At the mouth of the Odiel River, within the Natural Area “Marismas del Odiel”, there has been for years a collection of waste from different mining sites. In the present work, an approach has been made to the problem that this supposes, quantifying the pollutants that are poured into the estuary from the mineral collection located on the banks of the river. The study carried out has been able to determine high metal concentrations, comparable with any rubble from the upstream mines, with pH value of 1.66, lower than many other areas affected by acid mine drainage in the same river, and even with concentrations of Fe and As higher than those provided by the rest of the mining facilities of the Odiel basin. This can make us understand the serious situation of the Natural Park, where a great variety of birds and plants of special ecological interest are located.

The emission of nitrogen oxides has caused severe harm to the ecosystem; thus, the development of low-cost and high-efficiency denitrification catalysts and new methods are of great significance. In this work, a co-precipitation method was employed to prepare Pr-doped CeO₂/attapulgite (CeO₂/Pr³⁺/ATP) nanocomposites. X-ray diffraction (XRD), photoluminance spectroscopy (PL), ultraviolet-visible diffuse reflectance (UV-Vis), Fourier transform infrared (FT-IR), and high-resolution transmission electron microscopy (HRTEM) were utilized to characterize the products. Results showed that the CeO₂/Pr³⁺ nanoparticles were uniformly coated on the surface of ATP and demonstrated outstanding upconversion effect which converted the visible light to ultraviolet light. The upconversion luminescence of CeO₂/Pr³⁺/ATP was strongest when the molar doping amount of Pr was 1 mol%, and the photo-SCR denitrification achieved the highest of 90% conversion and 95% selectivity when the loading amount of CeO₂/Pr³⁺ was 40 wt%. The ATP and CeO₂/Pr³⁺ constructed an indirect Z-type heterojunction structure mediated by oxygen vacancy which benefited the separation of charge carriers and enhanced the reduction-oxidation potentials, both are responsible for the remarkable denitrification performance.

Advanced oxidation processes (AOPs) using various energy sources and oxidants to produce reactive oxygen species are widely used for the destruction of recalcitrant water contaminants. The current study is about the degradation of two emerging pollutants—salicylic acid (SA) and methyl paraben (MP)—by high-frequency ultrasonication followed by identification of the oxidation byproducts and modeling of the reaction mechanisms using the density functional theory (DFT). The study also encompasses prediction of the aquatic toxicity and potential risk of the identified byproducts to some aquatic organisms bussing the ECOSAR (Ecological Structure Activity Relationships) protocol. It was found that the degradation of both compounds was governed by •OH attack and the pathways consisted of a cascade of reactions. The rate determining steps were decarboxylation (~ 60 kcal mol⁻¹) and bond breakage reactions (~ 80 kcal mol⁻¹), which were triggered by the stability of the reaction byproducts and overcome by the applied reaction conditions. Estimated values of the acute toxicities showed that only few of the byproducts were harmful to aquatic organisms, implying the environmental friendliness of the experimental method.

Chromium (Cr) is one of the most common metal pollutants and has thus attracted considerable attention. In this study, we investigated the potential use of biogas solid residue (BSR) from anaerobic digestion as an effective amendment to decrease the bioavailability of Cr in Cr(VI)-polluted soil using pot experiments. Compared to the no-addition treatment, the addition of BSR (treatments—50, 100, and 150 g kg⁻¹ soil) increased the soil nutrient levels, microbial diversity and activities, and decreased the redox potential (Eh). BSR treatment of Cr(VI)-contaminated soil caused a reduction in soil Cr(VI) concentration (16.6–52.1%) and the exchangeable Cr proportion (15.2–52.4%), thereby decreasing the available Cr for uptake by plants. BSR treatments resulted in a reduction in the Cr contents of the roots and aboveground biomass of pakchoi plants. The Cr(VI) content in treated soils decreased with increasing BSR addition, with 150 g kg⁻¹ being the most efficient application. The relative abundance of Cr-reducing groups, such as Pseudomonas, Microbacterium, and Bacillus, increased with the increase in BSR application. The enhancement of soil Cr(VI) immobilization by the addition of the BSR was mostly attributed to the simultaneous effect of organic matter addition, stimulation of microorganisms, and reduced Eh value. Organic matter contributed more to the variation in Cr. The presence of BSR decreased the bioavailability of Cr in the soil and, therefore, lowered the potential mobilization of Cr(VI) from the soils. Our results demonstrated that BSR application may offer a potentially promising solution for enhancing agricultural production in Cr-contaminated soils.

Mining activity constitutes a potential source of heavy metal pollution in the environment. Long-term exposure to heavy metals (e.g., cadmium) has adverse health effects. Rodents frequently serve as bioindicators to monitor the levels of heavy metals in the environment. In the present study, concentrations of 10 heavy metals (Cd, Co, Cr, Cu, Fe, Mo, Ni, Pb, Sb, and Zn) in kidney, liver, and muscle tissue of the Persian jird (Meriones persicus) were evaluated. This is the first study to examine the histopathological changes in Persian jird tissues caused by the bioaccumulation heavy metals. The samples were taken at location that surrounded by Sangan Iron Ore Mine (SIOM) mining activities, in northeastern Iran. The results show that the highest concentrations for the metals were observed in kidney and liver, whereas lowest concentrations were found in muscle of Persian jirds. The concentration of Pb was below the limit of detection. Sex and age were two factors that could explain the different levels of heavy metal bioaccumulation, which affects the concentration of some metals. Adults had significantly higher Cu and Cd levels compared to juveniles. Males bioaccumulated more Zn in their kidneys than females, whereas females bioaccumulated more Fe in their livers. As expected, heavy metals affected various organs of the studied specimens. Hyperemia, hemorrhage, necrosis, and degenerative damage to the epithelial cells of the tubules, the presence of hyaline casts, and in one case, mononuclear leukocyte infiltration, were observed in samples of renal tissue. Hemorrhage and hepatocyte vacuolization were the most common histopathological changes found in samples of hepatic tissue. These effects and the concentrations of heavy metals in the studied specimens indicate the need for monitoring and frequent sampling to evaluate long-term persistent pollutants.

Active pharmaceutical ingredients such as tricyclic antidepressants (TCAs) are contaminants of emerging concern which are commonly detected in wastewater effluent and which can disrupt the behavior of non-target organisms. In aquatic snails, the righting response is a critical behavior that has been shown to be inhibited by exposure to SSRI-type antidepressants. We exposed marine and freshwater snails to three tricyclic antidepressants (clomipramine, amitriptyline, and imipramine) for 1 h and measured righting response time. In the marine mud snail (Ilyanassa obsoleta), all three TCAs significantly increased righting time at concentrations as low as 156 μg/L. Similarly, in the freshwater snail Leptoxis carinata, all three TCAs increased righting time at concentrations as low as 263 μg/L. However, exposure to imipramine from 15.8 to 316 μg/L resulted in significantly faster righting time. Such low-dose stimulation and high-dose inhibition are characteristics of a hormetic response. We discuss the possible physiological mechanism of action of TCAs and other antidepressants on snail behavior, and the occurrence of non-monotonic, hormetic dose responses to human pharmaceuticals in the aquatic environment.

Air pollutants and allergens are the main stimuli that have considerable effects on asthmatic patients’ health. Seamless monitoring of patients’ conditions and the surrounding environment, limiting their exposure to allergens and irritants, and reducing the exacerbation of symptoms can aid patients to deal with asthma better. In this context, ubiquitous healthcare monitoring systems can provide any service to any user everywhere and every time through any device and network. In this regard, this research established a GIS-based outdoor asthma monitoring framework in light of ubiquitous systems. The proposed multifaceted model was designed in three layers: (1) pre-processing, for cleaning and interpolating data, (2) reasoning, for deducing knowledge and extract contextual information from data, and (3) prediction, for estimating the asthmatic conditions of patients ubiquitously. The effectiveness of the proposed model is assessed by applying it on a real dataset that comprised of internal context information including patients’ personal information (age, gender, height, medical history), patients’ locations, and their peak expiratory flow (PEF) values, as well as external context information including air pollutant data (O₃, SO₂, NO₂, CO, PM₁₀), meteorological data (temperature, pressure, humidity), and geographic information related to the city of Tehran, Iran. With more than 92% and 93% accuracies in reasoning and estimation mechanism, respectively, the proposed method showed remarkably effective in asthma monitoring and management.

The ecotoxicological characterization of waste according to the European Waste List (HP14) is part of its hazard classification, which is based on 15 different hazardous properties and should include toxicity tests representing the aquatic and terrestrial compartment. Besides established soil toxicity tests with bacteria, plants, and earthworms, the standardized test with the nematode Caenorhabditis elegans (ISO 10872:2010) is suitable for testing soils and wastes, however, has never been validated for the purpose of waste toxicity assessment. Therefore, 23 different waste samples were tested for their toxicity on growth and reproduction of C. elegans to validate the suitability of ISO 10872 (ISO 2010) for assessing the ecotoxicological hazard of waste and to compare the results with those of other ecotoxicological test systems. C. elegans showed a comparable response to the waste samples as the earthworm avoidance test, however, with single samples where the nematodes indicated a higher toxicity than the E. fetida, thus, providing non-redundant information to the ecotoxicological hazard assessment of wastes. Also due to the short duration (4 days) and small-scale test set-up, the soil toxicity test with C. elegans turned out to be a valuable addition to already existing test batteries, for assessing the ecotoxicity of wastes in the soil compartment.

The present study was carried out to determine the contamination levels of heavy metals in road dust of the National Capital Territory of Delhi (NCT), India and its consequent effect on human and environment. The levels of heavy metals (Pb, Zn, Cu, Cr, Ni, Mn, and Fe) in 9 districts (Z1–Z9) of NCT were monitored and the corresponding human health risk was estimated. District-wise evaluation of heavy metal pollution in the road dust was performed. The mean concentrations of Pb, Zn, Cu, Ni, Cr, Mn, and Fe in the road dust samples over the study area were 164.2 ± 53.2, 200.7 ± 45.3, 99.9 ± 64.8, 24.7 ± 5.7, 57.7 ± 25.9, 241.4 ± 39.8, and 11113.9 ± 1669.7 mg kg⁻¹, respectively. PLI showed a high pollution load in the monitored nine locations, indicating an alarming condition and the urgent need for immediate remedial actions. Ecological risk assessment depicted that a 74% risk was attributed to Pb. Hazard quotient (HQ) values indicated that ingestion was the major pathway of road dust heavy metal exposure to human beings. Hazard index values showed that there was no probable non-carcinogenic risk of the heavy metals present in the road dust of the area. Children were found vulnerable to the risks of road dust metals. The findings of this study showed the alarming status of heavy metal contamination to road dust in NCT and the associated risk to human health.

The natural clay is an abundant, accessible, and low-cost material that has the potential for use in the water and wastewater industry. In this paper, Iranian natural clay and clay/Fe-Mn composite were used to remove toxic arsenic from the liquid environment. The natural clay and clay/Fe-Mn composite were characterized by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), energy-dispersive X-ray (EDX), X-ray diffractometry (XRD), thermo-gravimetric analysis (TGA), and atomic force microscopy (AFM) techniques. The effects of parameters (initial pH, temperature, sorption dose, and contact time) on the efficiency and behavior of the arsenic(V) adsorption process were studied. Freundlich (R² = 0.945 and 0.989), Langmuir (R² = 0.922 and 0.931), modified Langmuir (R² = 0.921 and 0.929), and Dubinin–Radushkevich (R² = 0.706 and 0.723) models were fitted to evaluate the equilibrium data of arsenic(V) adsorption process by natural clay and clay/Fe-Mn composite, respectively. The Langmuir adsorption capacity of arsenic(V) by the natural clay and clay/Fe-Mn composite was determined to be 86.86 mg/g and 120.70 mg/g, respectively. The arsenic(V) adsorption process followed the pseudo-second-order model. Negative values of ΔG° and ΔH° showed that the arsenic(V) sorption by the studied materials is thermodynamically spontaneous and exothermic. According to the findings, the natural clay and clay/Fe-Mn are suitable and recyclable sorbents for arsenic(V) adsorption from aqueous solutions. Also, the composite of clay with iron and manganese can improve the efficiency of clay in the removal of arsenic.