Triclocarban (TCC), a broad-spectrum lipophilic antibacterial agent, is the main ingredient of personal and health care products. Nonetheless, its ubiquitous presence in the environment has been established to negatively affect the reproduction in humans and animals. In this work, we studied the possible toxic effects of TCC on mouse oocytes maturation in vitro. Our findings revealed that TCC-treated immature mouse oocytes had a significantly reduced rate of polar body extrusion (PBE) compared to that of control. Further study demonstrated that the cell cycle progression and cytoskeletal dynamics were disrupted after TCC exposure, which resulted in the continuous activation of spindle assembly checkpoint (SAC). Moreover, TCC-treated oocytes had mitochondrial damage, reduced ATP content, and decreased mitochondrial membrane potential (MMP). Furthermore, TCC exposure induced oxidative stress and subsequently triggered early apoptosis in mouse oocytes. Besides, the levels of histone methylation were also affected, as indicated by increased H3K27me2 and H3K27me3 levels. In summary, our results revealed that TCC exposure disrupted mouse oocytes maturation through affecting cell cycle progression, cytoskeletal dynamics, oxidative stress, early apoptosis, mitochondria function, and histone modifications in vitro.

Potential risks of polycyclic aromatic hydrocarbons (PAHs) in sediments of a Japanese bay contaminated by carbon manufacturing plant effluent were evaluated by calculating toxicity units (TUs). TUs calculated from the measured whole-sediment concentrations (Cwhole) were often higher than or close to 1, signaling a possible toxicity concern to benthic organisms. In contrast, TUs based on the freely dissolved pore water concentrations (Cfree) measured by an ex-situ passive sampling method with polyethylene strips were 0.0007–0.005, much lower than 1, indicating no effect. We also found that the fractions of black carbon in sediments of the contaminated bay were significantly higher than those of reference sites. Overall, we conclude that carbon manufacturing plant effluent substantially increases Cwhole of PAHs in sediments but also increases the fraction of carbonaceous particles that strongly retain PAHs. As a combined result, bioavailable concentrations (as expressed by pore water Cfree) of PAHs do not increase as much as Cwhole. The results of this study indicate that ecotoxicological risks of PAH contamination by carbon manufacturing plants should be evaluated by directly measuring pore water Cfree instead of Cwhole.

Bees are considered as important providers of ecosystem services, acting via pollination process in crops and native plants, and contributing significantly to the maintenance of biodiversity. However, the decrease of bee's population has been observed worldwide and besides other factors, this collapse is also related to the extensive use of pesticides. In this sense, studies involving the assessment of adverse effects and the uptake of pesticides by bees are of great concern. This work presents an analytical method for the determination of the insecticide abamectin and the fungicide difenoconazole in the stingless bee Melipona scutellaris exposed via oral and topic to endpoints concentrations of active ingredients (a.i.) alone and in commercial formulations and the discussion about its mortality and uptake. For this purpose, QuEChERS (Quick, Easy, Cheap, Efficient, Rugged and Safe) acetate modified method was used for extraction and pesticides were determined by LC-MS/MS. The validation parameters have included: a linear range between 0.01 and 1.00 μg mL⁻¹; and LOD and LOQ of 0.038 and 0.076 μg g⁻¹ for abamectin and difenoconazole, respectively. The uptake of tested pesticides via oral and topic was verified by the accumulation in adult forager bees, mainly when the commercial product was tested. Mortality was observed to be higher in oral exposure than in topic tests for both pesticides. For abamectin in a commercial formulation (a.i.) no differences were observed for oral or topic exposure. On the other hand, for difenoconazole, topic exposure had demonstrated higher accumulation in bees, according to the increase of received dose. Through the results, uptake and the possible consequences of bioaccumulated pesticides are also discussed and can contribute to the knowledge about the risks involving the exposure of bees to these compounds.

Although livestock manure, such as from swine (Sus scrofa domestica), have high capacity to introduce endocrine-disrupting free estrogens into the environment, the frequency of estrogen detections from reconnaissance studies suggest that these compounds are ubiquitous in the environment, perhaps resulting from historic manure inputs (e.g. cattle grazing residues, undocumented historic manure applications) or uncontrolled natural sources. Compared to free estrogens, conjugates of estrogens are innocuous but have greater mobility in the environment. Estrogen conjugates can also hydrolyze to re-form the potent free estrogens. The objective of this study was to identify the transport of free and conjugated estrogens to subsurface tile drains and groundwater beneath fields treated with swine manure slurry. Three field treatments were established, two receiving swine lagoon manure slurry and one with none. Manure slurry was injected into soils at a shallow depth (∼8 cm) and water samples from tile drains and shallow wells were sampled periodically for three years. Glucuronide and sulfate conjugates of 17β-estradiol (E2) and estrone (E1) were the only estrogen compounds detected in the tile drains (total detects = 31; 5% detection frequency; conc. range = 3.9–23.1 ng L(−1)), indicating the important role conjugates played in the mobility of estrogens. Free estrogens and estrogen conjugates were more frequently detected in the wells compared to the tile drains (total detects = 70; 11% detection frequency; conc. range = 4.0–1.6 × 103 ng L(−1)). No correlations were found between estrogen compound detections and dissolved or colloidal organic carbon (OC) fractions or other water quality parameters. Estrogenic compounds were detected beneath both manure treated and non-treated plots; furthermore, the total potential estrogenic equivalents (i.e. estrogenicity of hydrolyzed conjugates + free estrogens) were similar between treated and non-treated plots.

Organophosphate esters (OPEs) are widely used as flame retardants, plasticizers and defoamers and their exposure are likely associated with a number of adverse effects in humans. In this study, tris(chloroethyl) phosphate and thirteen OPE metabolites including six hydroxylated OPEs (HO-OPEs) were analyzed in 46 urine samples, collected from 8 provinces located across different regions in China. 1-Hydroxy-2-propyl bis(1-chloro-2-propyl) phosphate (BCIPHIPP) and 2-hydroxyethyl bis(2-butoxyethyl) phosphate (BBOEHEP) were major metabolites of their parent compounds with detection frequencies of 54.3%–89.1%, which were all higher than their corresponding OPE diesters (2.2%–6.5%). The urine-based estimated daily intake (EDI) of OPEs ranged from 0.06 ng/kg·bw for tris(2-butoxyethyl) phosphate (TBOEP) to 273 ng/kg·bw for 2-ethylhexyl phenyl phosphate. Analyzed with concentrations in paired dust samples, dust exposure to OPEs and their diesters may explain 0.28%–23.8% of the urine-based EDI of OPEs and the contribution of dust TBOEP was the highest. Although direct exposure to OPE diesters in dust showed a minor contribution, their intake via food and drinking water may account for a larger portion of urinary OPE metabolites. Overall, the hazard quotients of four OPEs indicated no immediate exposure risk for the investigated Chinese residents but the cumulative and long-term chronic effects involving exposure to other OPEs and OPE diesters are worth further concerns.

In this study, the positive matrix factorization (PMF) source apportionment model was employed to quantify the contributions of airport activities to particle number concentrations (PNCs) at Amsterdam Schiphol. Time-resolved particle number size distributions in parallel with the concentrations of auxiliary variables, including gaseous pollutants (NOₓ and CO), black carbon, PM₂.₅ mass, and number of arrivals/departures were measured for 32 sampling days over a 6-month period near Schiphol airport to be used in the model. PMF results revealed that airport activities, cumulatively, accounted for around 79.3% of PNCs and our model segregated them into three major groups: (i) aircraft departures, (ii) aircraft arrivals, and (iii) ground service equipment (GSE) (with some contributions of local road traffic, mostly from airport parking lots). Aircraft departures and aircraft arrivals showed mode diameters <20 nm and contributed, respectively, to 46.1% and 26.7% of PNCs. The factor GSE/local road traffic, with a mode diameter of around 60–80 nm, accounted for 6.5% of the PNCs. Road traffic related mainly to the surrounding freeways was characterized with a mode diameter of 30–40 nm; this factor contributed to 18.0% of PNCs although its absolute PNCs was comparable with that of areas heavily impacted by traffic emissions. Lastly, urban background with a mode diameter at 150–225 nm, had a minimal contribution (2.7%) to PNCs while dominating the particle volume/mass concentrations with a contribution of 58.2%. These findings illustrate the dominant role of the airport activities in ambient PNCs in the surrounding areas. More importantly, the quantification of the contributions of different airport activities to PNCs is a useful tool to better control and limit the increased PNCs near the airports that could adversely impact the health of the adjacent urban communities.

Stibnite (Sb₂S₃) dissolution and transformation on mineral surfaces are the fundamental steps controlling the fate of antimony (Sb) in the environment. The molecular-level understanding of Sb₂S₃-mineral-water interfacial reactions is of great importance. Herein, Sb₂S₃ oxidative dissolution and sequestration on pyrite (FeS₂) were explored. The results show that FeS₂ accelerated the rate of Sb₂S₃ oxidative dissolution by a factor of 11.4-fold under sunlight due to heterogeneous electron transfer. The electron transfer from Sb₂S₃ to FeS₂ separated photogenerated hole (h⁺) and electron (e⁻) pairs, facilitating the generation of hydroxyl radicals (OH) on Sb₂S₃ and FeS₂, and superoxide radicals (O₂⁻) on FeS₂. Surface O₂⁻ was the dominant oxidant for Sb(III) oxidation with 91% contribution, as evidenced by radical trapping experiments. OH was preferentially adsorbed on Sb₂S₃, but was released with Sb₂S₃ dissolution, and subsequently contributable to Sb(III) oxidation in solution. The Sb(III) oxidation and sequestration on FeS₂ surface coupled Fe²⁺/Fe³⁺ cycling and inhibited FeS₂ dissolution, as evidenced by X-ray absorption near edge structure and X-ray photoelectron spectroscopy. The insights gained from this study further our understanding of Sb₂S₃ transformation and transport at the environmental mineral-water interfaces.

A widespread monitoring network of Airbox microsensors was implemented since 2016 to provide high-resolution spatial distributions of ground-level PM₂.₅ data in Taiwan. We developed models for estimating ground-level PM₂.₅ concentrations for all the 3 km × 3 km grids in Taiwan by combining the data from air quality monitoring stations and the Airbox sensors. The PM₂.₅ data from the Airbox sensors (AB-PM₂.₅) was used to predict daily mean PM₂.₅ levels at the grids in 2017 using a semiparametric additive model. The estimated PM₂.₅ level at the grids was further applied as a predictor variable in the models to predict the monthly mean concentration of PM₂.₅ at all the grids in the previous year. The modeling–predicting procedures were repeated backward for the years from 2016 to 2006. The model results revealed that the model R² increased from 0.40 to 0.87 when the AB-PM₂.₅ data were included as a nonlinear component in the model, indicating that AB-PM₂.₅ is a significant predictor of ground-level PM₂.₅ concentration. The cross-validation (CV) results demonstrated that the root of mean squared prediction errors of the estimated monthly mean PM₂.₅ concentrations were smaller than 5 μg/m³ and the R² of the CV models of 0.79–0.88 during 2006–2017. We concluded that Airbox sensors can be used with monitoring data to more accurately estimate long-term exposure to PM₂.₅ for cohorts of small areas in health impact assessment studies.

In Dhaka, Bangladesh, fine particulate matter (PM₂.₅) air pollution shows strong seasonal trends, with significantly higher mean concentrations during winter than during the monsoon (winter = 178.1 μg/m³ vs. monsoon = 30.2 μg/m³). Large-scale open burning of post-harvest agricultural waste across the Indo-Gangetic Plain is a major source of PM₂.₅ air pollution in northern India during the non-monsoon period. This study evaluates the extent to which the seasonal differences in PM₂.₅ pollution concentrations in Dhaka are accounted for by biomass-burning vs. fossil-fuel combustion sources. To assess this, an index was developed based on elemental potassium (K) as a marker for biomass particulate matter, after adjusting for soil-associated K contributions. Alternatively, particulate sulfur was employed as a tracer index for fossil-fuel combustion PM₂.₅. By simultaneously regressing total PM₂.₅ on S and adjusted K, the PM₂.₅ mass for each day was apportioned into: 1) fossil-fuels combustion associated PM₂.₅; 2) biomass-burning associated PM₂.₅; and, 3) all other PM₂.₅. The results indicated that fossil-fuel combustion contributed 21.6% (19.5 μg/m³), while biomass contributed 40.2% (36.3 μg/m³) of overall average PM₂.₅ from September 2013 to December 2017. However, the mean source contributions varied by season: PM₂.₅ in Dhaka during the monsoon season was dominated by fossil-fuels sources (44.3%), whereas PM₂.₅ mass was dominated by biomass-burning (41.4%) during the remainder of the year. The contribution to PM₂.₅ and each of its source components by transport of pollution into Dhaka during non-monsoon time was also evaluated by: 1) Conditional bivariate (CBPF) and pollution rose plots; 2) Concentration weighted trajectories (CWT), and; 3) NASA satellite photos to identify aerosol loading and fire locations on high pollution days. The collective evidence indicates that, while the air pollution in Dhaka is contributed to by both local and transboundary sources, the highest pollution days were dominated by biomass-related PM₂.₅, during periods of crop-burning in the Indo-Gangetic Plain.

The increasing production and applications of graphene oxide (GO, a novel carbon nanomaterial) have raised numerous environmental concerns regarding its ecological risks. Triphenyl phosphate (TPhP) disperses in water and poses an increasing hazard to the ecosystem and human health. It is critical to study the environmental responses and molecular mechanisms of GO and TPhP together to assess both chemicals; however, this information is lacking. The present work revealed that GO promoted the bioaccumulation of TPhP in zebrafish larvae by 5.0%–24.3%. The TPhP-induced growth inhibition of embryos (malformation, mortality, heartbeat, and spontaneous movement) at environmentally relevant concentrations was significantly amplified by GO, and these results were supported by the downregulated levels of genes and proteins associated with cytoskeletal construction and cartilage and eye development. TPhP induced negligible alterations in the genes or proteins involved in oxidative stress and apoptosis, but those related proteins were all upregulated by GO. GO and TPhP coexposure activated the mTOR signaling pathway and subsequently promoted apoptosis in zebrafish by potentiating the oxidative stress induced by TPhP, presenting synergistic toxicity. These findings highlight the potential risks and specific molecular mechanisms of combining emerging carbon nanomaterials with coexisting organic contaminants.