Energy consumption and increasing CO₂ emissions in China are mainly indorsed to the industrial sector. The objective of this study was to explore the main factors driving CO₂ emissions in China’s industry throughout 1991–2016. Based on the log-mean Divisia index (LMDI) method, this study decomposes the change of industry-related CO₂ emissions into energy structure effect, income effect, energy intensity effect, carbon emission, and labor effect. The core results indicate that CO₂ emissions in China’s industry experienced a significant increase from 738.5 to 7271.8 Mt during 1991–2013, while it decreased to 6844.0 Mt in 2016. The income effect and labor effect are the top two emitters, which accounted for increases of 351.8 Mt and 57.8 Mt in CO₂ emissions respectively. Additionally, the energy structure effect also played a role in increasing CO₂ emissions. Energy intensity and carbon emission effects are the most important factors in reducing CO₂ emissions. The policy suggestions about the different period-wise analyses in terms of economic growth, energy structure, and energy intensity are provided.

External feather rinses and homogenized whole-carcass tissue matrix from two hummingbird species found in California (Calypte anna and Archilochus alexandri) were analyzed for the presence of nine insecticides commonly used in urban settings. Using a liquid chromatography-high-resolution mass spectrometry (LC-HRMS) analytical method, samples were quantitatively tested for the following neonicotinoids: dinotefuran, nitenpyram, thiamethoxam, acetamiprid, thiacloprid, clothianidin, imidacloprid, and sulfoxaflor. This analytical method was also used to qualitatively screen for the presence of approximately 150 other pesticides, drugs, and natural products. Feather rinsates from both hummingbird species had detectable concentrations of carbamate and neonicotinoid classes of insecticides. Combined results of the rinsate and homogenized samples (n = 64 individual hummingbirds) showed that 44 individuals (68.75%) were positive for one to four target compounds. This study documented that hummingbirds found in California are exposed to insecticides. Furthermore, feather rinsates and carcass homogenates are matrices that can be used for assessing pesticide exposure in small bird species. The small body size of hummingbirds limits traditional sampling methods for tissues and whole blood to evaluate for pesticide exposure. Thus, utilization of this analytical method may facilitate future research on small-sized avian species, provide insight into pesticide exposure, and ultimately lead to improved conservation of hummingbirds.

Performance of raw and two Fe-loaded biochars, produced either by evaporation (E-product, 26.9% Fe) or precipitation (P-product, 12.6% Fe), was evaluated in batch and column testing for As(V) and Sb(III) removal from contaminated neutral drainage (CND). Batch testing results showed that sorption capacity of the E-product tripled for As(V) and quintupled for Sb(III), whereas for the P-product, it doubled for both contaminants, relative to the raw biochar. Moreover, As(V) removal by the E-product reached 90% in less than 8 h, for initial concentrations up to 50 mg/L. In column testing, the E-product efficiently treated the influent [pH 6; 1 mg/L As(V)] for more than 286 days. The pH of the final effluent was within the legally allowed limits (6–9.5) while less than 0.3 mg/L Fe leached out. Based on these findings, Fe-loaded biochar by evaporation (E-product) seems promising for As(V) treatment in CND.

Solanum nigrum L. is a hyperaccumulator and shows very high phytoremediation potential for Cd-contaminated soil. Fertilizer addition to soil is an effective pathway to improve Cd hyperaccumulation. This article compared the strengthening roles of commonly used four nitrogen fertilizers with three organic fertilizers on S. nigrum hyperaccumulating Cd at the same total nitrogen level. The results showed that Cd concentrations in roots and shoots of S. nigrum were not affected by the addition of inorganic nitrogen like NH₄HCO₃, NH₄Cl, (NH₄)₂SO₄, and CH₄N₂O compared with the control without nitrogen addition. However, Cd concentrations in S. nigrum roots and shoots were significantly decreased (p < 0.05) when the organic nitrogen was added in the form of chicken manure, pig manure, and commercial organic fertilizer (by 15.6% and 15.1%, 30.1% and 23.6%, 20.3% and 16.8%, respectively). On the other hand, of all nitrogen treatments, the addition of (NH₄)₂SO₄ and CH₄N₂O to the soil enormously increased S. nigrum biomass, i.e., S. nigrum shoot biomass increased 2.0- and 2.1-fold compared with the control. Correspondingly, Cd loads in S. nigrum shoots were also the highest in former two treatments and amounted to 79.91 μg pot⁻¹ and 80.17 μg pot⁻¹, respectively. Compared with the control, the addition of three organic fertilizers significantly increased (p < 0.05) pH and decreased (p < 0.05) available Cd concentrations in the soil, which could be the main reasons for their negative effects on S. nigrum accumulating Cd. (NH₄)₂SO₄ and CH₄N₂O significantly increased S. nigrum biomasses and exerted no effects on the available soil Cd concentration, which made them more better fertilizers in practice. In general, the same fertilizer may show different effects on different hyperaccumulators. The selection of fertilizer should be decided in accordance with the specific conditions in the phytoremediation practice of contaminated soil.

Hydrogen can play a crucial role in increasing energy security and reducing greenhouse gases in Pakistan. Hydrogen can only be a clean and sustainable fuel if it is generated from renewable energy sources (RES). Thus, it is important to evaluate viability of RES for hydrogen production. This study developed a two-stage fuzzy MCDM (Multi-criteria decision-making) approach to select the most efficient RES. In the first stage, fuzzy analytical hierarchy process (AHP) obtained the relative weights of four criteria for the selection of best RES. These criteria included commercial potential, environmental impacts, economic benefits, and social acceptance. In the second stage, data envelopment analysis (DEA) measured the relative efficiency of RES using weights of criteria as outputs, and the cost of RES-based electricity generation as input. The results indicated that wind and solar are the most efficient sources of hydrogen production in Pakistan. Municipal solid waste (MSW) and biomass can also be considered a feedstock for the hydrogen economy. Geothermal reported to be the less efficient source and thus is not recommended at present. Sensitivity analysis confirmed the robustness of results obtained using the developed framework.

Artificial bioretention system consisting of Ophiopogon japonicus infiltration medium was used to simulate an infiltration experiment of rainfall runoff. Continuous extraction method was used to detect contents of inorganic phosphorus (P) under exchangeable state (Ex-P) and aluminium phosphate (Al–P) and iron phosphate (Fe–P) at different depths (0, 5, 15 and 35 cm) of soil infiltration medium in bioretention system. Effluent total P (TP) concentration of the system was also monitored. Results indicated that the adsorption of inorganic P, Al–P and Fe–P by soil infiltration medium was implemented layer by layer from top to bottom and gradually weakened. Moreover, Ex-P was gradually transformed into Al–P and Fe–P, whereas Al–P was gradually transformed into Fe–P; thus, Ex-P content reduced layer by layer, whereas Al–P and Fe–P gradually accumulated. The TP removal rate in runoff rainwater by the system was more than 90%, where the TP that was not used by plants was under dynamic equilibrium in water–soil–root system/biological system.

Comprehensive understanding of the influence of soil properties on the potential availability of heavy metals could facilitate soil environment management. This study investigated the distribution of heavy metals and their potential availability in paddy and vegetable fields around electroplating factory outlets and irrigated with its wastewater. The potential availability was assessed using secondary phase fraction (SPF) of heavy metals, including acid-soluble, reducible, and oxidizable fractions resulting from BCR sequential extraction procedure. In total, 94 of topsoil samples (0–20 cm) were collected. Total and SPF concentrations of heavy metals as well as soil physicochemical properties were determined. Multivariable statistical analyses (i.e., principal component analysis (PCA) and redundancy analysis (RDA)) were employed. Results showed that total and SPF concentrations of heavy metals in soil decreased (P<0.05) as sampling distance away from the electroplating factories increased, suggesting that sampling distance was the major parameter that affected gradient variations of both total and potential availability of soil heavy metals. According to PCA, soil samples distributed on the PCA axis representing anthropogenic effect, illustrating that the variation of soil properties resulted from irrigation with electroplating wastewater. RDA and stepwise regression indicated that soil Mn oxides, amorphous Fe oxides, silt content, and pH could explain 68.8% and 43.5% of the variation of SPF concentration in paddy and vegetable garden soil, respectively, suggesting they were the most important factors influencing the potential availability of heavy metals in soils. The potential availability of heavy metals in soil was positively correlated with soil Mn oxides but negatively associated with soil amorphous Fe oxides, indicating that Mn oxides enhanced the potential availability of heavy metals while amorphous Fe oxides reduced the potential availability.

The original publication of this paper contains a mistake. The correct image of figure 2 is shown in this paper.

In this work, a novel composite, ball-milled biochar (BMB) encapsulated in calcium-alginate (CA) beads (CA-BMB), was synthesized as an alternative adsorbent for the removal of methylene blue (MB) from an aqueous solution. Sorption performance was compared among CA, BMB, and CA-BMB composite with batch adsorption experiments. With 25% BMB and 75% alginate, the new composite resembled CA in MB adsorption. With an initial MB concentration of 50 mg L⁻¹, kinetics studies showed that 74% MB removal by CA-BMB was achieved within 8 h, followed by slow kinetics reaching 91% removal in 16 h. The adsorption kinetics was well explained by the Ritchie’s kinetic model, indicative of energetically heterogeneous solid surface of the composite. Adsorption isotherms of BMB, CA, and CA-BMB can all be fitted with the Langmuir models; the adsorption capacity of CA-BMB (1210.7 mg g⁻¹) was close to that of CA (1282.2 mg g⁻¹) and much higher than that of BMB alone (184.1 mg g⁻¹). The outstanding adsorption performance suggested that CA-BMB can serve as a low-cost and eco-friendly adsorbent for MB removal from an aqueous solution.

In this study, Jordanian diatomaceous earth (JDA) and commercial diatomaceous earth (standard diatomaceous earth, SDA) were used for adsorption of samarium (Sm)(III) and neodymium (Nd)(III) ions from aqueous solutions using batch technique as a function of initial concentration of metal ions, adsorbent dosage, ionic strength, initial pH solution, contact time, and temperature. Both adsorbents were characterized by Fourier transform infrared (FTIR), X-ray fluorescence (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer–Emmett–Teller surface area, and cation exchange capacity (CEC). Maximum metal ion uptake was observed after 100 min of agitation, and the uptake has decreased with increasing temperature and reached a maximum at pH ≈ 5. Different types of adsorption isotherms and kinetic models were used to describe the Nd(III) and Sm(III) ion adsorption. The experimental data fitted within the following isotherms in the order Langmuir > Dubinin–Radushkevich (DR) > Freundlich and the pseudo-second-order kinetic model based on their coefficient of determination (R²), chi-square (χ²), and error function (Fₑᵣᵣₒᵣ%) values. Maximum adsorption uptakes, according to the Langmuir model, were obtained as 188.679 mg/g and 185.185 mg/g for Sm(III) and 169.492 mg/g and 149.254 mg/g for Nd(III) by JDA and SDA, respectively. The results of thermodynamic parameters showed that the adsorption of Sm(III) and Nd(III) ions onto JDA and SDA is a feasible, spontaneous, exothermic, and entropy driven. The best recovery for Sm(III) and Nd(III) was obtained when the 0.05 M EDTA + 0.05 M H₃PO₄ mixture was used as an eluent.