One of the strategies to realize a nitrogen cycle society, we attempted to recover ammonium ions from industrial wastewater, especially sewage water with adsorbent materials. We have developed an adsorbent with high ammonium selectivity based on copper hexacyanoferrate and granulated it as pellets. Using a compact column system filled with this granule adsorbent, ammonium ions were recovered from sewage containing 1000–1500 mg-NH₄⁺/L ammonium ions. Despite the coexistence of many metal ions, the adsorbent selectively and stably adsorbed ammonium ions. Furthermore, it was shown that the saturated adsorbent can be regenerated by flowing a potassium ion solution through a column adsorbent to desorb ammonium ions. In other words, the column can be used repeatedly, and there was almost little deterioration in adsorption even after 250 cycles. In addition, it was shown that by increasing the number of stages of this column, it is possible to sufficiently reduce the ammonium in the adsorbent solution and recover the concentrated ammonium solution.

Air and seawater samples were collected in 2016 over the North Pacific Ocean (NPO) and adjacent Arctic Ocean (AO), and Polycyclic Aromatic Hydrocarbons (PAHs) were quantified in them. Atmospheric concentrations of ∑₁₅ PAHs (gas + particle phase) were 0.44–7.0 ng m⁻³ (mean = 2.3 ng m⁻³), and concentrations of aqueous ∑₁₅ PAHs (dissolved phase) were 0.82–3.7 ng L⁻¹ (mean = 1.9 ng L⁻¹). Decreasing latitudinal trends were observed for atmospheric and aqueous PAHs. Results of diagnostic ratios suggested that gaseous and aqueous PAHs were most likely to be related to the pyrogenic and petrogenic sources, respectively. Three sources, volatilization, coal and fuel oil combustion, and biomass burning, were determined by the PMF model for gaseous PAHs, with percent contributions of 10%, 44%, and 46%, respectively. The 4- ring PAHs underwent net deposition during the cruise, while some 3- ring PAHs were strongly dominated by net volatilization, even in the high latitude Arctic region. Offshore oil/gas production activities might result in the sustained input of low molecular weight 3- ring PAHs to the survey region, and further lead to the volatilization of them. Compared to the gaseous exchange fluxes, fluxes of atmospheric dry deposition and gaseous degradation were negligible. According to the extrapolated results, the gaseous exchange of semivolatile aromatic-like compounds (SALCs) may have a significant influence on the carbon cycling in the low latitude oceans, but not for the high latitude oceans.

Fabric and foam samples from popular children car seats marketed in the United States during 2018 were tested for fluorine content by particle-included gamma ray emission spectroscopy (PIGE, n = 93) and X-ray photoelectron spectroscopy (XPS, n = 36), as well as for per- and polyfluoroalkyl substances (PFAS) by liquid and gas chromatography mass spectrometry (LC/MS and GC/MS, n = 36). PFAS were detected in 97% of the car seat samples analyzed with MS, with total concentrations of 43 PFAS (∑PFAS) up to 268 ng/g. Fabric samples generally had greater ∑PFAS levels than foam and laminated composites of foam and fabric. The three fabric samples with the highest total fluorine content as represented by the highest PIGE signal were also subjected to ultraviolet (UV) irradiation and the total oxidizable precursor (TOP) assay. Results from these treatments, as well as the much higher organofluorine levels measured by PIGE compared to LC/MS and GC/MS, suggested the presence of side-chain fluorotelomer-based polymers (FTPs), which have the potential to readily degrade into perfluoroalkyl acids (PFAAs) under UV light. Furthermore, fluorotelomer (meth)acrylates were found to be indicators for the presence of (meth)acrylate-linked FTPs in consumer products, and thus confirmed that at least half of the tested car seats had FTP-treated fabrics. Finally, extraction of selected samples with synthetic sweat showed that ionic PFAS, particularly those with fluorinated carbons ≤8, can migrate from fabric to sweat, suggesting a potential dermal route of exposure.

Cadmium (Cd) is being frequently detected in marine organisms. However, dose-dependent effects of Cd challenged unraveling the toxicological mechanisms of Cd to marine organisms and developing biomarkers. Here, the dose-dependent effects of Cd on clams Ruditapes philippinarum following exposure to 5 doses of Cd (3, 9, 27, 81, 243 μg/L) were investigated using benchmark dose (BMD) method. By model fitting, calculation of BMD values was performed on transcriptomic profiles, metals concentrations, and antioxidant indices. Cd exposure induced not only significant Cd accumulation in clams, but also marked alterations of essential metals such as Ca, Cu, Zn, Mn, and Fe. Gene regulation posed little influence on essential metal homeostasis, indicated by poor enrichment of differentially expressed genes (DEGs) associated with metal binding and metal transport in lower concentrations of Cd-treated groups. BMD analysis on biological processes and pathways showed that peptide cross-linking was the most sensitive biological process to Cd exposure, followed by focal adhesion, ubiquitin mediated proteolysis, and apoptosis. Occurrence of apoptosis was also confirmed by TUENL-positive staining in gills and hepatopancreas of clams treated with Cd. Furthermore, many DEGs, such as transglutaminases (TGs), metallothionein (MT), STEAP2-like and laccase, which presented linear or monotonic curves and relatively low BMD values, were potentially preferable biomarkers in clams to Cd. Overall, BMD analysis on transcriptomic profiles, metals concentrations and biochemical endpoints unraveled the sensitiveness of key events in response to Cd treatments, which provided new insights in exploring the toxicological mechanisms of Cd in clams as well as biomarker selection.

Horse mackerel is a semi-pelagic species found in abundance in the Moroccan coasts and occupies the first ranks in the catches landed by the coastal fleet. In this study, we investigated the ingestion of Polyamide, Acrylic and Polystyrene by Atlantic horse mackerel, in the Moroccan Atlantic coastal area located between Larache (35°30′N) and Boujdour (26°30′N). The objective is to map the spatial distribution of horse Mackerel containing microplastics (MPs) in their stomachs and identify hot spot areas. We also aim to verify the most ingested polymer by this fish characterized by significant daily vertical migrations. The results show that the three studied polymers were detected in the stomach contents of more than 73% of studied fishes. The hot spot areas are located more in the northern part where urbanization and fishing activity are important. Polyamide, the densest polymer, is the most abundant (86% of cases), followed by acrylic. These two polymers were found in association in 47% of cases. No correlation between the presence of MPs in the stomach contents and the size of the individual fishes was noted. Interestingly, the group of mature specimens ingested more MPs than the immature group.

Artificial light at night has been proposed as a global threat to biodiversity. Insectivorous bats are strictly nocturnal animals that are vulnerable to disruption from artificial light. Given that many light-sensitive bats tend to avoid night light during roost departure, it is often assumed that nighttime light pollution reduces their foraging opportunities, albeit empirical evidence in support of this hypothesis remains elusive. Here, we used least horseshoe bats, Rhinolophus pusillus, to assess whether white artificial light is detrimental for the opportunities of foraging. We manipulated the levels of ambient illumination and perceived predation risk inside the bat roost. We monitored bats' emergence activity using high-speed video and audio recording systems. DNA-based faecal dietary analysis and insect survey were applied to determine activity time of prey in foraging areas. Following experimentally manipulation of white light-emitting diode (LED) lighting 0–15 min after sunset, bat pass, flight duration, and echolocation pulse emission decreased. The mean emergence time of bats flying out was delayed by 14 min under lit treatment compared with the dark control. Only 10% of bats left for foraging during 40 min of light exposure. Aversive effects of LED light on bat emergence were robust regardless of the presence of a potential predator. Insect prey reached a peak of abundance between 30 and 60 min after sunset. These results demonstrate that white artificial light hinders evening emergence behavior in least horseshoe bats, leading to a mismatch between foraging onset and peak food availability. Our findings highlight that light pollution overrides foraging onset, suggesting the importance of improving artificial lighting scheme near the roosts of light-sensitive bats.

Insight in the phosphorus (P) flows and P balances in the food chain is largely unknown at county scale in China, being the most appropriate spatial unit for nutrient management advice. Here, we examined changes in P flows in the food chain in a typical agricultural county (Quzhou) during 1980–2017, using substance flow analyses. Our results show that external P inputs to the county by feed import and fertilizer were 7 times greater in 2017 than in 1980, resulting in a 7-fold increase in P losses to the environment in the last 3 decades, with the biggest source being animal production. Phosphorus use efficiency decreased from 51% to 30% in crop production (PUEc) and from 32% to 11% in the whole food chain (PUEf), but increased from 4% to 7% in animal production (PUEa). A strong reduction in P inputs and thus increase in PUE can be achieved by balanced P fertilization, which is appropriate for Quzhou considering a current average adequate soil P status. Fertilizer P use can be reduced from 7276 tons yr⁻¹ to 1765 tons yr⁻¹ to equal P removal by crops. This change would increase P use efficiency for crops from 30% to 86% but it has a negligible effect on P losses to landfills and water bodies. Increasing the recycling of manure P from the current 43%–95% would reduce fertilizer P use by 17% and reduce P losses by 47%. A combination of reduced fertilizer P use and increased recycling of manure P would save fertilizer P by 93%, reduce P accumulation by 100% and P loss by 49%. The results indicate that increasing manure-recycling and decreasing fertilizer-application are key to achieving sustainable P use in the food chain, which can be achieved through coupling crop-livestock systems and crop-based nutrient management.

Critical loads are thresholds of atmospheric deposition below which harmful ecological effects do not occur. Because lichens are sensitive to atmospheric deposition, lichen-based critical loads can foreshadow changes of other forest processes. Here, we derive critical loads of nitrogen (N) and sulfur (S) deposition for continental US and coastal Alaskan forests, based on nationally consistent lichen community surveys at 8855 sites. Across the eastern and western US ranges of 459 lichen species, each species' realized optimum was the N or S atmospheric deposition value at which it most frequently occurred. The mean of optima for all species at a site, weighted by their abundances, was defined as a community “airscore” indicative of species’ collective responses to atmospheric deposition. To determine critical loads for adverse community compositional shifts, we then modeled changes in airscores as a function of deposition, climate and forest habitat predictors in nonparametric multiplicative regression. Critical loads, indicative of initial shifts from pollution-sensitive toward pollution-tolerant species, occurred at 1.5 kg N ha⁻¹ y⁻¹ and 2.7 kg S ha⁻¹ y⁻¹. Importantly, these critical loads remain constant under any climate regime nationwide, suggesting both simplicity and nationwide applicability. Our models predict that preventing excess N deposition of just 0.2–2.0 kg ha⁻¹ y⁻¹ in the next century could offset the detrimental effects of predicted climate warming on lichen communities. Because excess deposition and climate warming both harm the most ecologically influential species, keeping conditions below critical loads would sustain both forest ecosystem functioning and climate resilience.

Vehicle emissions are an important source of particulate matter (PM) in urban areas and have well-known adverse health effects on human health. Oxidative potential (OP) is used as a quantification metric for indexing PM toxicity. In this study, by using a liquid spot sampler (LSS) and the dithiothreitol (DTT) assay, the diurnal OP variation was assessed at a ground-level urban monitoring station. Besides, since the monitoring station was adjacent to the main road, the correlation between OP and traffic volume was also evaluated. PM components, including metals, water-soluble inorganic aerosols (WSIAs), black carbon (BC), and polycyclic aromatic hydrocarbons (PAHs), were also simultaneously monitored. The daytime and evening mean ± std volume-normalized OP (OPv) were 0.46 ± 0.27 and 0.48 ± 0.26 nmol/min/m³, and exhibited good correlations with PM₁.₀ and BC; however, these concentrations were only weakly correlated with mass-normalized OP (OPm). The mean ± std OPm was higher in the daytime (41.3 ± 13.8 pmol/min/μg) than in the evening (36.1 ± 11.5 pmol/min/μg). According to the PMF analysis, traffic emissions dominated the diurnal OP contribution. Organic matter and individual metals associated with non-exhaust traffic emissions, such as Mn, Fe, and Cu, contributed substantially to OP. Diurnal variations of PAH concentrations suggest that photochemical reactions could enhance OP, highlighting the importance of atmospheric aging on PM toxicity.

As a driving factor of global changes, microplastics have gradually attracted widespread attention. Although MPs are extensively studied in aquatic systems, their presence and fate in terrestrial systems and soil are not fully understood. In China, construction-land must be mulched by dust-proof nets to prevent and control fine particulate pollution, which may cause MPs pollution and increase ecological risks. In order to understand the pollution characteristics and sources of MP in the soil covered by dust nets, we conducted a case study in Beijing. Our results revealed that the abundance of MPs in soil mulched by dust-proof nets ranged from 272 to 13,752 items/kg. Large-sized particles (>1000 μm) made up a significant proportion (49.83%) of MPs in the study area. The dominant MP polymer types were polyethylene (50.12%) and polypropylene (41.25%). The accumulation of MPs in construction-site soil mulched by dust-proof nets (average, 4910.2 items/kg) was significantly higher (P < 0.05) than that in unmulched soil (average, 840.8 items/kg), which indicates a dust-proof nets as an essential source of microplastics in the soil of construction land. We applied a remote-sensing data analysis technique based on remote imagery acquired from a high-resolution remote-sensing satellite combined with deep-learning convolutional neural networks to automatically detect and segment dust-proof nets. Based on high-resolution remote sensing images and using a U-net convolutional neural network, we extract the coverage area of Beijing’s dust-proof nets (18.6 km²). Combined the abundance of MPs and the dust-proof nets’ coverage area, we roughly estimate that 7.616 × 10⁹ to 3.581 × 10¹¹ MPs accumulated in the soil mulched by the dust-proof nets in Beijing. Such a large amount of MPs may cause a series of environmental problems. This study will highlight the understanding of soil MPs pollution and its potential environmental impacts for scientists and policymakers. It provides suggestions for decision-makers to formulate effective legislation and policies, so as to protect human health and protect the soil and the wider environment.