The occurrence and spatiotemporal distribution of 12 organophosphate esters (OPEs) were investigated in the sediments collected from Taihu Lake. Compared to the same lake in 2012 (3.4–14 ng/g dw), the concentrations of ∑12 OPEs in sediments ranged from 10.76 to 335.37 ng/g dw and from 8.06 to 425.39 ng/g dw in 2015 and in 2016, respectively, indicating that the OPEs levels in Taihu Lake have aggravated, recently. TEHP was the most abundant compound of the OPEs, which suggested that TEHP was the most widely used around Taihu Lake recently. The positive correlations between some of individual OPEs and the principal components analysis suggested the same potential sources for them. The strong positive correlation between ∑BPs and TOC content indicated that TOC content was one of the factors affected the distribution of ∑OPEs in the sediment. Risk quotient (RQ) for OPEs showed no high eco-toxicity risk in sediment for aquatic organisms.

Heavy metal residues in sediment and Oreochromis niloticus fish muscles, collected from a Nile River Canal (Bahr Shebeen Canal), Egypt, were investigated from September 2014 to December 2015. The spatial and seasonal distributions of Cd, Cu, Fe, Pb, and Zn are described and discussed. Relative abundance of these metals in sediment was found as follows: Fe > Zn > Cu > Pb > Cd. Indices of pollution were used to detect the degree of sediment contamination and indicated elevated concentrations likely to adversely affect benthic and benthic-associated organisms. Anthropogenic activities strongly influenced metal occurrence in sediments. Accumulation of heavy metals in fish muscular tissue was found to be nearly comparable to the sediment. Relative abundance of metals in fish tissue followed the trend of Fe > Zn > Pb > Cu > Cd. Fish can be used as a surrogate for heavy metals pollution. The bioaccumulation factor (BAF) in fish muscle showed the following trend: Pb > Zn > Cu > Fe > Cd. Levels of most selected heavy metals detected in muscular tissue of fish were below admissible limits set by different organizations. However, HI (hazard index) showed that the cumulative risk effects are of considerable concern, especially where fish consumption is high. Consequently, it is recommended that discharged water containing pollutants should be prioritized to include continuous monitoring, and adequate public awareness.

Three common plant species (Dieffenbachia maculata, Spathiphyllum wallisii, and Asparagus densiflorus) were tested against their capacity to remove the air pollutants toluene (20.0 mg m⁻³) and 2-ethylhexanol (14.6 mg m⁻³) under light or under dark in chamber experiments of 48-h duration. Results revealed only limited pollutant filtration capabilities and indicate that aerial plant parts of the tested species are only of limited value for indoor air quality improvement. The removal rate constant ranged for toluene from 3.4 to 5.7 L h⁻¹ m⁻² leaf area with no significant differences between plant species or light conditions (light/dark). The values for 2-ethylhexanol were somewhat lower, fluctuating around 2 L h⁻¹ m⁻² leaf area for all plant species tested, whereas differences between light and dark were observed for two of the three species. In addition to pollutant removal, CO₂ fixation/respiration and transpiration as well as quantum yield were evaluated. These physiological characteristics seem to have no major impact on the VOC removal rate constant. Exposure to toluene or 2-ethylhexanol revealed no or only minor effects on D. maculata and S. wallisii. In contrast, a decrease in quantum yield and CO₂ fixation was observed for A. densiflorus when exposed to 2-ethylhexanol or toluene under light, indicating phytotoxic effects in this species.

Methanotrophs not only oxidize CH₄, but also can oxidize a relatively broad range of other substrates, including trichloroethylene, alkanes, alkenes, and aromatic compounds. In this study, Methylosinus sporium was used as a model organism to characterize toluene metabolism by methanotrophs. Reverse transcription quantitative PCR analysis showed that toluene enhanced the mmoX expression of M. sporium. When the toluene concentration was below 2000 mg m⁻³, the kinetics of toluene metabolism by M. sporium conformed to the Michaelis-Menten equation (Vₘₐₓ = 0.238 g gdᵣy wₑᵢgₕₜ⁻¹ h⁻¹, K ₘ = 545.2 mg m⁻³). The use of a solid-phase extraction technique followed by a gas chromatography-mass spectrometry analysis and molecular docking calculation showed that toluene was likely to primarily bind the di-iron center structural region of soluble methane monooxygenase (sMMO) hydroxylase and then be oxidized to o-cresol. Although M. sporium oxidized toluene, it did not incorporate toluene into its biomass. The coexistence of toluene and CH₄ could influence CH₄ oxidation, the growth of methanotrophs, and the distribution of CH₄-derived carbon, which were related to the ratio of the toluene concentration to biomass. These results would be helpful to understand the metabolism of CH₄ and non-methane volatile organic compounds in the environment.

This report gives a summary of the historic use, former management and current release of polychlorinated biphenyls (PCBs) in Germany and assesses the impact of the life cycle of PCBs on the contamination of the environment and of food products of animal origin. In Germany 60,000 t of PCBs were used in transformers, capacitors or as hydraulic oils. The use of PCB oils in these “closed applications”, has been banned in Germany in 2000. Thirty to 50% of these PCBs were not appropriately managed. In West Germany, 24,000 t of PCBs were used in open applications, mainly as additive (plasticiser, flame retardant) in sealants and paints in buildings and other construction. The continued use in open applications has not been banned, and in 2013, an estimated more than 12,000 t of PCBs were still present in buildings and other constructions. These open PCB applications continuously emit PCBs into the environment with an estimated release of 7–12 t per year. This amount is in agreement with deposition measurements (estimated to 18 t) and emission estimates for Switzerland. The atmospheric PCB releases still have an relevant impact on vegetation and livestock feed. In addition, PCBs in open applications on farms are still a sources of contamination for farmed animals. Furthermore, the historic production, use, recycling and disposal of PCBs have contaminated soils along the lifecycle. This legacy of contaminated soils and contaminated feed, individually or collectively, can lead to exceedance of maximum levels in food products from animals. In beef and chicken, soil levels of 5 ng PCB-TEQ/kg and for chicken with high soil exposure even 2 ng PCB-TEQ/kg can lead to exceedance of EU limits in meat and eggs. Areas at and around industries having produced or used or managed PCBs, or facilities and areas where PCBs were disposed need to be assessed in respect to potential contamination of food-producing animals. For a large share of impacted land, management measures applicable on farm level might be sufficient to continue with food production. Open PCB applications need to be inventoried and better managed. Other persistent and toxic chemicals used as alternatives to PCBs, e.g. short chain chlorinated paraffins (SCCPs), should be assessed in the life cycle for exposure of food-producing animals and humans.

Spent mushroom substrate (SMS) as an organic amendment to plant production has received increasing attention on soil phytoremediation. However, organic amendments are known to contribute to greenhouse gas (GHG) emission from soils. Castor oil plant has a high biomass production and phytoremediation potential for heavy metal-contaminated soils. In the present study, the roles of SMS on phytoremediation efficiency of castor oil plant (Ricinus communis L.) from cadmium (Cd) and nickel (Ni)-contaminated soils were investigated, and the impact of SMS application on methane emission from the contaminated soil were evaluated. Pot experiments with SMS-amended and unamended contaminated soils were conducted to investigate Cd and Ni accumulation in R. communis and CH₄ emission. After growing for 3 months in soils with the addition of Cd (10 mg/kg) and Ni (at rates of 200 and 600 mg/kg), the dry biomass and the concentrations of Cd and Ni in the R. communis were measured, and the mobility factors for Cd and Ni were calculated. To assess methane emission, CH₄ fluxes and potential rates of CH₄ production and oxidation were measured pre- and post-incubation. SMS addition significantly improved the growth of R. communis and gave 19.15~82.46% more dry weight as compared to the single plant cultivation in the contaminated soils. SMS also increased plant Cd uptake and the total amount of Cd accumulation in R. communis increased by 28.1–152.1%, respectively, in signal Cd treatment and Cd-Ni complexation treatment, as compared to the single plant cultivation. The high values of mobility factor for Cd in single plant cultivation and co-application of SMS and R. communis pointed to the potential of R. communis to the Cd mobilization from the contaminated soils. Moreover, the addition of SMS tended to stimulate CH₄ uptake that the average increases in CH₄ uptake rate were 3.84-fold (in controls) and 2.91-fold (in single Cd treated soils) by the co-application of SMS and R. communis as compared to the single plant cultivation. The results suggested that the application of SMS could improve the growth of R. communis in Cd and Ni-contaminated soil, enhance heavy metal bioaccumulation, and stimulate soil CH₄ uptake. Therefore, SMS might be useful for enhancing phytoremediation of heavy metals and mitigate CH₄ emission from the contaminated soil. In addition, results in the study implied that implementing carefully designed management strategies (e.g., application of organic residues) during contaminated soil remediation is a promising solution for agricultural waste management and soil phytoremediation.

Protection of common natural goods is one of the greatest challenges man faces every day. Extracting and processing natural resources such as mineral deposits contributes to the transformation of the natural environment. The number of activities designed to keep balance are undertaken in accordance with the concept of integrated order. One of them is the use of comprehensive systems of tailings storage facility monitoring. Despite the monitoring, system failures still occur. The quantitative aspect of the failures illustrates both the scale of the problem and the quantitative aspect of the consequences of tailings storage facility failures. The paper presents vast possibilities provided by the global monitoring in the effective prevention of these failures. Particular attention is drawn to the potential of using multidirectional monitoring, including technical and environmental monitoring by the example of one of the world’s biggest hydrotechnical constructions—Żelazny Most Tailings Storage Facility (TSF), Poland. Analysis of monitoring data allows to take preventive action against construction failures of facility dams, which can have devastating effects on human life and the natural environment.

This study was aimed to investigate the potential harmful element (PHE) concentrations in coal dust and evaluate the human risk assessment and health effects near coal mining areas. For this purpose, dust samples were collected near various coal mines in Cherat, Pakistan, and analyzed for the PHE concentrations. Determined PHE concentrations were evaluated for the health risk assessment. Results revealed that ingestion was the major pathway as compared to others for PHE exposure. Individual chronic daily intake (CDI) of PHEs was higher than their respective permissible exposure limits set for oral exposure routes by the Agency for Toxic Substances and Disease Registry (ATSDR). Chronic risk or health index (HI) values were observed < 1 for all PHEs and in the order of Pb > Cr > Cd > Ni > Cu > Co > Zn. Higher HI values of Pb, Cr, and Cd could attribute to various chronic health problems as observed during the medical examination survey of this study. Cancer risk (CR) values for this study were observed within the US Environmental Protection Agency (EPA) limits. However, if current practices continued, the PHEs will cross these limits in a near future. Therefore, this study strongly recommends the provision of safety measures, rules, and regulation to avoid health hazards in the future.

In the present study, a four-stroke cycle gasoline engine is redesigned and converted into a six-stroke cycle engine and experimental study has been conducted using gasoline and acetylene as fuel with water injection at the end of the recompression stroke. Acetylene has been used as an alternative fuel along with gasoline and performance of the six-stroke spark ignition (SI) engine with these two fuels has been studied separately and compared. Brake power and thermal efficiency are found to be 5.18 and 1.55% higher with acetylene as compared to gasoline in the six-stroke engine. However, thermal efficiency is found to be 45% higher with acetylene in the six-stroke engine as compared to four-stroke SI engine. The CO and HC emissions were found to be reduced by 13.33 and 0.67% respectively with acetylene as compared to gasoline due to better combustion of acetylene. The NOₓ emission was reduced by 5.65% with acetylene due to lower peak temperature by water injection. The experimental results showed better engine performance and emissions with acetylene as fuel in the six-stroke engine.

The effect of adding different proportions of natural clinoptilolite zeolite (5 and 10%) to food waste vermicomposting was investigated by assessing the physicochemical characteristics, worms’ growth, and maturation time of finished vermicompost in comparison with the vermicompost prepared with no amendment (control). Vermicomposting was performed in 18 plastic containers for 70 days. The experimental results showed that the carbon-to-nitrogen (C/N) ratios were 15.85, 10.75, and 8.94 for 5 and 10% zeolite concentration and control after 70 days, respectively. The addition of zeolite could facilitate organic matter degradation and increase the total nitrogen content by adsorption of ammonium ions. Increasing the proportion of zeolite from 0% (control) to 10% decreased the ammonia escape by 25% in the final vermicompost. The natural zeolite significantly reduced the electrical conductivity (EC). At the end of the process, salinity uptake efficiency was 39.23% for 5% zeolite treatment and 45.23% for 10% zeolite treatment. The pH values at 5 and 10% zeolite-amended treatments were 7.31 and 7.57, respectively, in comparison to 7.10 in the control. The maturation time at the end of vermicomposting decreased with increasing zeolite concentration. The vermicompost containing 5 and 10% zeolite matured in 49 and 42 days, respectively, in comparison to 56 days for the control. With the use of an initial ten immature Eisenia fetida worms, the number of mature worms in the 10% zeolite treatment was 26 more than that in the 5% zeolite treatment (21 worms) and 9 more than that in the control treatment (17 worms). Significantly, natural zeolite showed a beneficial effect on the characteristics of the end-product when used in the vermicomposting of food waste.