Nitrate contamination in aquifers has posed human health under high risk because people still rely on groundwater withdrawn from aquifers as drinking water and running water sources. These days, bioelectrochemical technologies have shown a great number of benefits for nitrate remediation via autotrophic denitrification in groundwater. This study tested the working possibility of a denitrifying biocathode when installed into a simulated aquifer. The reactors were filled with sand and synthetic groundwater at various ratios (10, 50, and 100 %) to clarify the effect of various biocathode states (not-buried, half-buried, and fully buried) on nitrate reduction rate and microbial communities. Decreases in specific nitrate reduction rates were found to be correlated with increases in sand/medium ratios. A specific nitrate reduction rate of 322.6 mg m⁻² day⁻¹ was obtained when the biocathode was fully buried in an aquifer. Microbial community analysis revealed slight differences in the microbial communities of biocathodes at various sand/medium ratios. Various coccus- and rod-shaped bacteria were found to contribute to bioelectrochemical denitrification including Thiobacillus spp. and Paracoccus spp. This study demonstrated that the denitrifying biocathode could work effectively in a saturated aquifer and confirmed the feasibility of in situ application of microbial electrochemical denitrification technology.

Pb/Zn smelting, an important economic activity in China, has led to heavy environmental pollution. This research reviewed studies on soil Pb contamination at Pb/Zn smelting sites in China published during the period of 2000 to 2015 to clarify the total levels, spatial changes, and health risks for Pb contamination in soils at local and national scales. The results show that Pb contents in surface soils at 58 Pb/Zn smelting sites in China ranged from 7 to 312,452 mg kg⁻¹ with an arithmetic average, geometric average, and median of 1982, 404, and 428 mg kg⁻¹, respectively (n = 1011). Surface soil Pb content at these smelting sites decreased from an average of 2466 to 659 mg kg⁻¹, then to 463 mg kg⁻¹ as the distance from the smelters increased from <1000 to 1000∼2000 m, and then to >2000 m. With respect to variation with depth, the average soil Pb content at these sites gradually decreased from 986 mg kg⁻¹ at 0- to 20-cm depth to 144 mg kg⁻¹ at 80- to 100-cm depth. Approximately 78 % of the soil samples (n = 1011) at the 58 Pb/Zn smelting sites were classified as having high Pb pollution levels. Approximately 34.2 and 7.7 % of the soil samples (n = 1011) at the 58 Pb/Zn smelting sites might pose adverse health effects and high chronic risks to children, respectively. The Pb/Zn smelting sites in the southwest and southeast provinces of China, as well as Liaoning province, were most contaminated and thus should receive priority for remediation.

Due to high durability, cheap cost, and ease of manufacture, 311 million tons of plastic-based products are manufactured around the globe per annum. The slow/least rate of plastic degradation leads to generation of million tons of plastic waste per annum, which is of great environmental concern. Of the total plastic waste generated, polythene shared about 64 %. Various methods are available in the literature to tackle with the plastic waste, and biodegradation is considered as the most accepted, eco-friendly, and cost-effective method of polythene waste disposal. In the present study, an attempt has been made to isolate, screen, and characterize the most efficient polythene degrading bacteria by using rhizosphere soil of Avicennia marina as a landmark. From 12 localities along the west coast of India, a total of 123 bacterial isolates were recorded. Maximum percent weight loss (% WL; 21.87 ± 6.37 %) was recorded with VASB14 at pH 3.5 after 2 months of shaking at room temperature. Maximum percent weight gain (13.87 ± 3.6 %) was reported with MANGB5 at pH 7. Maximum percent loss in tensile strength (% loss in TS; 87.50 ± 4.8 %) was documented with VASB1 at pH 9.5. The results based on the % loss in TS were only reproducible. Further, the level of degradation was confirmed by scanning electron microscopic (SEM) and Fourier transform infrared spectroscopy (FTIR) analysis. In SEM analysis, scions/crakes were found on the surface of the degraded polythene, and mass of bacterial cell was also recorded on the weight-gained polythene strips. Maximum reduction in carbonyl index (4.14 %) was recorded in untreated polythene strip with Lysinibacillus fusiformis strain VASB14/WL. Based on 16S ribosomal RNA (rRNA) gene sequence homology, the most efficient polythene degrading bacteria were identified as L. fusiformis strainVASB14/WL and Bacillus cereus strain VASB1/TS.

Interior air environment and health problems of vehicles have attracted increasing attention, and benzene homologues (BHs) including benzene, toluene, ethylbenzene, xylenes, and styrene are primary hazardous gases in vehicular cabins. The BHs impact on the health of passengers and drivers in 38 taxis is assessed, and health risk equations of in-car BHs to different drivers and passengers are induced. The health risk of in-car BHs for male drivers is the highest among all different receptors and is 1.04, 6.67, and 6.94 times more than ones for female drivers, male passengers, and female passengers, respectively. In-car BHs could not lead to the non-cancer health risk to all passengers and drivers as for the maximal value of non-cancer indices is 0.41 and is less than the unacceptable value (1.00) of non-cancer health risk from USEPA. However, in-car BHs lead to cancer health risk to drivers as for the average value of cancer indices is 1.21E-04 which is 1.21 times more than the unacceptable value (1.00E-04) of cancer health risk from USEPA. Finally, for in-car airborne benzene concentration (X, μg/m³) to male drivers, female drivers, male passengers, and female passengers, the cancer health risk equations are Y = 1.48E-06X, Y = 1.42E-06X, Y = 2.22E-07X, and Y = 2.13E-07X, respectively, and the non-cancer health risk equations are Y = 1.70E-03X, Y = 1.63E-03X, Y = 2.55E-04X, and Y = 2.45E-04X, respectively.

Heavy oil-produced water (HOPW) is a by-product during heavy oil exploitation and can cause serious environmental pollution if discharged without adequate treatment. Commercial biochemical treatment units are important parts of HOPW treatment processes, but many are not in stable operation because of the toxic and refractory substances, salt, present. Therefore, pilot-scale experiments were conducted to evaluate the performance of hydrolytic acidification-biological filter with airlift aeration (HA-BFAA), a novel HOPW treatment system. Four strains isolated from oily sludge were used for bioaugmentation to enhance the biodegradation of organic pollutants. The isolated bacteria were evaluated using 3-day biochemical oxygen demand, oil, dodecyl benzene sulfonic acid, and chemical oxygen demand (COD) removals as evaluation indices. Bioaugmentation enhanced the COD removal by 43.5 mg/L under a volume load of 0.249 kg COD/m³ day and hydraulic retention time of 33.6 h. The effluent COD was 70.9 mg/L and the corresponding COD removal was 75.0 %. The optimum volumetric air-to-water ratio was below 10. The removal ratios of the total extractable organic pollutants, alkanes, and poly-aromatic hydrocarbons were 71.1, 94.4, and 94.0 %, respectively. Results demonstrated that HA-BFAA was an excellent HOPW treatment system.

This study aimed to identify the most commonly used agricultural pesticides around Ichkeul Lake–Bizerta Lagoon watershed. First survey of pesticide use on agricultural watershed was performed with farmers, Regional Commissioner for Agricultural Development, and pesticide dealers. Then, sediment contamination by pesticides and response of benthic communities (bacteria and free-living marine nematode) were investigated. The analysis of 22 active organochlorine pesticides in sediments was performed according to quick, easy, cheap, effective, rugged, and safe (QuEChERS) method, biodiversity of indigenous bacterial community sediment was determined by terminal restriction fragment length polymorphism (T-RFLP), and free-living marine nematodes were counted. The results of the field survey showed that iodosulfuron, mesosulfuron, 2,4-dichlorophenoxyacetic acid (2,4 D), glyphosate, and fenoxaprops were the most used herbicides, tebuconazole and epoxiconazole the most used fungicides, and deltamethrin the most used insecticide. Sixteen organochlorine pesticide compounds among the 22 examined were detected in sediments up to 2 ppm in Ichkeul Lake, endrin, dieldrin, and hexachlorocyclohexane being the most detected molecules. The most pesticide-contaminated site in the lake presented the higher density of nematode, but when considering all sites, no clear correlation with organochlorine pesticide (OCP) content could be established. The bacterial community structure in the most contaminated site in the lake was characterized by the terminal restriction fragments (T-RFs) 97, 146, 258, 285, and 335 while the most contaminated site in the lagoon was characterized by the T-RFs 54, 263, 315, 403, and 428. Interestingly, T-RFs 38 and 143 were found in the most contaminated sites of both lake and lagoon ecosystems, indicating that they were resistant to OCPs and able to cope with environmental fluctuation of salinity. In contrast, the T-RFs 63, 100, 118, and 381 in the lake and the T-RFs 40, 60, 80, 158, 300, 321, and 357 in the lagoon were sensitive to OCPs. This study highlighted that the intensive use of pesticides in agriculture, through transfer to aquatic ecosystem, may disturb the benthic ecosystem functioning of the protected area. The free-living marine nematodes and bacterial communities represent useful proxy to follow the ecosystem health and its capacity of resilience.

The catalysts such as Fe, Bi₂O₃, and Fe-doped Bi₂O₃ were synthesized for the sonophotocatalytic treatment of synthetic dye and real textile wastewater. The resultant catalysts were characterized for its size and uniform shape using x-ray diffractogram (XRD) and scanning electron microscopy (SEM) which signified the nanorod shape formed Bi₂O₃. The higher ultraviolet light absorbance capacity of the catalysts was also evident using diffuse reflectance spectroscopy (DRS). Initially, the effect of conventional parameters such as initial pH, gas bubbling (argon, oxygen, air and nitrogen) and oxidant addition (H₂O₂ and peroxymonosulfate) in the presence of sonolysis (22 and 37 kHz frequency) and photolysis (UV-C light) on 10 ppm Basic Brown 1 dye was studied. The results showed that highest decolorization of 62 % was attained for 3 g/L peroxymonosulfate under 37 kHz frequency sonolysis treatment. Secondly, with the catalyst study, highest of 46 % dye color removal was obtained with 4 g/L Fe under 37 kHz frequency sonolysis treatment. The sonophotocatalytic treatment of dye with Fe-doped Bi₂O₃ catalyst in combination with peroxymonosulfate showed highest color removal of 99 %. Finally, the sonophotocatalytic treatment of real textile wastewater in the presence of 3 g/L Fe-doped Bi₂O₃ and 6 g/L peroxymonosulfate reduced the total organic carbon (TOC) and chemical oxygen demand (COD) level to 77 and 91 %, respectively, in 180 min. The reported treatment process was found to treat the synthetic dye and real textile wastewater effectively.

Chlordecone is a persistent organochlorine pesticide widely used in Guadeloupe (French West Indies) to control the banana weevil Cosmopolites sordidus. Although it was previously highlighted that chlordecone may affect the reproduction and growth of vertebrate species, little information is available on the chlordecone effects in invertebrates. The present study investigated the effects of chlordecone on a hormone and a protein having key roles in reproduction and growth of the decapod crustacean Macrobrachium rosenbergii, by measuring the 20-hydroxyecdysone concentration, vitellogenin, and vitellogenin receptor gene expression, as well as the bioconcentration of chlordecone in exposed prawns. First, the results revealed that chlordecone was accumulated in M. rosenbergii. Then, it was found that Vg and VgR gene expression were increased in male and female M. rosenbergii exposed to chlordecone for 90 and 240 days, while the 20-hydroxyecdysone concentrations were decreased. This work suggests that chlordecone accumulates in prawn tissues and could affect key molecules involved in the reproduction and the growth of the invertebrate M. rosenbergii. However, many questions remain unresolved regarding the impacts of chlordecone on growth and reproduction and the signaling pathways responsible for these effects, as well as the potential role of confounding factors present in in situ studies.

Total concentrations of heavy metals in soils may not be enough to understand their mobility and bioavailability. It is important to evaluate the degree of association of heavy metals with different chemical forms of soil. The sequential extraction method was applied to evaluate the mobile behavior of Cd, Cr, Cu, Ni, Pb, and Zn in 42 representative soil samples from the Linhuan subsidence of Huaibei Coalfield, Anhui Province, China. The results showed that mean concentrations of heavy metals were higher than background values of Huaibei City surface soil by a factor of 1.16 to 3.21 (Cd, 3.21; Cr, 1.19; Cu, 1.16; Ni, 1.23; Zn, 1.85) except Pb (0.89). Most of the total Cr, Cu, Ni, Pb, and Zn were present in the residual forms (above 70 %), while Cd was dominated by the exchangeable forms (42 %). The correlations analysis showed that the mobility of Cd, Cu, Pb, and Zn in soil was affected by both physicochemical properties and total metal concentrations. In contrast, the moblity of Cr and Ni of soil was mainly affected by their total metal concentrations. According to assessments by the potential ecological risk index (RI) and the risk assessment code (RAC), Cr, Cu, Ni, Pb, and Zn posed no or low risk. However, Cd presents high to very high risk, due to its higher exchangeable and carbonate-bound fractions.

The Chaco Pampean Plain of central Argentina represents one of the largest regions with high levels of arsenic (As) in groundwater. The aim of this study was the assessment of a biotransference factor (BTF) as a tool for the estimation of As concentration in cow’s milk from As drinking water concentration. Total As content in livestock drinking water, soil, forage, and milk was determined in farms located in an area of high As groundwater, in order to analyze the relation between As uptake and its transfer to milk. The concentrations of As in milk ranged from 0.5 to 8.0 μg/L. From the results obtained, drinking water may be considered the main source of exposure to As, and the biotransference factor for milk ranges from 1.5 × 10⁻⁵ to 4.3 × 10⁻⁴. Therefore, BTF provides a simple tool for the estimation of arsenic levels in milk through the As livestock drinking water content.