Antibiotic-heavy metal multi-pollutants are produced by intensive livestock farming and become an increasingly prominent problem. In this study, the transport behavior of tetracycline (TC) and its chelate with copper ions (Cu-TC) in saturated sand column with and without graphene oxide (GO) prefilled was investigated by laboratory breakthrough experiments. The effects of pH, ionic strength, and the cotransport with GO were studied detailedly. The results showed that the prepared nano-GO had a single- or multilayered sheet structure with a diameter of several μm. The surface of GO contained abundant oxygen-containing functional groups, which imparted it strong hydrophilicity and electronegativity. Pollutant transport experiments showed that decrease of H⁺ weakened the transport ability of TC and Cu-TC. Both Na⁺ and Ca²⁺ promoted the transport of TC, with Ca²⁺ having a much greater effect. The presence of Na⁺ inhibited the transport of Cu-TC, while Ca²⁺ promoted Cu-TC transport. The addition of Cu²⁺ was more favorable for the transport of Cu-TC than TC alone. In the GO-prefilled column, the effluent concentrations of TC and Cu-TC greatly decreased due to adsorption onto GO surfaces. The transport of Cu-TC was more related to GO concentration than TC alone due to the high affinity between GO and Cu-TC. Moreover, the transport behavior of GO in the sand column was consistent with that of the corresponding TC or Cu-TC, indicating that GO could cotransport with TC and Cu-TC multi-pollutants. Our study showed that the GO would interact with TC and Cu-TC and thus have significant influences on the fate and transport of these pollutions in porous media.

Both ultrafine particle and toxicity emissions originating from diesel engine gain an increasing concern. In this study, size distribution and toxicity of particles from a turbocharged common rail engine fueled with clean fuels—dimethyl ether (DME) and biodiesel blends—were investigated. Effects of different DME–biodiesel blends (B0, B5, B10, and B15) and different engine loads were considered. The results demonstrate that particles emitted from DME–biodiesel engine are mainly in form of nucleation mode. Engine running at intermediate load exhausts the maximum number of accumulation mode particles owing to local hypoxia and not high enough combustion temperature. The addition of biodiesel slightly increases the total particle number, peak of particle number concentration, and particle size corresponding to the peak. Effect of biodiesel proportion on particle size distribution gets weaker with the increase of engine load. Engine fueled with B5, B10, and B15 mainly exhausts low molecular weight polycyclic aromatic hydrocarbons (PAHs) (ring number ≤ 4) which are closely related to unburned fuel, and the total PAH emissions are linear versus the fuel consumption. Toxicity equivalent (TE) of particles at low load is lower than that at intermediate load. DME–biodiesel blends with biodiesel mass proportion ≤ 15% can release the DME engine from abrasion and leakage, but no obvious increase in both particle emissions and the risk of particle toxicity.

Intensive greenhouse vegetable production (GVP) has increased the pollution risk of potentially toxic elements (PTEs) in soils. This study examined the accumulation, sources, and potential ecological risk of six PTEs (Cu, Zn, As, Ni, Pb, and Cr) in soil under two GVP (solar greenhouse (SG) and round-arched plastic greenhouse (RAPG)) systems by portable X-ray fluorescence spectroscopy (pXRF) and conventional laboratory analysis. The results indicated that all PTE concentrations were lower than their corresponding thresholds in GVP soils, presenting a low potential ecological risk in both GVP soils according to risk indices (RI ≤ 40.67). As, Ni, Pb, and Cr were not significantly accumulated in both GVP soils. Although Cu and Zn accumulated in both GVP soils, their accumulation extents in SG soil were both greater than that in RAPG soil. Cu and Zn were mainly originated from anthropogenic activities based on multivariate statistical analysis, which were greatly associated with excessive manure application. Overall, pXRF can identify the accumulation difference of PTEs between the two GVP soils, which is generally consistent with conventional laboratory analysis. Hence, pXRF can be a promising alternative to conventional laboratory analysis for rapid assessment of PTEs accumulation, sources, and the potential ecological risk in the two GVP soils. Although PTEs had a low ecological risk, Cu and Zn accumulation in SG soil was increased with the planting years. Therefore, rational application of livestock manure containing high levels of Cu and Zn should inspire strategies to mitigate the environmental risk in GVP soils, especially in SG soil.

BPA, one of the environmental endocrine disruptors, and fructose, reason of liver steatosis which is frequently encountered in the daily diet, contribute to the formation of metabolic syndrome (MetS). This study examines the possible effects of concurrent fructose and BPA administration on MetS and determines the effects of melatonin on this process. In the seven identified groups, a total of forty-two adult male Sprague Dawley rats were treated by following fructose, BPA, and melatonin amounts, separately and together: group 1 (control), group 2 (10% aqueous fructose), group 3 (25 mg/kg BPA), group 4 (10% fructose + 25 mg/kg BPA), group 5 (10% fructose + 20 mg/kg melatonin), group 6 (25 mg/kg BPA + 20 mg/kg melatonin), and group 7 (10% fructose + 25 mg/kg BPA + 20 mg/kg melatonin). At the end of 60 days, histochemical, immunohistochemical, and biochemical procedures were performed on liver tissue. As a result, it was seen that BPA and fructose + BPA induced morphological alteration and inflammation and increased intracellular lipid quantity and amount of collagen and reticular fibers. The percentage of apoptotic liver cells stained by annexin V-FITC/PI was lower in group 7 compared to the group 4 (p < 0,001) and also in group 6 compared to the group 3 (p = 0.014). Both BPA and fructose application caused an increase in lipid peroxidation level due to the increase of oxidative stress. Application of melatonin induced antioxidant enzyme activity and reduced lipid peroxidation level. Our results indicate that fructose and BPA administration triggered the formation of MetS, whereas melatonin healed these variations, although not entirely.

The purpose of this study was to assess the water quality and variations in stable carbon and nitrogen isotopes of particulate organic matter (δ¹³CPOM and δ¹⁵NPOM), as well as to evaluate the sources of carbon and nitrogen that contribute to the POM pools in lakes and reservoirs located in the water-receiving area of the Eastern Route of South-to-North Water Transfer Project (SNWTP) in Northern China. During each season from October 2013 to July 2014, samples of POM from 14 lakes and reservoirs in Northern China were collected. The lakes and reservoirs were meso-eutrophic with considerably high brackish ions (SO₄²⁻, 173 mg/L; Cl⁻, 296 mg/L) in Yangtze River lake, and high total nitrogen: total phosphorus ratio (averaged with 772) or dissolved inorganic nitrogen: soluble reactive phosphorus molar ratios (averaged with 1077) in mountainous reservoirs. The δ¹³CPOM, δ¹⁵NPOM, carbon to nitrogen (C/N) ratios showed significant seasonal variation, with ranges of − 32.5 to − 17.4‰, − 3.6 to 13.5‰, and 5.1–13.2, respectively, while they were hard to be distinguished among types of water sources. Principal component analysis (PCA) indicated that brackish ions, nutrients, and their molar ratios were the main factors influencing variations in δ¹³CPOM and δ¹⁵NPOM. δ¹³CPOM and C/N ratios suggested autochthonous primary production mainly contributed to POM during from April to October, while exogenous organic matter might mainly contribute these carbon pools in January. The low values of δ¹⁵NPOM (< 0‰) and negative correlation between δ¹⁵NPOM and TN suggested discharge of agricultural waste water (e.g., fertilizers, irrigation tailwater) in Bailanghe, Xinan, and Taihe Reservoir during the fertilization season, while higher values indicated domestic sewage input to waterbodies (e.g., Mishan, Gengjing, Donghai Reservoir). Our results suggested that the aquatic ecosystem in water-receiving area of SNWTP would be potentially affected by the inter-basin water diversion, and thus, ecosystem-based strategies were also presented accordingly.

In order to obtain a highly efficient solid-state heavy metal ion absorbing material, the crosslinked polyethylenimine dithiocarbamate was prepared via condensation of polyethyleneimine (PEI) with abundant amino groups and glutaraldehyde to form the crosslinked polymer, reduction of the resulting C=N double bonds to a much stable C–N single bonds, and then grafted with carbon disulfide. The material was evaluated in adsorbing cadmium (II), copper (II), and lead (II) ions. The adsorption behavior of cadmium, copper, and lead ions on the absorbent material was studied. Experiment results show that the adsorption rate is rapid for heavy metal ions, and the adsorption amount tends to constant after 40 min. Its absorption capabilities for cadmium (II), copper (II), and lead (II) ions reach up to 205.99, 215.02, and 451.79 mg/g, respectively. Furthermore, the absorbing material has good desorption and regeneration performance. The adsorption kinetics model well accords with the pseudo-second order kinetic equation. And the process of the adsorption is linear with the Langmuir adsorption model, and thus the adsorption process is monolayer adsorption.

Among alternative fuels, biodiesel has been emphasized as a substantial candidate for diesel engines because of many advantages. However, the main shortcomings preventing more widespread use of biodiesel are high production cost and viscosity. In order to simultaneously overcome both of these shortcomings, the reaction conditions for the transesterification of waste cooking oil (WCO) were optimized using Taguchi and the full factorial design approaches. The analyses of signal to noise ratio and variance were also performed to identify the dominance of reaction conditions on viscosity and biodiesel yield. As a result, the optimal reaction conditions giving the lowest kinematic viscosity (3.991 cSt) and the highest biodiesel yield (98.19%) were determined to be as follows: sodium methoxide amount of 1.00 wt%, reaction time of 60 min, reaction temperature of 55 °C, and methanol to oil molar ratio of 6:1. The catalyst amount and methanol to oil molar ratio were found to be the most significant conditions influencing on the viscosity (10.36% and 78.87% contributions) and the yield (58.48% and 20.17% contributions), respectively. Finally, all physicochemical properties of final waste cooking oil biodiesel (WCOB) produced under optimal reaction conditions were found to meet the EN 14214.

Aquaponics or the integration of aquaculture and hydroponic farming, is a sustainable food production system that is currently popular more as a hobby rather than on commercial scales. Recent increase in scientific and public interest in aquaponics and its environmental benefits supports research that addresses technical, economic, and legislative barriers to wider adoption of these systems. A successful combination of hydroponics with an aquaculture system requires high levels of knowledge and skill that are not necessarily available to all aquaponic practitioners. In this short communication, we analyzed the results of a worldwide survey of commercial aquaponic growers’ statements about their own knowledge base. Most respondents (59%) had some relevant prior knowledge. Surprisingly, many respondents (41%) claimed to have insufficient knowledge of both fish and plants in their first year of operating a commercial aquaponics system. We interpret this as a rough indication that about a third of the new aquaponic businesses are started by entrepreneurs who are not farmers and have no prior training or experience in growing fish or plants. If aquaponics is to become a more widespread commercially viable enterprise and be capable of delivering its environmental benefits, its promotion must consider the importance of prior knowledge held by entrepreneurs entering aquaponics.

The objective of this research project was the design and development of an integrated model for odor emission estimation in wastewater treatment plants. The SMAT’s plant, the largest wastewater treatment facility in Italy, was used as a case study. This article reports the results of the characterization phase that led to the definition and design of the proposed conceptual model for odor emission estimation. In this phase, concentrations of odor chemical tracers (VOC, H₂S, NH₃) and odor concentrations were monitored repeatedly. VOC screening with GC-MS analysis was also performed. VOC concentrations showed significant variability in space and magnitude. NH₃ and H₂S were also detected at considerable concentrations. Results were elaborated to define a spatially variable linear relationship between the sum of odor activity values (SOAV) and odor concentrations. Based on the results, a conceptual operational model was presented and discussed. The proposed system is composed by a network of continuous measurement stations, a set of algorithms for data elaboration and synchronization, and emission dispersion modeling with the application of Lagrangian atmospheric models.

The goal of our investigation is to evaluate the potential protective efficacy of red beetroot extract (RBR) against testicular toxicity produced by CPF in rats. CPF exposure decreased the weight of testis and the levels of luteinizing hormone, follicle stimulating hormone and testosterone. CPF impaired also the oxidative status in favor of pro-oxidant molecules in the testicular tissue. Additionally, CPF stimulated the production of pro-inflammatory cytokines and their gene expression. Concomitantly, an apoptotic cascade has been observed upon CPF intoxication. However, RBR administration protected the testis tissue through modulating the hormonal level, inhibiting the oxidative damage, inflammation and the apoptotic responses following CPF intoxication. The obtained data recommend the use of RBR to prevent CPF-induced testicular damage via antioxidant, anti-inflammatory, and anti-apoptotic pathways.