In recent years, ornamental plants have come under investigation as phytoremediation agents. In addition to reducing contaminant concentrations in soil, such plants support local economies by serving social (e.g., religious) and decorative purposes. Greenhouse studies investigated the phytostabilization potential of soil cadmium (Cd) by five cultivars of marigold (Tagetes erecta), a common ornamental flower in Asia. The effects of organic (cattle manure and pig manure) and inorganic (leonardite and Osmocote®) amendments in supporting plant growth and enhancing Cd uptake were also examined. Marigold cultivars Babuda and Sunshine grown in soil supplemented with pig manure produced the greatest biomass and experienced greatest Cd accumulation and flower production. In all treatments, plant parts accumulated Cd in the following order: root > shoot ≈ flower. Furthermore, Babuda and Sunshine cultivars had a high phytostabilization potential as evidenced by translocation factors < 1 and bioconcentration factors > 1 for roots. It is proposed that Babuda and Sunshine marigold cultivars be applied toward Cd phytostabilization while enhancing local economies as an ornamental species.

One of the cheapest and proper methods for the ultimate disposal of Municipal Solid Waste (MSW) is landfilling. However, determining the location of landfill sites is a difficult and complex task due to depending on social, environmental, technical, economic, and legal factors. To solve the aforementioned challenges related to the landfill site suitability analysis, the combinations of Geographic Information System (GIS) and Multi-Criteria Decision-Making (MCDM) have been studied by academia and applied by experts over the years. This notice is apparent by the large number of academic papers which have been announced in the near future. To provide a framework of the existing literature, and to guide colleagues, a state-of-the-art of recent papers is crucial. The goal of this study is to review all scientific papers in GIS-based MCDM modeling for landfill site suitability analysis in academic journals. A total of 106 studies published between 2005 and 2019 are recorded and surveyed. The studies are then investigated and classified by a generated taxonomy including following categories: GIS software, application area, uncertainty, MCDM techniques, cell sizes in GIS, and criteria. Based on the review conducted, it is observed that while Analytical Hierarchy Process (AHP) and Weighted Linear Combination (WLC) are the most widely used MCDM methods for weighting the criteria and ranking the alternatives, respectively. On the other hand, while environmental dimension is the most commonly preferred main criteria, surface water comes first in the sub-criteria pool. Criteria analysis shows that surface and ground water, geology, land use, distance to fault zone, distance to urban areas, and distance to road and slope are the most commonly used criteria groups among others. These classifications and observations are helpful for identifying research gaps in the current literature and provide insights for future modeling and research efforts in the field.

The removal of toxic compounds (azo dyes) from dyeing wastewater was investigated by an environmentally friendly activated carbon produced from solid waste generated in the tannery process, the cattle hair (CHW), activated with H₃PO₄ (AC-CHW), suggesting a life cycle extension for this material from leather processing. Preliminary tests with aqueous solutions containing Acid Brown 414 (AB-414) and Acid Orange 142 (AO-142) removed 71.06% and 73.05%, respectively. The activated carbon was characterized by zeta potential (ZP), functional groups (FTIR), elemental composition, sorbent specific surface area, and pore size distribution (BET/BJH). The specific surface area showed low values when compared to commercial activated carbon, but average pore diameter was higher, which facilitates the adsorption of larger and complex molecules, such as those present in real wastewaters. Through SEM and FTIR, the presence of the toxic compounds studied in the AC-CHW after sorption process was observed, where the results indicated that the functional groups of -CH=CH- participated in the removal process for these compounds. The removal efficiency obtained with AC-CHW was 51.94% and 49.73% for the dyeing wastewater containing AB-414 and AO-142, respectively. The obtained results open a promising via to use AC-CHW as efficient eco-friendly sorbent for the treatment of leather wastewater.

In this paper, we have used HDTMA-Br- and NaOH-treated bark powder of Mangifera indica as bio-sorbents for the removal of dysprosium (III) from its aqueous solution. The adsorption process was investigated at different experimental parameters such as contact time, temperature, pH, adsorbent dose, and initial metal concentration. The amount of chemically modified bark powder required was almost two times lesser than raw bark to get a higher percentage removal of the metal ion. The kinetics results revealed the adsorption process follows the nonlinear form a pseudo-second-order model. The negative values of Gibbs free energy change (∆G°) indicated the spontaneity of the adsorption process. The enthalpy change (∆H°) and entropy change (∆S°) of adsorption were 60.97 kJ/mol and 0.48 J/mol K, respectively signified it as an endothermic process. The maximum adsorption capacity was found to be 55.04 mg/g for sorption of Dy (III) on NaOH-treated bark powder and was better fitted to Langmuier model. It was confirmed to follow physisorption process and the activation energy of the system was found to be 41.07 kJ/mol. The possibility of adsorbent and adsorbate interactions were indicated by the FTIR and SEM/EDX analysis.

Quantitative identification of anthropogenic trace metal sources in surface river sediments is vital for watershed pollution control and environmental safety. In this study, we developed a reliable approach by integrating enrichment factor (EF), multiple linear regression of absolute principal component scores (MLR-APCS), and Pb stable isotopes, and applied it to a typical hilly agricultural watershed in Eastern China. Results showed that trace metals have accumulated in the river sediments during long-term agricultural development, with special concern of Cu, Ni, Pb, and Cr that may pose adverse biological effects. Among them, Pb was the most anthropogenically impacted trace metal due to its high EF value, but its excessive concentration still did not exceed background concentration. Based on the excessive trace metal concentrations, atmospheric deposition, livestock manure, and chemical fertilizer were identified as the three major anthropogenic pollution sources, and their respective contributions were further estimated by using MLR-APCS model. Together with natural contributions, atmospheric deposition contributed on average 35.3%, 43.1%, and 30.4% of total Ni, Pb, and Cr concentrations in the sediments, respectively. Similarly, livestock manure contributed 41.0% of total Cu and 40.6% of total Zn concentrations, while chemical fertilizer was responsible for 44.3% of total Cd concentration. For Pb, the source contribution of atmospheric deposition to sediment pollution was also quantitatively assessed by isotopic analysis, which was generally close to the value of 43.1% and therefore verified the EF and MLR-APCS results.

Microcystis aeruginosa, a species of freshwater cyanobacteria, is known to be one of the dominant species causing cyanobacterial harmful algal blooms (CyanoHABs). M. aeruginosa blooms have the potential to produce neurotoxins and peptide hepatotoxins, such as microcystins and lipopolysaccharides (LPSs). Currently, technologies for CyanoHAB control do not provide any ultimate solution because of the secondary pollution associated with the control measures. In this study, we attempted to use the peptide HPA3NT3-A2, which has been reported to be nontoxic and has antimicrobial properties, for the development of an eco-friendly control against CyanoHABs. HPA3NT3-A2 displayed significant algicidal effects against M. aeruginosa cells. HPA3NT3-A2 induced cell aggregation and flotation (thereby facilitating harvest), inhibited cell growth through sedimentation, and eventually destroyed the cells. HPA3NT3-A2 had no algicidal effect on other microalgal species such as Haematococcus pluvialis and Chlorella vulgaris. Additionally, HPA3NT3-A2 was not toxic to Daphnia magna. The algicidal mechanism of HPA3NT3-A2 was intracellular penetration. The results of this study suggest the novel possibility of controlling CyanoHABs using HPA3NT3-A2.

In this paper, we synthesized a polyglycerol(PG)-mediated superparamagnetic graphene oxide nanocomposite called MGON, consisting of PG-modified superparamagnetic iron oxide nanoparticles (SPION) covalently bonded to PG-functionalized graphene oxide (GO). MGON exhibits better dispersibility and colloidal stability in aqueous solution than the magnetic graphene oxide reported in the literature. The physicochemical properties of MGON were analyzed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM), and UV-vis spectroscopy. Applied to the adsorption of tetracycline (TC) in aqueous solution as an adsorbent, the MGON showed excellent adsorption performance with the maximum adsorption capacity of 684.93 mg/g at 298 K. Adsorption kinetics and isotherm results indicate that the adsorption process conforms to the pseudo-second-order kinetics and Langmuir isotherm models. Adsorption thermodynamics has confirmed that the adsorption process of TC on MGON is spontaneous and endothermic. With the increase of temperature, the adsorption capacity of MGON increases continuously, and the adsorption capacity of MGON is the largest when the pH value is 7. Furthermore, the π-π and cation-π interaction, amidation reaction, and hydrogen bonding can be used to explain the adsorption mechanism of TC on MGON. Desorption and regeneration experiments showed that MGON still had 67.65% regenerative performance after five cycles. Hence, MGON is a promising adsorbent in the removal of tetracycline from wastewater.

The presence of natural organic matter such as humic acid in water creates various problems in water purification. Humic acid can react with chlorine in the disinfection step and lead to the production of trihalomethanes and haloacetic acids that these compounds have carcinogenic and mutagenic properties; therefore, they must be removed before arriving to the disinfection stage. The purpose of this research was adsorption of humic acid from simulated wastewater by synthesized FeNi₃/SiO₂/TiO₂ magnetic nanocomposites. FeNi₃/SiO₂/TiO₂ magnetic nanocomposites were synthesized by sol-gel procedure and its characteristics were determined by TEM, VSM, BET, FESEM, and XRD techniques. Then, the effects of such pH (3–11), FeNi₃/SiO₂/TiO₂ dosage (0.005–0.1 g/L), contact time (0–200 min), and initial concentration (2–15 mg/L) were studied on humic acid adsorption using FeNi₃/SiO₂/TiO₂. The results of adsorption experiments revealed that the highest percentage of humic acid removal (94.4%) was achieved at pH 3, initial concentration of 5 ppm, FeNi₃/SiO₂/TiO₂ dose of 0.1 g/L, and contact time of 90 min. The analyses of experimental isotherm data showed that the humic acid adsorption was described by Langmuir model and also the kinetic studies represented that the process of adsorption of humic acid on FeNi₃/SiO₂/TiO₂ was followed by the pseudo-second kinetic. According to the results, it can be concluded that FeNi₃/SiO₂/TiO₂ magnetic nanocomposites have a high ability to absorb humic acid from simulated wastewater.

The Southern Junggar Basin (SJB) in China is an emerging coalbed methane (CBM) development area with abundant low-rank CBM resources. CBM development is accomplished by pumping significant volumes of water from the aquifer, and this water is commonly termed as produced water, which has great utilization values for the water-deficient areas like SJB. Geochemistry signatures are prerequisites in the management of the produced water. Meanwhile, geochemistry surveys of this produced water could also help study the basin hydrogeology and then serve the CBM development. In this study, geochemical compositions of the produced waters, including major ions, stable isotopic compositions, trace elements, and rare earth elements, were analyzed. Results show that produced waters from CBM wells in the SJB are of Na-HCO₃ type and have wide total dissolved solid (TDS) ranges from 963 to 11,916 mg/L (avg. 7417 mg/L). Cl⁻, Na⁺, and HCO₃⁻ are the principal determinates of the TDS contents of the produced waters, and their concentrations all increase with greater depth of the produced waters. Overall, the net results of groundwater−aquifer mineral−bacteria interactions with groundwater flowing along the flow path are to deplete Ca²⁺, Mg²⁺, and SO₄²⁻ and increase Na⁺, Cl⁻, HCO₃⁻, and TDS. Stable isotopic values of the CBM produced waters (δDH₂O and δ¹⁸OH₂O) cluster along or below the local meteoric water line (LMWL), and the shift of stable isotopic values to the right side of LMWL was affected by a joint effect of evaporation and mixing with near-surface water. Trace elements that exceed the regulated concentrations for drinking water of China include As, Fe, Mn, Ba, and Ni, among which Ba and Fe need to be most concerned because over 50% of the CBM produced waters exceed the regulated values. Through principal component analysis, the trace element associations in the CBM produced waters and their potential origins were analyzed. The ∑REY concentrations of the CBM produced waters increase exponentially with the increase of pH and present a certain correlation with TDS. The relationship between ∑REY concentrations and TDS reflects different water–rock reaction degrees and hydrogeological backgrounds.

Oxidative stress is an imbalance between free radicals and antioxidants which leads to reactive oxygen species (ROS) production in cells. Reactive oxygen species contains oxygen radicals that easily react with other molecules in the biological system. For decades, lead acetate (Pb(C₂H₃O2)₂) is used as an additive for many widely used chemical products such as insecticides, hair dyes, and cosmetics; however, contact with lead acetate may irritate skin, eyes, and mucous membranes.In the present study, the antioxidant and anti-inflammatory effect of using ferulic acid to inhibit lead acetate-induced toxicity in rats is investigated. Lead acetate was orally given at a dose of 20 mg/kg body weight for 10 days, either alone or with ferulic acid at dose 25 mg/kg. Serum luteinizing hormone (LH), total testosterone, and follicle-stimulating hormone (FSH) levels were measured. Also, reactive oxygen species (ROS), lipid peroxidation (LPO), total antioxidant capacity (TAC), and catalase (CAT) activities were determined. In addition, histopathological changes of testes and kidney were examined. Results showed that administration of lead acetate induced oxidative stress through attenuation of luteinizing hormone, total testosterone, and follicle-stimulating hormone levels in serum. Moreover, the kidney and testes of lead acetate-treated animals exhibited elevation of ROS level, lipid peroxide levels, as well as lysosomal enzyme activity such acid phosphatase and N-acetyl-β-glucosminidase. DNA fragmentation and histological changes were also observed in lead acetate-treated group. In contrast, ferulic acid treatment reduced the deleterious effects induced by lead acetate in both testes and kidney tissues. These results illustrated that ferulic acid has a protective action against toxicity caused by lead acetate in rats. In conclusions, ferulic acid may have future therapeutic relevance in the prevention of lead acetate-induced testicular and renal toxicity in rats.