) bioaccumulation in edible muscles of Caspian kutum (Rutilus frisii kutum), in both male and female sexes at Noor and Babolsar coastal regions from the southern basin of Caspian Sea. These values were compared with the WHO and the UNFAO safety standards regarding the amount of the abovementioned heavy metals in fish tissues (mg/kg ww). Results showed that the accumulation of these elements (except for Zn) was not significantly different between sexes of male and female in Babolsar coastal regions (P > 0.05). In the other hand, accumulation of Hg and As at edible muscles of Caspian kutum has significant difference between two sexes of male and female in Noor coastal regions (P < 0.05), the female had higher concentration than the male. Furthermore, it was not significantly correlated with sex and rivers in length and weight of fish (R ² < 0.50; P > 0.05). Based on the results, the concentration of heavy metals in the studied fish tissues proved to be significantly lower than international standards (P < 0.05), so its consumption is not a threat to the health of consumers.

This paper reports the results of the study of the efficiency of accumulation and distribution of mercury (Hg) in the fruiting bodies of fungus Suillus bovinus and the probable dietary intake of Hg and the potential health risk. Fungal fruiting bodies and soil materials were collected from 13 background areas in the northern part of Poland between 1993 and 2013. Mercury in the caps of fruiting bodies varied from 0.10 ± 0.06 to 0.79 ± 0.40 mg kg⁻¹ dry biomass and in the stipes from 0.083 ± 0.028 to 0.51 ± 0.22 mg kg⁻¹ dry biomass. The mean values of cap to stipe Hg content quotient varied from 1.3 ± 0.2 to 2.6 ± 0.6. The Hg content in the upper 0–10 cm layer of soil substrate varied from 0.015 ± 0.004 to 0.031 ± 0.019 mg kg⁻¹ dry biomass. S. bovinus could be considered as an efficient accumulator of Hg, at least from low level polluted soils, and the values of Hg bioconcentration factor (BCF) varied from 6.4 ± 2.2 to 45 ± 20 for caps and from 3.8 ± 1.4 to 29 ± 11 for stipes. A conventional meal (300 g) portion of S. bovinus foraged from background areas provides Hg dose far below the provisionally tolerable weekly intake or recommended reference dose set for this element by authorities. An examination of published data on Hg in fruiting bodies of fungi genus Suillus showed low contamination of specimens foraged from background areas. Also reviewed are published data on Hg in fungi genus Suillus collected worldwide.

In this study, a bacterial strain able to use sulcotrione, a β-triketone herbicide, as sole source of carbon and energy was isolated from soil samples previously treated with this herbicide. Phylogenetic study based on16S rRNA gene sequence showed that the isolate has 100 % of similarity with several Bradyrhizobium and was accordingly designated as Bradyrhizobium sp. SR1. Plasmid profiling revealed the presence of a large plasmid (>50 kb) in SR1 not cured under nonselective conditions. Its transfer to Escherichia coli by electroporation failed to induce β-triketone degrading capacity, suggesting that degrading genes possibly located on this plasmid cannot be expressed in E. coli or that they are not plasmid borne. The evaluation of the SR1 ability to degrade various synthetic (mesotrione and tembotrione) and natural (leptospermone) triketones showed that this strain was also able to degrade mesotrione. Although SR1 was able to entirely dissipate both herbicides, degradation rate of sulcotrione was ten times higher than that of mesotrione, showing a greater affinity of degrading-enzyme system to sulcotrione. Degradation pathway of sulcotrione involved the formation of 2-chloro-4-mesylbenzoic acid (CMBA), previously identified in sulcotrione degradation, and of a new metabolite identified as hydroxy-sulcotrione. Mesotrione degradation pathway leads to the accumulation of 4-methylsulfonyl-2-nitrobenzoic acid (MNBA) and 2-amino-4 methylsulfonylbenzoic acid (AMBA), two well-known metabolites of this herbicide. Along with the dissipation of β-triketones, one could observe the decrease in 4-hydroxyphenylpyruvate dioxygenase (HPPD) inhibition, indicating that toxicity was due to parent molecules, and not to the formed metabolites. This is the first report of the isolation of bacterial strain able to transform two β-triketones.

A significant proportion of xenobiotic recalcitrant azo dyes are being released in environment during carpet dyeing. The bacterial strain Stenotrophomonas sp. BHUSSp X2 was isolated from dye contaminated soil of carpet industry, Bhadohi, India. The isolated bacterial strain was identified morphologically, biochemically, and on the basis of 16S rRNA gene sequence. The isolate decolorized 97 % of C.I. Acid Red 1 (Acid RED G) at the concentration of 200 mg/l within 6 h under optimum static conditions (temperature −35 °C, pH 8, and initial cell concentration 7 × 10⁷ cell/ml). Drastic reduction in dye degradation rate was observed beyond initial dye concentration from 500 mg/l (90 %), and it reaches to 25 % at 1000 mg/l under same set of conditions. The analysis related to decolorization and degradation was done using UV-Vis spectrophotometer, HPLC, and FTIR, whereas the GC-MS technique was utilized for the identification of degradation products. Phytotoxicity analysis revealed that degradation products are less toxic as compared to the original dye.

An analytical method associating accelerated solvent extraction (ASE) and solid-phase micro-extraction (SPME) in immersion mode combined with gas chromatography dual electrons capture detectors (SPME-GC-2ECD) has been developed and studied for the simultaneous determination of 19 organochlorine pesticides (OCPs) and 22 polychlorinated biphenyls (PCBs) in air samples (active and XAD-2 passive samplers). Samples were extracted with ASE with acetonitrile using the following conditions: temperature, 150 °C; pressure, 1500 psi; static, 15 min; cycles, 3; purge, 300 s; flush, 100 %. Extracts were reduced to 1 mL, and 500 μL of this extract, filled with deionised water, was subject to SPME extraction. Experimental results indicated that the proposed method attained the best extraction efficiency under the optimised conditions: extraction of PCB-OCP mixture using 100-μm PDMS fibre at 80 °C for 40 min with no addition of salt. The performance of the proposed ASE-SPME-GC-2ECD methodology with respect to linearity, limit of quantification and detection was evaluated by spiking of XAD-2 resin with target compounds. The regression coefficient (R ²) of most compounds was found to be high of 0.99. limits of detection (LODs) are between 0.02 and 4.90 ng m⁻³, and limits of quantification (LOQs) are between 0.05 and 9.12 ng m⁻³ and between 0.2 and 49 ng/sampler and 0.52 and 91 ng/sampler, respectively, for XAD-2 passive samplers. Finally, a developed procedure was applied to determine selected PCBs and OCPs in the atmosphere.

Cyanobacterial blooms-produced microcystins are secondary metabolites which can accumulate in the food chain and contaminate water, thus posing a potential threat to the health of aquatic animals and even humans. Microcystin toxicity affects not only the liver but also the other organs, i.e., the brain. The serious neurotoxicity effects caused by microcystins then lead to various symptoms. This review focuses on the neurotoxicity of microcystins. Microcystins can cross blood-brain barrier with the transport of Oatps/OATPs, causing neurostructural, functional, and behavioral changes. In this review, potential uptake mechanisms and neurotoxicity mechanisms are summarized, including neurotransmissions, neurochannels, signal transduction, oxidative stress, and cytoskeleton disruption. However, further researches are needed for detailed studies on signaling pathways and the downstream pathways of neurotoxicity of microcystins.