Drilling operations release considerable amounts of drilling fluids that contain pollutants such as heavy metals and hydrocarbons. By means of the ICP-OES device, the concentration of metals in the drilling mud deposited in the accumulation pools (around the drill rigs), the drilling mud used in the well (initial, input, and output mud), the soil around the drilling rig, and the control sample can be determined. Comparison of metal accumulation volume with current standards (upper crust and the region’s soil) indicates that the initial drilling mud contains As, Cd, Mo, Cu, and Ag metals. Also, the outflow and associated cuttings are contaminated with Sb, showing a geological formation origin for this metal. In case of Pb, Ba, Cr, and Mn, the level of contamination is in a medium range wherein the source of the contamination is recycled mud and drilling rocks in the previous phases. Contamination of other metals is evaluated in the low range. Geo-accumulation index (Igeo), Enrichment Coefficient (EF), and Contamination Factor (CF) are used to determine the level of pollution. Results show that As, Pb, Ba, Mn, Mo, Cd, Co, Cu, and Zn have caused a lot of pollution in the area and their amounts should be controlled.

This study evaluated the responses of biochemical biomarkers in Astacus leptodactylus exposed to treated municipal effluents discharged into Keban Dam Lake, Elazığ Elazig, Turkey. A. leptodatyclus were exposed to treated municipal effluents and Catalase (CAT), Superoxide dismutase (SOD) activity and lipid peroxidation (TBARS), glutathione (GSH) levels were measured as oxidative stress biomarkers.  SOD activity was increased after exposing to treated municipal effluents for 24th and 96th h. CAT activities were decreased from 25.29 to 14.12 nmol/min/ml compared to control in the group exposed to treated municipal effluents for 24 h but it increased after 96 h exposure. GSH levels were decreased from 9.08 to 3.77 µM compared to control, but MDA levels were increased both at 24 th h and 96 th h after exposure to treated municipal effluents. CAT, SOD activities and MDA and GSH levels in the hepatopancreas of A. leptodactylus are sensitive and suitable biochemical biomarkers for evaluating the toxicity of the treated municipal effluent complex mixtures. Treated municipal effluents exposure was found to cause sub-lethal responses in A. leptodactylus suggesting oxidative stress.

Due to the fish are often at the top of the aquatic food chain and may accumulate large amounts of heavy metals from the water, this study was conducted to determine of Cd, Cr, Pb and Ni contents in the muscle of imported tilapia fish marketed in the city of Hamedan in 2017. In so doing, totally, 27 muscle samples from nine different brands of tilapia fish were randomly collected from the market basket of the study area. After preparation and processing the samples in the laboratory, the concentration of metals, was determined using inductively coupled plasma-optical emission spectrometer. The results showed that the mean concentrations (mg/kg) of Cd, Cr, Pb, and Ni in samples were 0.26 ± 0.09, 1.54 ± 0.15, 0.55 ± 0.11, and 0.67 ± 0.20 respectively. Also, the mean contents of Cd and Pb were higher than the maximum permissible levels (MPL) established by the World Health Organization (WHO). The computed health risk index values showed that no potential health risk for adults and children via consuming the muscle of tilapia fish at the current consumption rate for the study area. Based on the results, due to the mean contents of Cd and Pb in the muscle samples of tilapia fish were higher than the MPL, therefore, serious attention to the reduction of the discharge of hazardous substances in the aquatic ecosystems and also periodic monitoring of chemical residue particularly toxic heavy metals in the high-demand food is recommended.

The human health impacts caused due to exposure to criteria outdoor air pollutants PM2.5, PM10 and NO2 were assessed in present study. The human health effects associated with exposure to atmospheric air pollution in NCT Delhi were estimated utilizing the AirQ+ v1.3 software tool integrated with Ri-MAP during the study period 2013-2018 considering 80% of the whole population subjected to air pollution exposure. Taking into account the World Health Organization (WHO) (2016) guidelines, the inter-annual average concentrations of PM2.5, PM10, and NO2, concentration response relationships and population attributable fraction (AF) or impact fraction (IF) concepts were adopted. The excess number of cases (ENCs) of Mortality (all) natural cases 30+ years, acute lower respiratory infection (ALRI), lung cancer (LC), ischaemic heart disease (IHD), stroke, incidence of chronic bronchitis in children, postneonatal infant mortality, chronic obstructive pulmonary disease (COPD), prevalence of bronchitis in children, incidence of asthma symptoms in asthmatic children in the year 2013 were 48332, 2729, 5645, 26853, 22737, 120754, 34510, 5125, 9813, 3054, 17203 and 682, respectively. Within half of a decade i.e. in year 2018, the ENCs of Mortality (all) natural cases 30+ years, ALRI, COPD, LC, IHD, stroke, incidence of chronic bronchitis in children, postneonatal infant mortality, prevalence of bronchitis in children, incidence of asthma symptoms in asthmatic children increased significantly and were 72254, 3471, 6547, 7568, 32358, 28233, 150110, 50810, 9019, 862, 29570 and 1189, respectively.

O-Anisidines (OAs) are extensively used as an intermediate for chemical reactions to produce various triphenylmethane and azo dyes, and also in manufacturing numerous pigments. They are found to be highly toxic and have carcinogenic properties, so it is imperative to treat OA solutions before disposal. In this study a promising approach to degrade OA solutions has been carried out using Fenton’s reagent. Oxidation trials were conducted for 24 hours and various parameters – OA removal, pH, effect of H2O2 and Fe2+, and COD removal – were analysed to understand the oxidative degradation of OA. For varying initial OA concentrations, the OA and COD removal efficiencies of 72 to 85% and 62 to 74%, respectively, were obtained at pH = 3, and at different optimum H2O2 and Fe2+ doses. Lower initial concentrations of OA showed better removal efficiencies. The reaction time was estimated to 360 minutes after which there was negligible degradation occurs.

With an increase in the global pollution, there is requirement for an alternative to the fossil fuels. Non-edible vegetable oils are highly promising for producing liquid fuels like diesel. Jatropha is a potential feedstock for biodiesel, currently utilized in India and many parts of the world. The optimization of reaction conditions such as temperature, time, catalyst and molar ratio for biodiesel production is important in reactor design. However, oils have characteristics reaction properties for optimum yield. Therefore, there is the need to identify such parameters in Jatropha oil ethyl esters production. Preparation of biodiesel from Jatropha oil ethyl esters using conventional homogeneous process. Optimization of Jatropha ethyl esters using Response surface methodology is done and data so obtained are fed to the design experiment software for analysis. The Jatropha ethyl esters yield was 92.62%. Maximum production of Jatropha oil ethyl ester was achieved with the process parameters viz molar ratio 8.5, reaction time 89.67min, reaction temperature 70.1°C and catalyst.0.62wt%.

The aim of this study was to compare the selected aquatic plants ability to remove nitrate from wastewater. Excess of these nutrients in water can directly affect human health (methemoglobinaemia) or indirectly through the products of secondary pollution include eutrophication. Negative impact of nutrients excess in surface water often causes the destruction of water ecosystems, and therefore, common substances of these elements must be monitored and managed. Spectrophotometric technique was commonly used for quick and simple analyses of nutrients in waste water. There are calibration curves for each nutrient and for the determination of their concentration. Phytotechnology is one of the biological wastewater treatment methods or processes to eliminate nitrate contaminant from aquatic system. So as to avoid the eutrophic formation of fresh water and to determine the efficiency of nitrate utilization by specific aquatic plants which include Utricularia aurea and Salvinia molesta were collected from a eutrophic lake at Theerthamkara, Kerala. The samples were allowed to grow in nitrate solution for about one month at different concentrations. The optical density (OD) of nitrate solution at 410 nm was measured on alternative days of the experiment by using UV spectrophotometer. After 33 days of treatment periods, the maximum amount of nitrate removed in terms of percentage was found to be 95% by Utricularia aurea and 92% by Salvinia molesta at 100 ppm nitrate concentration. The results revealed that the aquatic plant (carnivorous) based system of phytotechnology was productively removed the nitrate load from the synthetic wastewater containing nitrate.

This study utilized Swietenia mahagoni bark–a wood processing industry waste, for the preparation of activated carbon, and then investigated for the removal of methyl orange (MO) dye by the Swietenia mahagoni bark activated carbon (SMBAC). The effect of pH (3–10), adsorbent dose (1–30 g/L), initial MO dye concentration (10–100 mg/L), and contact time (1–240 min) were evaluated. The surface morphology of the SMBAC was characterized by using fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). Maximum removal efficiency of MO by SMBAC was 92%, when initial MO dye concentration was 10 mg/L, pH 3.0, adsorbent dose 10.0 g/L and 120 min equilibrium contact time. The adsorption data fitted well with the Freundlich (R2=0.997) and Halsey (R2=0.997) isotherm models than the Langmuir (R2=0.979) model, and express the multilayer adsorption on heterogeneous surface. The maximum adsorption capacity was 6.071 mg/g. The kinetics data were fitted well to pseudo-second order model (R2=0.999) and more than one process were involved during adsorption mechanism but film diffusion was the potential rate controlling step.  The study results showed that SMBAC adsorbed MO effectively, and could be used as a low cost potential bioadsorbent for the removal of anionic dyes in wastewater treatment.

In this study, a strain of lactic acid bacteria Streptococcus salivarius was studied for its capacity to remove hexavalent chromium (Cr (VI)) from a liquid medium and to form biofilm. Both properties are useful for using the strain in bioremediation of metal-contaminated effluents. For biofilm formation capacity, three methods were used: the tube method (TM), the Congo red agar method (CRA) and adherence to polystyrene tissue culture plate method (TCP). S. salivarius, showed a positive-biofilm and a correlation between the three methods was noted. The bacterial surface hydrophobicity was studied using the microbial adhesion to solvents method (MATS). On AISI-316 L stainless steel, the strain with a hydrophobic surface showed a good adhesion on this support after 18 h incubation. The colonization of the supports and the biofilms formation by the bacterial cell was observed using scanning electron microscopy (SEM). The minimum inhibitory concentration (MIC) of Cr(VI) on S. salivarius was determined on MRS broth, it was relatively high and equal to 400mg/l. In addition, it displayed a remarkable capacity to reduce Cr(VI) concentration on the liquid medium containing initially 50 mg/l of Cr(VI) ; the percent removal rate was equal to approximately 42% after 72 h of incubation at 37 °C. In addition to its GRAS status, the obtained results suggested that S. salivarius could be successfully used in Cr(VI) bioremediation.

Ships transport about 80 percent of world trade and transfer approximately three to five billion tons of ballast water internationally every year. Due to the likely presence of pollutants, the ballast water discharged by ships can have negative effects on aquatic ecosystems. This study was conducted on 10 ships that entered the Bushehr port to determine the effectiveness of the ballast water exchange method and also to specify the contents of heavy metals (Ni, Cd, Pb and Cu) in the water and sediment of the ships’ ballast tanks. The samples were collected from January 2017 to July 2018 during a cold and a hot season. The results indicate the values of heavy metals in the samples in this order: Ni> Cu > Pb > Cd. The heavy metals concentrations in the sediment samples did not exceed the standard of the National Oceanic and Atmospheric Administration (NOAA). Whereas, Cu and Ni in all water samples and Cd in samples 2 and 7 exceeded the NOAA quality standard value. A correlation analysis of the metals showed that the sources of heavy metals vary in water and sediment samples, except for Pb and Cu in sediment samples which a positively significant relationship were observed. The results also revealed that the ballast water exchange method cannot by itself be effective and an efficient management together with continuous monitoring seems to be essential to prevent pollution of the ballast tanks of the ships entering the Bushehr port.